BrianOriginal postRiverside, CA · Apr 26, 2010#1Got my parts in today for my retrofit. I'm gonna put these in the Vios headlights I have.
Everything
Picture not included in this copy
Lexus RX projectors
Picture not included in this copy
Picture not included in this copy
TSX clear lens
Picture not included in this copy
Morimoto 5000k D2S bulbs
Picture not included in this copy
Picture not included in this copy
Gatling gun shrouds
Picture not included in this copy
Denso ballasts
Picture not included in this copy
Picture not included in this copy
H4 wiring harness
Picture not included in this copy
I'm gonna start this on saturday.
Replies 39
tk-421Dagobah · Apr 26, 2010#2Looking good! How much $$$ spent so far?
Are you doing this mod on your OEM headlamp assy?
BrianThread starterRiverside, CA · Apr 26, 2010#3 Originally Posted by
tk-421 ↑ Looking good! How much $$$ spent so far?
Are you doing this mod on your OEM headlamp assy?
About $500 for everything to do a complete retrofit. I'm gonna be using a set of Vios headlights for my retrofit.
LEGATO``Virginia Beach · Apr 26, 2010#4Brian, simply put you have the best goodies EVER. haha
Any chance of you selling your old pair of headlights (with MI retrofits too) or are you keeping those just in case?
BrianThread starterRiverside, CA · Apr 26, 2010#5 Originally Posted by
LEGATO`` ↑ Brian, simply put you have the best goodies EVER. haha
Any chance of you selling your old pair of headlights (with MI retrofits too) or are you keeping those just in case?
I'm keeping my old one's as a back up pair
minired5stbySan Diego · Apr 26, 2010#6Do you have pics of the Vios headlights, is there that much of a difference compared to your stock ones?
BrianThread starterRiverside, CA · Apr 26, 2010#7 Originally Posted by
minired5stby ↑ Do you have pics of the Vios headlights, is there that much of a difference compared to your stock ones?
The only real difference is the clear reflector.
Picture not included in this copy Picture not included in this copy Picture not included in this copy minired5stbySan Diego · Apr 26, 2010#8Cant wait to see it all come together
Kaotic LazagnaCentral Valley, CA · Apr 27, 2010#9Sweet!
AlainMikliSF, CA · Apr 27, 2010#10🤘🤘🤘nice
PETERPOOPOahu · Apr 27, 2010#11i want
RHDVIPbBLouisville, KY · Apr 28, 2010#12 Originally Posted by
PETERPOOP ↑ i want
Me too
marlondogLost Angeles · Apr 30, 2010#13God Damn Brian! What are you trying to do? Turn your lights into "proton" beams? Your gonna send some mugs to the Braille Institute wif dem right there. Enjoy!
yaris-meAnaheim, CA · May 1, 2010#14Stupid question, but, do you have enough room? Looks tight.😕
In any case, it should look nice.👍
BrianThread starterRiverside, CA · May 1, 2010#15 Originally Posted by
yaris-me ↑ Stupid question, but, do you have enough room? Looks tight.😕
In any case, it should look nice.👍
Yes, there is enough room. These are one of the smallest projectors. I wanted the S2K projectors but they won't be out for another month or two. I'll probably have to trim the shrouds because they're so big but atleast I'll know they'll cover the projector.
BrianThread starterRiverside, CA · May 1, 2010#16Here is my progress so far. Lens removed, sealant removed, bowl removed and modified. Projector fits nicely to the rear of the bowl. I had to trim 1/4" from the shroud to clear part of the bowl. Here are some pics of my progress.
Modified reflector bowl
Picture not included in this copy
Picture not included in this copy
Projector inside the reflector bowl
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
At this point, the factory adjustment knobs will still be functional. Not sure if they will be once everything is together.
fnkngrvIn The Hotbox · May 1, 2010#17lookin good
BrianThread starterRiverside, CA · May 1, 2010#18Bowl modification complete.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
yaris-meAnaheim, CA · May 2, 2010#19Looking good. Are you going to paint the old reflector?
BrianThread starterRiverside, CA · May 2, 2010#20 Originally Posted by
yaris-me ↑ Looking good. Are you going to paint the old reflector?
I'm painting the housing satin black but I'm gonna leave the shroud as is.
BrianThread starterRiverside, CA · May 2, 2010#21I had a minor set back. One of the Audi style strips was amber instead of white so I have to get a new one. Projectors are mounted inside the bowls. Just waiting on the sealant to dry. Here are some pics of of what I did today.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
derickveliz2Central, MA · May 3, 2010#22Wow! looks nice (o:
PETERPOOPOahu · May 3, 2010#23wow.....
me next, me next.
yaris-meAnaheim, CA · May 5, 2010#24👍I don't think people realize how much work you put into your car. Good job.👏
BrianThread starterRiverside, CA · May 8, 2010#25Here are the completed pics. I don't have pics of the cut-off. The right side is slightly lower than the left which is the opposite of what it's supposed to be. The left side has a light angle to it. None of this really matters though because it still lights up the entire width of four highway lanes. I am very happy with the output. The with l.e.d.s are gonna be replaced with some red ones I got in the mail today for a demon eye effect. I am gonna wire them to a switch to turn them on/off. Right now the white l.e.d.s are wired to come on with the parking lights. I also used the Nissan OEM sealant for the headlights.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Lucas13Fort Lauderdale · May 9, 2010#26🎉Sweet! Very nice result!!!
rye7jenSaudi Arabia · May 9, 2010#27Awesome! Do you have the whole body shot? 👏
BrianThread starterRiverside, CA · May 9, 2010#28 Originally Posted by
rye7jen ↑ Awesome! Do you have the whole body shot? 👏
Picture not included in this copy wholenizzOREGON · May 20, 2010#29dude thats a whole lotta work. mad props to ya. can't wait to save up enough to do this myself. real HID's ftw. ebay just a litttle better than stock =P
ViolinNew Jersey · May 24, 2010#30First rate job. Looks really great. But let's see the money shot.
Here's mine (same projectors and clear lenses):
Picture not included in this copy
redglare45Pomona / Pasadena, California · May 24, 2010#31Freakin awesome Brian.🤘 Do you happen to have a shot of how the projectors are held up from the back of the bowl?
BrianThread starterRiverside, CA · May 24, 2010#32 Originally Posted by
redglare45 ↑ Freakin awesome Brian.🤘 Do you happen to have a shot of how the projectors are held up from the back of the bowl?
Sorry, no pics. They are held in by a couple of screws from the projector to the bowl and then some windshield adhesive to fill in the gaps. I have a better way to mount them when I do my next retrofit in a month or two.
BrianThread starterRiverside, CA · May 24, 2010#33 Originally Posted by
Violin ↑ First rate job. Looks really great. But let's see the money shot.
Here's mine (same projectors and clear lenses):
Picture not included in this copy
My cut off isn't as good as your. My car was in the body shop when I was doing the retrofit so I couldn't aim the properly. The cut off is a little low and the drivers side has a slight angle. There is still more than enough light hitting the road though. Once I do my next retrofit these lights are coming out so I can work on them some more. I was in a hurry to finish them.
PETERPOOPOahu · May 24, 2010#34Going to be selling the ones you just made?
BrianThread starterRiverside, CA · May 24, 2010#35 Originally Posted by
PETERPOOP ↑ Going to be selling the ones you just made?
Maybe. I haven't decided yet.
redglare45Pomona / Pasadena, California · May 24, 2010#36 Originally Posted by
Brian ↑ Sorry, no pics. They are held in by a couple of screws from the projector to the bowl and then some windshield adhesive to fill in the gaps. I have a better way to mount them when I do my next retrofit in a month or two.
Ok cool. Keep up the good work man. I guess more to come in a couple months. Can't wait to see the progress.
BrianThread starterRiverside, CA · May 24, 2010#37 Originally Posted by
redglare45 ↑ Ok cool. Keep up the good work man. I guess more to come in a couple months. Can't wait to see the progress.
Next will be S2K projectors with clear lens' and demon eyes. Should be available next month.
redglare45Pomona / Pasadena, California · May 24, 2010#38Sweet!
fnkngrvIn The Hotbox · May 30, 2010#39 Originally Posted by
Brian ↑ About $500 for everything to do a complete retrofit. I'm gonna be using a set of Vios headlights for my retrofit.
Brian,
So does the 500 you spent also cover the Vios HL's also? Might sound like a dumb question, but another person might not have included that in their calculations, you know what I mean?
BrianThread starterRiverside, CA · May 30, 2010#40 Originally Posted by
fnkngrv ↑ Brian,
So does the 500 you spent also cover the Vios HL's also? Might sound like a dumb question, but another person might not have included that in their calculations, you know what I mean?
Vios headlights were about $180 shipped for the pair and about $400 for the retrofit parts.