Yarisworld Archive

Lesson Learned :/

15 posts · 4,977 views

YAR1SOriginal postRaleigh, NC · May 18, 2010#1
I've known for some time that my tails have been leaking in rainwater and even during car washes.... I've been leaving it and leaving it saying "I'll let it dry out so I can seal it back up..." well They've been dry for some time now and I had more than a few chances to do it, but yesterday night a giant summer t-storm came through and poured down inches upon inches of heavy rain....

I woke up and this is what I found after being dry for some time.









Luckily enough when I beat on the corner which has the water, the water seeps out of the seal and drips out.....






so I belive I will be letting them dry out AGAIN .... and sealing them soon! 🙄 😆🙄
lesson learned....

Replies 14

AstromanWenatchee, WA · May 18, 2010#2
Those replicas?
BrianRiverside, CA · May 18, 2010#3
Why wait for them to dry? You should open them up, clean off the inside of the lens, and replace the sealant. That way all of the water is removed and you can get rid of water spots inside.
cali yarisCanoga Park, CA · May 18, 2010#4
^ yes they are
AstromanWenatchee, WA · May 18, 2010#5
Why I will never go with replica headlights or tails. No problems with my used TYC tails from ebay so far.

But I agree, get those suckers off dry or not, clean, and reseal!
devinlamotheSudbury, Canada · May 18, 2010#6
It's funny because my tails are now getting water in them as well (same side). Even after sealing ... I think next time I will go OEM.

Unless I just don't know how to seal lol
Iggy888Etobicoke, ON Canada · May 18, 2010#7
Those last two pictures look like your Yaris is crying.
YAR1SThread starterRaleigh, NC · May 18, 2010#8
lol yeah, im just afriad to bake them.... it seems harder than it probably is.... also that right light (as some of you may know) has short lengths of wiring to work with, since I may have to cut the wires, I dont want to mess with trying to disconnect them and rewire as well as trying to bake them..... eh maybe one day ..... :)til then I will just dry them out and reseal and deal with small water spots.



and I have nothing against these replicas except the leaking problems..... otherwise they have been good to me :)
yarisitisCalifornia · May 18, 2010#9
Is this a common issue with the Yaris?

What conditions deteriorate the sealant on the headlights?
YAR1SThread starterRaleigh, NC · May 18, 2010#10
Originally Posted by yarisitis ↑
Is this a common issue with the Yaris?

What conditions deteriorate the sealant on the headlights?
It's not a problem with original tail lights.... simply just a problem with replica RS tail lights which are aftermarket tail lights.
YAR1SThread starterRaleigh, NC · May 18, 2010#11
I loved my brother's response to a fix for the problem, he said ....

Cant you just put a goldfish in there and make it a new trend?

LOL!
yarisitisCalifornia · May 18, 2010#12
Originally Posted by YAR1S ↑
It's not a problem with original tail lights.... simply just a problem with replica RS tail lights which are aftermarket tail lights.
Ahh, gotchya. I should've read the whole thread, lol.



Originally Posted by YAR1S ↑
I loved my brother's response to a fix for the problem, he said ....

Cant you just put a goldfish in there and make it a new trend?

LOL!
That would actually be pretty damn awesome, except when the fish dies.



MadMaxSan Antonio, Texas! · May 19, 2010#13
Originally Posted by Astroman ↑
Why I will never go with replica headlights or tails. No problems with my used TYC tails from ebay so far.
Or the TYCs I bought new! They're great tails, and not that expensive. Sparks has them for $99 (p/n PTS25-52061)! 👍
RainSoCal · May 19, 2010#14
Originally Posted by YAR1S ↑
I loved my brother's response to a fix for the problem, he said ....

Cant you just put a goldfish in there and make it a new trend?

LOL!
o_O that's something to consider 😆
VangCA · May 19, 2010#15
is the brake light hot enough to boil him up lol