SwikityOriginal postEdmonton · Apr 22, 2010#1Is there a guide out there for removing the rear taillights for the sedan.
I searched and found a guide for the LB, but I can't find one for the sedan.
I'm wanting to smoke them, but I'm going to have to remove them in order to do that xD
Replies 9
blh4645Georgetown KY · Apr 22, 2010#2👍
Here you go, hope this is what you are looking for.
BrianRiverside, CA · Apr 22, 2010#3They stick a little bit the first time. Just wiggle them a little bit while pulling out after removing the two 10mm nuts.
SwikityThread starterEdmonton · Apr 23, 2010#4Awesome, thanks guys.
Yaris HiltonBristol, Tennessee, USA · Apr 23, 2010#5 Originally Posted by
Swikity ↑ I'm wanting to smoke them, but I'm going to have to remove them in order to do that xD
It's hard to keep them lit.
.Kevin.Prince George, BC. Canada · May 8, 2011#6Will this for for a 2010?
big loLoiza,Puerto Rico · May 8, 2011#7^its the same Kevin, but its not just the two 10mm nuts that you have to remove there's two plastic studs that hold her in place, with a noise pliers and twist them so the tails come out with ease.
.Kevin.Prince George, BC. Canada · May 8, 2011#8Ok will try today hopiing not to fuck my car up
JumpmanYarisSO. INDIANA · May 8, 2011#9There is no way to fuck up man
.Kevin.Prince George, BC. Canada · May 8, 2011#10fucked up.
Removed the pin closer to the trunk with three tripods no idea how to put it back in it isn't like the others that just push in.
I also opened it and managed to get the two steel nuts unscrewed the light was then severely loosened, I also took off the one bulb then I couldnt figure out/manage to push out that one god damn white pin at the top area, or do I pull it out? I placed everything back out of fear lol
edit: What two studs? I unscrewed to little nuts and thats it