Yarisworld Archive

megan header hardware

8 posts · 6,290 views

06yaris06Original postToronto · May 5, 2010#1
hey everyone,

I just picked up a used megan header and it came with the gasket (in good condition) but no other hardware. I was just wondering if anyone can tell me what i will need and the sizes?...i think i need 3 studs for the part that connects to the mid-pipe (size unknown?)..as well as a donut gasket for that same section? and lastly i think i need 5 bolts that connect the header to the engine because the stock ones will be too short? (again the size of those i also dont know?).

so if anyone can tell me what exactly it is that i will need and their sizes for the install it would be much appreciated. If i am way off please dont hesitate to tell me and point me in the right direction lol!. Thank you very much in advance for any input! 🙇

Replies 7

aucoriumSouth Africa · May 5, 2010#2
hey buddy

the megan header is suppose to be bolt on , i know there is suppose to be a few goodies in the box , just run a search on the forum , there are quite a few posts on this topic , hope it helps :-)
Bluevitz-rsOshawa, Ontario, Canada · May 5, 2010#3
If you're careful you can get the old donut off the stock exhaust. And you should be able to use all the existing hardware that already holding the manifold on.
thebarberGrand Rapids, MI · May 5, 2010#4
i just swapped the header in my 07 last month

since you own an 06, your's will likley be like mine and half destroyed

i reused all the oem bolts/nuts to install the header, so all you need is the donut gasket and the gasket at the block (which it sounds like you already have)

good luck!
06yaris06Thread starterToronto · May 5, 2010#5
sweet sounds good..thanks alot guys its very much appreciated! i will probably be doing it either thursday or friday ill keep you guys posted ..and barber also thank you for the rim refinishing tips a while back it went very well and they looked great :D
WeeYariGeorgetown, Ontario, Canada · May 5, 2010#6
Originally Posted by 06yaris06 ↑
it went very well and they looked great :D
Post up pics!
06yaris06Thread starterToronto · May 5, 2010#7
i wouldve and shouldve but i refinished them so i could sell them lol and they sold right away...they were 17's and just too heavy for me. killlled my mileage :( lol...
thebarberGrand Rapids, MI · May 5, 2010#8
glad i can/could help