I am paying regular price which is 400 I believe however once I confirm that all is good with the fitment then we can proceed with the GB and the people involved in that will receive a discount depending on how many join.
Yaris S Sedan Clazzio GB Feeler
80 posts · 27,957 views · page 2 of 2
Replies continued
Alright
Yes i would be interested. I have the base sedan with power package so my seats look just like the even numbered pics on the other page. the ones that garm sells on his site are said to fit which model/package?
Alright guys and gals...Garm has received my seat covers and snapped a few pics before shipping them out either today or tomorrow. I will show them below. I have my fingers seriously crossed and am impressed with what I see so far:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
mmm...pron!
Hurry Mr. UPS/Fedex/USPS rain or shine guy!
Hurry Mr. UPS/Fedex/USPS rain or shine guy!
you aren't lying...I am losing sleep over the excitement!Originally Posted by rningonfumes ↑mmm...pron!
Hurry Mr. UPS/Fedex/USPS rain or shine guy!
Sweet lets wait and see
Wonder if they have BLK with RED
Wonder if they have BLK with RED
They will do what you order. You contact Garm and he gets the order set up. If it is a custom combo then it takes a couple months for them to get stateside.
I will check back into this thread once I have the covers installed along with pics. Other than that I will not be posting up. I do not want to screw those people out of information that need it from this thread. Thanks.
yo Why you let em get to you so easy ? I guess ill be seen u in MI
Originally Posted by JumpmanYaris ↑yo Why you let em get to you so easy ? I guess ill be seen u in MI
TK-421 twisted my arm really hard so I guess I will stay around for a bit longer. 😁
I am still targeted to receive on the 4th, but UPS hasn't updated my tracker since the 29th so I have no clue where they are :(
CHELMSFORD, MA, US 08/03/2010 8:21 P.M. DEPARTURE SCAN
Looks like they just might make it to me tomorrow on target!
Looks like they just might make it to me tomorrow on target!
!!!
😢 😢 😢 😢
Well, today was to be a day of joy and exultation however alas it is not...i received my Clazzio box. I was like a kid in a candy store. I opened the box with great care and carefully lifted out the instruction booklet placing it on a table face down as I was so excited to see the covers. I looked them over and they looked spectacular, however when I picked up the book to read through it I noticed the cover stated for the Liftback! I planned on installing them this afternoon off and on while dodging my job. I read through the book and found the distinction of how the headrests for the LB actually sit down into the upper seat which is not the case with the sedan. I was really hoping that they just sent the wrong book with the right covers however much to my chagrin that was not the case. I contacted Garm right away and he contacted me back within minutes so we are going to work to resolve the issue. Clazzio made the error, not Garm. I am glad that we have a supporting vendor that is so quick to respond and work toward a resolution when something goes awry.
I would wager that it would be another few months for me to receive my covers at this point.
Well, today was to be a day of joy and exultation however alas it is not...i received my Clazzio box. I was like a kid in a candy store. I opened the box with great care and carefully lifted out the instruction booklet placing it on a table face down as I was so excited to see the covers. I looked them over and they looked spectacular, however when I picked up the book to read through it I noticed the cover stated for the Liftback! I planned on installing them this afternoon off and on while dodging my job. I read through the book and found the distinction of how the headrests for the LB actually sit down into the upper seat which is not the case with the sedan. I was really hoping that they just sent the wrong book with the right covers however much to my chagrin that was not the case. I contacted Garm right away and he contacted me back within minutes so we are going to work to resolve the issue. Clazzio made the error, not Garm. I am glad that we have a supporting vendor that is so quick to respond and work toward a resolution when something goes awry.
I would wager that it would be another few months for me to receive my covers at this point.
I feel your pain...
.
🙁🙁🙁🙁
.
Noooooooooo
Dammmnit! Fnkngrv, thanks for all your efforts!
Garm is reordering ASAP. On a side note he may be trying to sell the ones that had been shipped to me to someone for their LB. They are really sharp.
Well so far no word yet on when the next shipment will arrive. I am hoping that it will be soon. I picked up my heated seat kits as well and I need to have them installed between the factory seats and the covers.
Who install these is it ur self or u have to take it to a shop?
I never done any but some cheap ones to keep the seats clean
I never done any but some cheap ones to keep the seats clean
Originally Posted by JumpmanYaris ↑Who install these is it ur self or u have to take it to a shop?
I never done any but some cheap ones to keep the seats clean
There have been plenty of people that have done it themselves. I will be taking care of the work myself, especially since I will be installing my heated seat kits. I suppose that you could take them to a shop and depending the shop would be the cost. I spoke with the local shop when I got the LB covers by mistake and after looking at them the guy said 200 bucks....no justification....just 200 bucks.
While at MI yesterday I got to see a set and saw the instructions. The instructions looked very thorough. Seems some patience, time, and finger/arm dexterity would be needed. Definitely a DIY job.
Well after much frustration, sweat, and tears my covers arrived. They are finally installed and for clarification they fit the S Sedans just fine! Thanks go to JBougie (Jinni Lynn) for her assistance with a lot of the job. Total time for install was around 10 hours. This was due to being sidetracked several times as well as making a few mistakes along the way. I took before photos along with a couple photos of the tools used to include beer.
The front seats pretty much went without a hitch after we decided to pull the seats out of the car. I did make a mistake and used a 10mm 6 point socket to remove the seat bolts rather than a Torx socket however we did run to AutoZone and picked up a 4 piece Torx set to put them back in. You pretty much are going to strip the bolts if you use a regular socket so BEWARE! Other than that on the passenger side the removal of the Airbag Circuit Board was a PITA. We ended up unscrewing it from the housing and removing that way.
The rear seats were the real challenge. Jinni and I tried 50 different ways from Sunday to pull the bench, but ultimately after much sweat and cussing we called it quits. I stopped by a local upholstery shop and the guy popped the bench in under 10 seconds much to my chagrin. I would actually recommend doing the same if you have the opportunity to do so because it is easy to ruin the bench cushion. That stupid piece of foam will set you back 500 bucks if you have to replace it. Another item of note is that I did have to make a small incision at the slit point for the c bracket that secures the seat in the upright position for the passenger side of the rear seat. No matter how I manipulated the cover I could not get the hole to line up correctly from top to bottom. The slit was also not wide enough for the bracket. I make the incision with an exacto knife and then used 3m tape to tape the flap I created inside the cover. Really even with the seat down you can't notice, but I still had to do it. The whole for the pull knob on the driver's side rear seat section seemed to be too small so it took me almost 10 minutes to get it to seat correctly just by itself. Other than that the only thing that I could really comment on would be fitment on the main cover for the passenger side rear seat back around the pivot bar for the arm rest could have been better.
All in All I give the whole experience a 4 out of 5. The covers are magnificent however the actual install process is a bit stressful. If you have the money and the inclination I would have a shop install them to be liable if there is any tearing around the different mounting holes because if you have little patience then you will most likely tear them as others have noted. Thanks Garm for working so hard to ensure that I had the right product in the end!
Last item is that I also did the initial install of my heated seat kits. They are ready to be wired in once I get my climate control bezel back from being CF wrapped by Brian.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
The front seats pretty much went without a hitch after we decided to pull the seats out of the car. I did make a mistake and used a 10mm 6 point socket to remove the seat bolts rather than a Torx socket however we did run to AutoZone and picked up a 4 piece Torx set to put them back in. You pretty much are going to strip the bolts if you use a regular socket so BEWARE! Other than that on the passenger side the removal of the Airbag Circuit Board was a PITA. We ended up unscrewing it from the housing and removing that way.
The rear seats were the real challenge. Jinni and I tried 50 different ways from Sunday to pull the bench, but ultimately after much sweat and cussing we called it quits. I stopped by a local upholstery shop and the guy popped the bench in under 10 seconds much to my chagrin. I would actually recommend doing the same if you have the opportunity to do so because it is easy to ruin the bench cushion. That stupid piece of foam will set you back 500 bucks if you have to replace it. Another item of note is that I did have to make a small incision at the slit point for the c bracket that secures the seat in the upright position for the passenger side of the rear seat. No matter how I manipulated the cover I could not get the hole to line up correctly from top to bottom. The slit was also not wide enough for the bracket. I make the incision with an exacto knife and then used 3m tape to tape the flap I created inside the cover. Really even with the seat down you can't notice, but I still had to do it. The whole for the pull knob on the driver's side rear seat section seemed to be too small so it took me almost 10 minutes to get it to seat correctly just by itself. Other than that the only thing that I could really comment on would be fitment on the main cover for the passenger side rear seat back around the pivot bar for the arm rest could have been better.
All in All I give the whole experience a 4 out of 5. The covers are magnificent however the actual install process is a bit stressful. If you have the money and the inclination I would have a shop install them to be liable if there is any tearing around the different mounting holes because if you have little patience then you will most likely tear them as others have noted. Thanks Garm for working so hard to ensure that I had the right product in the end!
Last item is that I also did the initial install of my heated seat kits. They are ready to be wired in once I get my climate control bezel back from being CF wrapped by Brian.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Here is my editorial contribution to the thread ... he had to test them out before they went back in the car, of course 😛
1 attachment not included in this copy
this is a little off topic..Originally Posted by fnkngrv ↑Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
hey fnkngrv, where did you get your mats? or are they DIY? they're looking really good :)
PLUS your new seat covers are amazing! 🙂
!
i want some... def will have to wait til beginning of 2011 though
Originally Posted by Flipper_1938 ↑This is the interior that my car has. Do they make leather seat covers for this style?
I don't believe that they are made for the deeper seats, but not 100%. When I bought mine I took a 400 dollar risk and it paid off luckily since we were all worried that they would not work for the S model Sedan. They do and nicely.
Where did you get the Clazzio covers?