So we made a roll bar per the NASA rules for TT. turned out pretty nice 😁
2 attachments not included in this copy
10 posts · 6,597 views
2 attachments not included in this copy
I agree. I also would not like having that tube right behind my head/seat. Proper aligning of the harness, if one is going to be used, could also be a challenge with the down tube being behind the seat.Originally Posted by Bluevitz-rs ↑If you guys did all the bending yourself, you should have built it a lot wider and higher. There's too much crush area between the body and the cage to be as effective as a roll bar should be.
In the event of a side impact, the car would crush into the seat before it hits the bar. Same applies in a roll over.
i think that becomes an additional points penalty for doing so...Originally Posted by cali yaris ↑Those are teaser pics --- details!!! 🙂
also, is it not attached to the B pillars?
we didnt weight it before and after, no scales.Originally Posted by nemesisz ↑Nice roll bar.
Did you scale your car for before and after weight? I am just curious about the weight. Also can you tell us about the specs for the materials (tube diameter and type)?
Do you have any additional pictures like the mounting plates and weld quality?
One final question, is the diagonal bar on the main hoop one piece? Can’t tell because of the lighting in the picture.
Sorry of the 20 questions but I have been researching roll bars and cages for a few weeks now.