Yarisworld Archive

205 45 16

21 posts · 10,423 views

trx73Original postKingston, Ontario · May 28, 2010#1
Hey there, I just bought a 2006 Yaris and picked up 16x7 rims with no offset. I am torn on what size tires to get. I am worried that 205 45 16 will leave too much of a gap in the wheel well and if I go 205 50 16 I am worried about rubbing . I don't plan on lowering the car for some time but I still want it too look good. Any thoughts???

Replies 20

MUSKOKA800Chatham, Ontario, Canada · May 28, 2010#2
Zero offset and rubbing may be synonymous for a Yaris. 35-45 mm offset is the norm.
thebarberGrand Rapids, MI · May 28, 2010#3
i run 205-45-16's....pic while on coilovers with about 2" drop front/rear

Picture not included in this copy

on eibach sportlines...1.25/1.5" f/r drop

Picture not included in this copy

Picture not included in this copy
trx73Thread starterKingston, Ontario · May 28, 2010#4
Think I could get away with 205 50 16 with zero offset??
Bluevitz-rsOshawa, Ontario, Canada · May 28, 2010#5
Originally Posted by trx73 ↑
Think I could get away with 205 50 16 with zero offset??
Maybe if you don't put tires on at all you MIGHT not have rubbing issues, but it won't matter what tire you put on it'll rub. Zero offset put rim outside of the fenders entirely.
trx73Thread starterKingston, Ontario · May 28, 2010#6
I am assuming it is zero offset as I am sure it would be stamped on the back...wouldn't it??? Sorry I am very new to this. Is there another way to tell. I bought them used and they came from a civic.
thebarberGrand Rapids, MI · May 28, 2010#7
Originally Posted by trx73 ↑
I am assuming it is zero offset as I am sure it would be stamped on the back...wouldn't it??? Sorry I am very new to this. Is there another way to tell. I bought them used and they came from a civic.
take a hi resolution pick of the back of the wheel....and maybe the front too?
severous01SE Texas · May 28, 2010#8
with a tape on the hub.

i'm sure there's some offset, it's extremely rare to find rims with no offset. those are like truck wheels or something...
kimonaHuntington Bch, CA · May 28, 2010#9
What is the make/model of the wheels? Post some photos.

The offset is often stamped on the back of the wheel.
ddongbaphay · May 28, 2010#10
Originally Posted by thebarber ↑
i run 205-45-16's....pic while on coilovers with about 2" drop front/rear

Picture not included in this copy

on eibach sportlines...1.25/1.5" f/r drop

Picture not included in this copy

Picture not included in this copy
WHAT THE FUCK THAT FIRST PICTURE IS SO COOL BARBRA.
BilliamUSA · May 28, 2010#11
Long exposure + "painting" with a flashlight = what you see in the pic.
Bluevitz-rsOshawa, Ontario, Canada · May 29, 2010#12
Originally Posted by Billiam ↑
Long exposure + "painting" with a flashlight = what you see in the pic.
I'm ginna try that sometime.
trx73Thread starterKingston, Ontario · Jun 6, 2010#13
I just got rims back and stamped on the back is "ET 38" is this the offset???
Bluevitz-rsOshawa, Ontario, Canada · Jun 6, 2010#14
Originally Posted by trx73 ↑
I just got rims back and stamped on the back is "ET 38" is this the offset???
Yes.
trx73Thread starterKingston, Ontario · Jun 6, 2010#15
If so 205 50 16 or 205 45 16 without dropping. I don't want too much space in the wheel well.
Bluevitz-rsOshawa, Ontario, Canada · Jun 6, 2010#16
What is you stock tire size?
trx73Thread starterKingston, Ontario · Jun 6, 2010#17
175 65 14
Bluevitz-rsOshawa, Ontario, Canada · Jun 6, 2010#18
Ok, then you'd want 205/45 16 to keep it as similar to stock as possible. I personally went with 205/40 16, but my transmission has a different speed sensor ratio in so it still reads the same as stock.

With 205/50 16 you'd loose some acceleration because of the larger rotation and your speedo would be reading slower. (good if you need to trade the car in at some point though LOL)
trx73Thread starterKingston, Ontario · Jun 6, 2010#19
Any chance of rubbing with 205 50 16??? I am worried that there will be too much space in the wheel well if I go 205 45 16
Bluevitz-rsOshawa, Ontario, Canada · Jun 6, 2010#20
You'd need a Yaris owner to confirm, but I don't think so with stock ride hight and a 38 offset.
trx73Thread starterKingston, Ontario · Jun 6, 2010#21
I am worried that there might be too much gap if I go 205 45 16. Do you think there would be rubbing if I went 50????