StoveOriginal postTigard Oregon · Apr 16, 2010#1I tried my old Miata wheels out tonight. The tires are correct for a Miata (195/50's) but they sure look tiny on a Yaris.
I definitely need to drop it an inch or two and get some 205/55's. For tires, I'm leaning towards the Dunlop Direzza DZ101.
15X6, 40 offset, 13.1 pounds.
(and yes, the rears are completely bald. That Miata sure was a fun car.)
3 attachments not included in this copy
Replies 14
JeemeeCentral Arkansas · Apr 17, 2010#2They look pretty sharp. TireRack has a deal going on with the dz101. I think it's $50 rebate with a purchase of 4.
kimonaHuntington Bch, CA · Apr 17, 2010#3With some new rubber, you'll be looking very good!
BilliamUSA · Apr 17, 2010#4A 205/55 should look nice and meaty. 👍
Are you going to try to do something about the centers?
StoveThread starterTigard Oregon · Apr 17, 2010#5 Originally Posted by
Billiam ↑ A 205/55 should look nice and meaty. 👍
Are you going to try to do something about the centers?
I'd like to replace/change the center caps but I dont have a clue where to look to get different ones or what I can do to the existing centers to remove the Mazda logo. They are plastic with the logo molded on the surface so popping the logo off is out.
BilliamUSA · Apr 17, 2010#6 Originally Posted by
Stove ↑ I'd like to replace/change the center caps but I dont have a clue where to look to get different ones or what I can do to the existing centers to remove the Mazda logo....
Maybe you could sand the actual Mazda emblem off and repaint the center cap.
StoveThread starterTigard Oregon · Apr 17, 2010#7 Originally Posted by
Billiam ↑ Maybe you could sand the actual Mazda emblem off and repaint the center cap.
I think I found a much easier solution...
Wheels and tires. And its only about a 1.5 hours away.👍
kimonaHuntington Bch, CA · Apr 18, 2010#8 Originally Posted by
Stove ↑ I think I found a much easier solution...
Wheels and tires. And its only about a 1.5 hours away.👍
Good luck with the offset on those wheels!
thebarberGrand Rapids, MI · Apr 18, 2010#9im sanding down my centercaps and repainting them....
Picture not included in this copy
7:34pmBritish Columbia · Jun 18, 2013#10Sorry I know this thread is old.
Just got these miata wheels and I'm trying to figure out if they're acorn/60 degrees style lug or mag seat/flat. The mounting surface looks fairly flat but everything I've search comes up as 60 degree/acorn style.
Originally Posted by
Stove ↑ I tried my old Miata wheels out tonight. The tires are correct for a Miata (195/50's) but they sure look tiny on a Yaris.
I definitely need to drop it an inch or two and get some 205/55's. For tires, I'm leaning towards the Dunlop Direzza DZ101.
Picture not included in this copy
15X6, 40 offset, 13.1 pounds.
(and yes, the rears are completely bald. That Miata sure was a fun car.)
YaristeveLos Angeles · Jun 18, 2013#11 Originally Posted by
7:34pm ↑ Sorry I know this thread is old.
Just got these miata wheels and I'm trying to figure out if they're acorn/60 degrees style lug or mag seat/flat. The mounting surface looks fairly flat but everything I've search comes up as 60 degree/acorn style.
They're acorns.
I have a Miata, I have these wheels (polished version).
7:34pmBritish Columbia · Jun 18, 2013#12^^Thanks so much!
Now the question. To paint black, or not to paint...
Picture not included in this copy
Flipper_1938Kentucky · Jun 19, 2013#13I like silver better.
TLyttleKeremeos BC · Jun 20, 2013#14Me, too... (just like my opinion counts for squat!!)
ShinareOklahoma City, OK · Jun 20, 2013#15I like black. (but I painted my wheels black on my old yaris) heh