thebarberOriginal postGrand Rapids, MI · May 28, 2010#1got some auto depot headlights, but theres a sticker on the insides that says not to run them w/ HID's
anyone use the depot lights w/ HID's?
btw, these are the headlights in question....
Picture not included in this copy
Picture not included in this copy
Replies 42
severous01SE Texas · May 28, 2010#2hadnt done it but i know people with those brand lights on other vehicles. they'll melt with just halogens in there, right where the light hits the plastic
i suppose you should keep it clean since light will pass through clear and reflect and heat up on whatever is on the lens...melting the lens.
idk man, to me i'd run a hella 90mm projector in there opposed to that projector, and then you'll never have a problem cuz the hella's have vents for heat.
PETERPOOPOahu · May 28, 2010#3why oh why
falkor_99OC · May 29, 2010#4How hard is it to put the Hella 90mm in those lights?
I'm looking to get a pair maybe, but I'm just not sure yet?
severous01SE Texas · May 29, 2010#5dunno. i dont do that stuff
thebarberThread starterGrand Rapids, MI · May 30, 2010#6ran the h1 HID's for a good drive last night
no issues thus far
BilliamUSA · May 30, 2010#7I would guess that they say not to do it based on the non-HID reflectors in them. The light pattern would be "illegal".
The ArchitectFL · May 30, 2010#8Hid and depo auto lights work just fine together. I have had an 8000k 35w kit for almost a year.
thebarberThread starterGrand Rapids, MI · May 30, 2010#9halo's w/ led parking lights
Picture not included in this copy
picked up some yellow halogens for the high beams today
Picture not included in this copy
4300k H1's in the projectors
Picture not included in this copy
projectors w/ fogs
Picture not included in this copy
projectors-only against the side of my house...
Picture not included in this copy
marcustoronto, canada · May 30, 2010#10how was the fitting and how did you bypass the drl??
thebarberThread starterGrand Rapids, MI · May 31, 2010#11 Originally Posted by
marcus ↑ how was the fitting and how did you bypass the drl??
fit was ok, just at the top of the light it doesnt meet the fender as closely as OEM
i unplugged my drl module the first week i had the car...since i don't have factory foglights, it wasnt a problem.
marcustoronto, canada · May 31, 2010#12nice...hope you resealed it b4 installing..anyways ..yah wanted hid but cant take drl due to fogs..was told relay may not work either..arghhhh! i may need to do this capacitor thing..
thebarberThread starterGrand Rapids, MI · May 31, 2010#13 Originally Posted by
marcus ↑ nice...hope you resealed it b4 installing..anyways ..yah wanted hid but cant take drl due to fogs..was told relay may not work either..arghhhh! i may need to do this capacitor thing..
well, ive got the parts if you want to set them up that way....i did my mom's 03 malibu w/ a harness and capacitors this weekend
toy_torontoTarrana, Canada · May 31, 2010#14 Originally Posted by
thebarber ↑ halo's w/ led parking lights
Picture not included in this copy
That looks awesome.
.
falkor_99OC · Jun 1, 2010#15Yeah those pic make me wanna buy them. But has anyone tried the eBay ones vs. the depo lights from the website. Cuz the ones from the website are like 100 bucks more 😳
The ArchitectFL · Jun 1, 2010#16i really doubt there's any difference between the two. and for the record just so noone's mislead, the halos arent nearly that bright in person (unless im the only one). They're actually clear plastic rings lit up by two leds and you have to be right up there to see them.
You can make them brighter but its a hell of an amount of work.
The angel eyes are really nice though and when matched with an 8000k hid kit they match and look very nice.
falkor_99OC · Jun 1, 2010#17Yeah I didn't think there would be a difference. How hard is it to change out the LED's that light up the Halo's? On the back of the lights it looks like there is a bulb that you can change out for the Halo's.
thebarberThread starterGrand Rapids, MI · Jun 1, 2010#18the halo's are actually pretty dim in real life....i did the wiring for them in the daytime (hooked them up to the 3 LED's on each side) and had to shade each headlight to make sure they were working....
in real life the led's are about as bright as the halo's LOOK and the halos are about half as bright as the led's really are at night...
falkor_99OC · Jun 1, 2010#19Interesting....either way it looks bad ass. I'm just waiting a lil bit and then I'll get them =D But what type of bulbs are they. Cuz I just got some HID's (fogs and lows) H4 and H11's. It looked like you guys were saying they take H1's?
thebarberThread starterGrand Rapids, MI · Jun 2, 2010#20 Originally Posted by
falkor_99 ↑ Interesting....either way it looks bad ass. I'm just waiting a lil bit and then I'll get them =D But what type of bulbs are they. Cuz I just got some HID's (fogs and lows) H4 and H11's. It looked like you guys were saying they take H1's?
the wiring splits the h4 into seperate high and low beams which both become H1
uncleyarisToronto · Jun 2, 2010#21Look good Adam, hope they weather well in our climate!! That's always been my fear of them.
thebarberThread starterGrand Rapids, MI · Jun 2, 2010#22 Originally Posted by
uncleyaris ↑ Look good Adam, hope they weather well in our climate!! That's always been my fear of them.
i aim to find out!
thebarberThread starterGrand Rapids, MI · Jun 3, 2010#23Picture not included in this copy
Picture not included in this copy
toy_torontoTarrana, Canada · Jun 4, 2010#24They look 🎉!
.
thebarberThread starterGrand Rapids, MI · Jun 4, 2010#25 Originally Posted by
toy_toronto ↑ They look 🎉!
.
so many circles on the front right now
low beams, high beams, 3 led's each side, fog lights and my hella supertone thru the grill.....not to mention the netz badge is round-ish
toy_torontoTarrana, Canada · Jun 4, 2010#26Too many circles? It sounded like a complain. I'm happy to take them off your hands 😆
.
GrimlockGTHalifax, Nova Scotia · Jun 4, 2010#27I hope they make those lights to fit the '09+ models. I didn't realize there was a difference until after getting my car.
Looks sweet btw! 👍
ezhacker1San Francisco · Jun 4, 2010#28 Originally Posted by
GrimlockGT ↑ I hope they make those lights to fit the '09+ models. I didn't realize there was a difference until after getting my car.
Looks sweet btw! 👍
Indeed, i doubt there would be 09+s
Iggy888Etobicoke, ON Canada · Jun 7, 2010#29Those lights look sweet! I am looking forward to seeing them in person at the next Westend GTA meet.
bzinn 1University Place,WA · Jun 7, 2010#30Bad part to those lights as I have found out is the mounting tabs are fairly cheap,got 2 broken in just 4 months and gone through 3 sets of light bulbs.....thinking about going back to stock as I am tired of changing bulbs every 4-5 weeks.
Wowzers78Lewisville, TX · Jun 9, 2010#31I have these headlights as well and I've seen people use HID on them....you shouldn't have an issue. I thinks its a liability thing with them and in some jurisdictions they are illegal.
marcustoronto, canada · Jun 10, 2010#32hey barb..did you just relay the hids to run with them drl issue.
thebarberThread starterGrand Rapids, MI · Jun 10, 2010#33 Originally Posted by
marcus ↑ hey barb..did you just relay the hids to run with them drl issue.
i have my drl's unplugged
but my H4 kit has a harness with it, yes. so it could run on drl's (the aveo runs its HID's as DRL's). i also have/sell capacitors in case of flicker - - i had to use it on my mom's 03 malibu...which also uses the HID's as drl's and w/ auto lights
currently, my DRL module is unplugged and the H4's are split into 2 H1 bulbs for low and high. i disconnected my H4 HID wiring harness and just run the H1's directly off the oem wiring.....so now my high beam indicator works again, lol
marcustoronto, canada · Jun 10, 2010#34i found an extra relay harness fr my previous hids.. was thinkin to just using that.. didnt want to disconnect hid cause had someone did that and lost his fogs..
thebarberThread starterGrand Rapids, MI · Jun 10, 2010#35 Originally Posted by
marcus ↑ i found an extra relay harness fr my previous hids.. was thinkin to just using that.. didnt want to disconnect hid cause had someone did that and lost his fogs..
yes, i did that w/ crandall...he lost his fogs
marcustoronto, canada · Jun 10, 2010#36would the relay work vs capacitors
thebarberThread starterGrand Rapids, MI · Jun 10, 2010#37 Originally Posted by
marcus ↑ would the relay work vs capacitors
it depends on whether the output from the oem drl module is pulsed or not. i used both the harness and capacitor on my mothers malibu...
marcustoronto, canada · Jun 10, 2010#38yikes didnt know about that pulse thing.. i may have to open a thread for this..about to get hid this saturday..only reason im going hid is because i have to take the bumper anyways and put on my hella so might as well add hids right...lolz
if not i can always add capacitor..just let me know which one and where to tap it..
falkor_99OC · Jun 16, 2010#39Does anyone know the size of the projector? I heard some people talk about getting a 50mm size from a different website to do a retro-fit. So how big is this one? And how big are ones on like an Audi or something?
falkor_99OC · Jun 16, 2010#40bump! Anyone knows?
thebarberThread starterGrand Rapids, MI · Jun 16, 2010#41 Originally Posted by
falkor_99 ↑ bump! Anyone knows?
i don't know the size of projector, but the hid bulb went in well enough...
Red RaiderSanta Fe/Albuquerque, NM · Jan 19, 2012#42Just so i'm clear on things you used two h1's correct?
JumpmanYarisSO. INDIANA · Jan 19, 2012#43 Originally Posted by
Red Raider ↑ Just so i'm clear on things you used two h1's correct?
Originally Posted by
thebarber ↑ ran the h1 HID's for a good drive last night
no issues thus far
.