Yarisworld Archive

what is this?

13 posts · 8,742 views

barebonedvitzOriginal postsacramento,CA · May 23, 2010#1
sup y'all..

so... from this pic, what's this rod called and i'd like to change the bushings cause they're cracked... my car's 158,000miles and i'm not sure when they started cracking...

anyone changed these on their's yet?

i have tein basics installed as well.

thanx for helping in advance!

1 attachment not included in this copy

Replies 12

evo165*tIny dOts iN AsiA* · May 23, 2010#2
That is called "anti-roll bar linkage" or "Struct linkage to anti-roll bar"... Hope it help... 😉
RacerFreakXXXSomers NY · May 23, 2010#3
https://www.toyotapartscenter.net/20...cessories.html

1) FRONT HUB
2) FRONT WHEEL BEARING
3) STRUT
4) COIL SPRING
5) STRUT BUMPER
6) SPRING INSULATOR
7) SPRING SEAT
8) STRUT MOUNT
9) KNUCKLE
10) LOWER CONTROL ARM
11) STABILIZER BAR
12) BUSHINGS
13) BRACKET
14) LINK

Picture not included in this copy

stabilizer bar link
thebarberGrand Rapids, MI · May 23, 2010#4
sway bar end link
127.0.0.1NE · May 24, 2010#5
Originally Posted by thebarber ↑
sway bar end link
yes

this is what it is called
barebonedvitzThread startersacramento,CA · May 24, 2010#6
sweet! thanks
severous01SE Texas · May 25, 2010#7
if you lower your ride you need a shorter one.
BLAZINBLUEVITZNEW YORK · May 25, 2010#8
Originally Posted by severous01 ↑
if you lower your ride you need a shorter one.
SINCE WHEN..........😆
CTScottUSA, CT · May 25, 2010#9
^+1

I had to make a longer one for my lift kit for Crashy, but that was only because I lifted it by adding a bracket to move the strut mount 4" higher.
127.0.0.1NE · May 25, 2010#10
Originally Posted by severous01 ↑
if you lower your ride you need a shorter one.
only if you get shorter struts.

most lowerings do not affect
the parts the sway bar end link attaches to,

hence...NO
127.0.0.1NE · May 25, 2010#11
Originally Posted by CTScott ↑
^+1

I had to make a longer one for my lift kit for Crashy, but that was only because I lifted it by adding a bracket to move the strut mount 4" higher.

u still haz a swaybar ? shouldn't crashy's plow prevent excessive body roll ? lulz
BLAZINBLUEVITZNEW YORK · May 25, 2010#12
Originally Posted by 127.0.0.1 ↑
only if you get shorter struts.
ANOTHER since when.......👍
severous01SE Texas · May 28, 2010#13
Originally Posted by 127.0.0.1 ↑
only if you get shorter struts.

most lowerings do not affect
the parts the sway bar end link attaches to,

hence...NO
you lowered the body of the car...so you lowered the points at which the bar is mounted to the body...the bar is supposed to be flat. move any part of it and it wont work as designed...true you didnt lower the mount on the struts, but you lowered the parts where the bushings are mounted under the car.

actually, you'd need longer ones.

if you modify one thing you gotta adjust everything involved...just like you're supposed to adjust camber if you lower...suppose you didnt. good luck keeping tires on it. you will also need a toe adjust...and probably caster will be out as well. not so much in the rear as the front.

i really dont care if you 'fix' it or not. if you like the way it handles, good. keep it that way