Yarisworld Archive

cel-maf sensor

12 posts · 5,165 views

staypuftOriginal postchicago · Jun 8, 2010#1
so lately i been popping a cel p0101 which i looked up and it was my maf sensor acting up. i am currently running a blitz sc, 1zz fuel injectors, fujita cai. i have had no problems running this setup for almost a year. now i am always throwing a code, i have cleaned the sensor multiple times and it just seems to throw this code alot. is it time to buy a new maf? i have also noticed that the oring is wearing out, would that play a big factor? thanks for the help.

Replies 11

auxmikeLI, New Yawk · Jun 8, 2010#2
I've been buying mission critical spares little by little.
Cheap insurance.....👍

1 attachment not included in this copy

staypuftThread starterchicago · Jun 8, 2010#3
yeah ill be dropping by the dealership later and picking up one
hatchbackkid82. · Jun 9, 2010#4
how much for one of these sensors?
staypuftThread starterchicago · Jun 19, 2010#5
update, so i bought a new maf and 1 week later still popped a cel, im thinking i should just put my stock airbox in to test if it the cai, its weird since i had the cai for almost 3 years and this is happening.
lilredrocketDFW, Texas · Jun 19, 2010#6
Do you have any pending codes?
staypuftThread starterchicago · Jun 19, 2010#7
Originally Posted by lilredrocket ↑
Do you have any pending codes?
p0101, thats it, im thinking of putting back 1nz injectors or changing back to stock airbox, the last mod i did was changing the injectors. so i will start with that i guess
lilredrocketDFW, Texas · Jun 19, 2010#8
What type of code reader are you using?
staypuftThread starterchicago · Jun 19, 2010#9
i have a scangauge, and my buddy used some other highend reader, not sure of the brand but he said it the same as the techs use.
lilredrocketDFW, Texas · Jun 20, 2010#10
Get your friends again and see if you have any pending codes. My scanner at work can read them
JImbo_2400NY · Jul 12, 2010#11
I've had the same problem. I put in a K&N cai and after about 200 miles the cel came on with the P0101 code. I called K&N and they couldn't explain it, they just kept saying there must be vacuum leak somewhere but I put hose clamps on every vacuum line and checked all the connections on the cai but no luck. I just drive it now with the light on.
yarrrnew mexico · Jul 12, 2010#12
For the fujita, search on MI forums for fujita fail. Make sure the support didn't rip a hole in your pipe as has happened to 2 users.

Also, on my SRI, I used a silicon sealant in between the pipe and the MAF. I've yet to see a CEL or have even a second of rough idle or anything.