Dredging up this old thing again, I'm curious about why the Toyota B Puller set is required. Is that something that could be rented from an auto parts store? $1500 for the actual thing is a bit steep for a DIY project.
5 Spd to 6 Spd Conversion DIY
99 posts · 150,229 views · page 2 of 2
Replies continued
^ good timing, I'm starting on this next week.
I scored that used xB transmission from scioncrew. It's arriving Monday. Looks like at least one more trip to Harborfreight is in order.
I borrowed the puller set from my local dealer because I had the option to. The puller is specifically designed for disassembling the transmission. Only thing I needed to fab up was a trio of studs. I'll take a picture. You can use any pullers you'd like, just make sure they're not going to chip the teeth on the gears.
These are the studs I had to fab up. The ones I had weren't long enough so I had to weld a bolt onto each.
1 attachment not included in this copy
Wouldn't it have been easier to just get some threaded rod and cut it to length?
not really when your transmission is sitting on a bench in pieces. LOL
edit: it took me a whole of 5 minutes to flip the welder on and then grind and wire wheel them, so...
edit: it took me a whole of 5 minutes to flip the welder on and then grind and wire wheel them, so...
I chipped the teeth on one of the gears on my old box trying to remove it. There is bugger all room under the gear to get the legs of the puller in there.Originally Posted by Bluevitz-rs ↑I borrowed the puller set from my local dealer because I had the option to. The puller is specifically designed for disassembling the transmission. Only thing I needed to fab up was a trio of studs. I'll take a picture. You can use any pullers you'd like, just make sure they're not going to chip the teeth on the gears.
A bit of creative grinding on a puller might let you get under there easier without damaging the teeth.
PS, zip ties don't work
Picture not included in this copy
^I remember that pic... 👏
lol
lol
I didn't take pics of my C56 when I was tearing it down, but the 5th gear hub can be removed with a standard "bolt puller" or steering wheel puller set. The two holes in the hub should have M8x1.25 threads. Once you get the hub off, you can get a bearing separator on the upper groove of the 5th driven gear. Once that comes off, the 5th gear just slides off (it's on roller bearings). I'll try to remember to get one of the kids to take a pic of the C59 teardown.
So I was looking at the frame today when I changed my oil, and it looks like it's already notched the way bluevitz-RS did with his. I can't tell from the pictures, but it looks like the Vitz frame is/was square first, based on the shape of the cut off piece. Perhaps there really is hope for the NCP91 frame and a C60?
Just measure the gap between the stock tranny and the frame. That'll let you know if it'll fit or not. I added about 1" of room. When I first put the 6 speed on the motor and tried to get it up into position, it JUST hit the frame by about 1/4 inch or less.
So it was originally notched, but you added more room? I would have taken a pic, but I didn't have a camera on me.
No it was square.
Hmm, Now if I could just get my hands on the end cap for a C60...
I think that all it's fine because an TS can have 1.8L with an other tranny!
Than the engine bay is larger than echo for this engine! I wait your reply.
Than the engine bay is larger than echo for this engine! I wait your reply.
The Euro T-sport 6-speed uses the EC6X series transmission with the 1.8L 2ZR-FE engine, which is a two piece casing instead of the C-series three piece design. I would guess that the gears are also narrower than the C5X/C6X series, but I'd have to have them side-by-side to verify. The gear shift cable is also unique to the Euro T-Sport, as are the mounting brackets that mate with the body (the engine/transmission side of the mounts are the same as the xD).
Avensis 6-speed gearbox (Euro):
Picture not included in this copy
Corolla 5-speed gearbox (US):
Picture not included in this copy
Avensis 6-speed gearbox (Euro):
Picture not included in this copy
Corolla 5-speed gearbox (US):
Picture not included in this copy
Possibly getting a little off-topic, but does anyone have a comparison of the stock NCP91 5-speed to a JDM AE92 Corolla 5-speed (C52?), and know if it will fit?
Seems like an odd swap. The C52 has a taller 1st gear and marginally shorter final drive, the rest of the ratios are the same as the Yaris C50. 🤷Originally Posted by 10 Francis ↑Possibly getting a little off-topic, but does anyone have a comparison of the stock NCP91 5-speed to a JDM AE92 Corolla 5-speed (C52?), and know if it will fit?
Thanks for your contribution, Great info!
I am thinking To Get a C160 LSD trans from UAE It's Available, Next Visit i will get one for my Echo i have a Question Dose the C160 transmission have a Code name on it?
The reason for my Qes is @ United Arab Emirates I No the Cars that carry the C160 trans but the thing is I have to buy the whole half cut car for the trans only, thy wont sell you the trans only.
I just buy Full Apex'e Coilovers for my Echo on the last visit.
I am thinking To Get a C160 LSD trans from UAE It's Available, Next Visit i will get one for my Echo i have a Question Dose the C160 transmission have a Code name on it?
The reason for my Qes is @ United Arab Emirates I No the Cars that carry the C160 trans but the thing is I have to buy the whole half cut car for the trans only, thy wont sell you the trans only.
I just buy Full Apex'e Coilovers for my Echo on the last visit.
I couldn't find any markings on the transmission that defined it other than it's physical size difference to the 5 spd. When I got it, I didn't know if it was LSD or not. And it wasn't. I just used the info on Wikipedia
OH I see i No the wikipedia info.Originally Posted by Bluevitz-rs ↑I couldn't find any markings on the transmission that defined it other than it's physical size difference to the 5 spd. When I got it, I didn't know if it was LSD or not. And it wasn't. I just used the info on Wikipedia
But the thing is i need the code to find it easy, there are allot gears sitting over There and that will take my time to search for it and i have a to get some part's
for a friends and to buy a car too that is the case.😕
Picture not included in this copy
OK i find this Code do you have it on your transmission, Note the number is 12 which means C160 (6-speed).
On the Wikipedia site it says (Transmission with identification code ending with 12C are LSD equipped. Code ending with 12A are non-LSD).
http://en.wikipedia.org/wiki/Toyota_C_transmission#C160
C160 ratio info.
Picture not included in this copy
OK i find this Code do you have it on your transmission, Note the number is 12 which means C160 (6-speed).
On the Wikipedia site it says (Transmission with identification code ending with 12C are LSD equipped. Code ending with 12A are non-LSD).
http://en.wikipedia.org/wiki/Toyota_C_transmission#C160
C160 ratio info.
Picture not included in this copy
cool, I never noticed that there, I'll have to look on mine. I take it that's on top?
Actually, if that's on the bell housing, I don't have that anymore. It was sold with the rest of the 5 spd a long time ago.
Actually, if that's on the bell housing, I don't have that anymore. It was sold with the rest of the 5 spd a long time ago.
Some Search TRANSAXLE ASSY part no..
TRANSAXLE ASSY, MANUAL ( 30300‑1A260 ) C160-12C LSD
1999 TOYOTA LEVIN (AE111-ACFVF) LVN BZR JPN CP 4AGE MTM 6F
Link
http://autoconnectioninc.net/DaCart/...oducts_id=8093
Picture not included in this copy
30300-1A260 TRANSAXLE ASSY, MANUAL 01.04.1997-01.08.2000 AE111..BZR ***6-speed***
30300-1A250 TRANSAXLE ASSY, MANUAL 01.04.1997-01.08.2000 AE111..BZG..6F
41301-12041 CASE, FRONT DIFFERENTIAL 01.05.1995-01.08.2000 AE11#..MTM..(BZG,FZ,XZ)
41301-12190 CASE, FRONT DIFFERENTIAL 01.05.1995-01.08.2000 AE111..MTM..(BZR,BZV) ***LSD? ***
TRANSAXLE ASSY, MANUAL ( 30300‑1A260 ) C160-12C LSD
1999 TOYOTA LEVIN (AE111-ACFVF) LVN BZR JPN CP 4AGE MTM 6F
Link
http://autoconnectioninc.net/DaCart/...oducts_id=8093
Picture not included in this copy
30300-1A260 TRANSAXLE ASSY, MANUAL 01.04.1997-01.08.2000 AE111..BZR ***6-speed***
30300-1A250 TRANSAXLE ASSY, MANUAL 01.04.1997-01.08.2000 AE111..BZG..6F
41301-12041 CASE, FRONT DIFFERENTIAL 01.05.1995-01.08.2000 AE11#..MTM..(BZG,FZ,XZ)
41301-12190 CASE, FRONT DIFFERENTIAL 01.05.1995-01.08.2000 AE111..MTM..(BZR,BZV) ***LSD? ***
Dude I've been searching for ages trying to find the C160.
I have come accross a few but they dont look the same as yours 😕 🆘
They all say in their ad that they're a C160 but Im not convinced. They look completely different. Could it be the year model? What did yours come out of?
I've attached some images, yours is the one with 3 question marks, the other is one I have foung elsewhere (1 question mark).
Also here is a link to another one on ebay (http://www.ebay.ie/itm/JDM-Toyota-Co...#ht_783wt_1114). I get that its sold but it looks different too?
🤷
I have come accross a few but they dont look the same as yours 😕 🆘
They all say in their ad that they're a C160 but Im not convinced. They look completely different. Could it be the year model? What did yours come out of?
I've attached some images, yours is the one with 3 question marks, the other is one I have foung elsewhere (1 question mark).
Also here is a link to another one on ebay (http://www.ebay.ie/itm/JDM-Toyota-Co...#ht_783wt_1114). I get that its sold but it looks different too?
🤷
2 attachments not included in this copy
Mine is pictured re-assembled with the 5 spd bell housing on it. You did read the thread right?
Hmm, all of those gears minus the 1st are longer than in my 5 spd, but that 6th does look nice.....
Every gear is shorter than the 5 spd with the 4.5 final. I regularly use 2nd to start because 1st is so short.
So, if you've got an open gearbox anyway when replacing it, can't you drop out a gear or get a different one? My first gear is rather nice, goes to about 30 mp/h.
Shift to 5th at 100-105 mp/h though, so not too bad :)
Shift to 5th at 100-105 mp/h though, so not too bad :)
The gears as far as I know are not interchangeable. 5th gear in the 6 spd only goes about 145-150km/h and has the engine turning around 4100 rpm at 100km/h. Not ideal for every day use.
No, that's a bit obnoxios indeed. I do 4000 rpm at 117 km/h GPS (so about 125-130ish clock) and 3500 rpm at 103/104 gps in 5th.
Never got to the v-max yet, I call game over after I've hit 63k in 3, 68k in 4 and then shift to 5th.
'cause honestly, all that does is increase the bill you get from the state. ;)
Never got to the v-max yet, I call game over after I've hit 63k in 3, 68k in 4 and then shift to 5th.
'cause honestly, all that does is increase the bill you get from the state. ;)
In theory the gears from 3rd to 5th could be interchanged if the shafts have the right splines, but 6th gear would require some investigation. If you need to drop the freeway RPMs in 5th gear, get a 5th gear set from an '03 Matrix C59 gearbox. Most of the 5-speed gearboxes have a 0.815:1 5th gear, but both the 5- and 6-speed gearboxes from that gen matrix have a 0.725:1 5th/6th gear respectively.Originally Posted by Bluevitz-rs ↑The gears as far as I know are not interchangeable. 5th gear in the 6 spd only goes about 145-150km/h and has the engine turning around 4100 rpm at 100km/h. Not ideal for every day use.
At this point, the only way to know for sure with the other gears is to get the parts and see if they fit.
Minor update
After going Boosted, I changed the gear lube to Royal Purple 75w-90 and it fix any problems I had with 4th gear.
I now wish I had an option to swap in a lower ratio Final Drive as I have so much torque now on the highway to save even more fuel. Average is 6.0-6.3L/100km
After going Boosted, I changed the gear lube to Royal Purple 75w-90 and it fix any problems I had with 4th gear.
I now wish I had an option to swap in a lower ratio Final Drive as I have so much torque now on the highway to save even more fuel. Average is 6.0-6.3L/100km
There is a lower final drive available for the c60 but good luck finding one, it was used on european mr2 spyders. I believe the final drive is 4.3.
I've seen the options but nothing available in North America. Monkey Wrench Racing sells them and actually I can go to a 3.9:1 but the cost for me with exchange rate is way more than my whole transmission.
I know a guy that has a link to euro c60's with high FD and LSD...$1000-ish, iirc
😲
Yeah my C160 no LSD was $600 CND
The 4.5FD was perfect for NA application but with the turbo it just revs unnecessarily high.
Yeah my C160 no LSD was $600 CND
The 4.5FD was perfect for NA application but with the turbo it just revs unnecessarily high.
Sorry, I meant lower FD... I want to say 3.9
👍
Originally Posted by thebarber ↑Sorry, I meant lower FD... I want to say 3.9
Is there a good/easy way to swap out 5th in an echo for something that'd net lower highway rpms? Will the 0.729 from a c60 fit in a C150 from an echo?
I'm not sure on that one. The Echo already has the lowest highway RPM I'm pretty sure with its .815 5th and 3.5FD
You'd have to see if there's any 5 spd gearboxes with the lower 5th. I think the spot where 6th goes is a different Ø
You'd have to see if there's any 5 spd gearboxes with the lower 5th. I think the spot where 6th goes is a different Ø
C53 and c59 have .725 5th gears...
Chances are pretty good that it'll fit, but you won't know for sure until you're holding them both in your hand.
This is an awesome project and I bet it is a blast to drive! But after doing the gear shift drop calculation, you can see the 6600 redline will lead to a LOT of shifting.
1 attachment not included in this copy
Hi Guys,
Im thinking about buying a C160 with Factory LSD from the AE111.
My Echi is equipped with the C154, but noted BlueVitz you had the C150??
Also is your dash Digital? Any issues with that?
I was looking for a C56 from the Japanese Vitz but they seem harder to find!
Im thinking about buying a C160 with Factory LSD from the AE111.
My Echi is equipped with the C154, but noted BlueVitz you had the C150??
Also is your dash Digital? Any issues with that?
I was looking for a C56 from the Japanese Vitz but they seem harder to find!
What chassis are doing the conversion in?Originally Posted by Gorilla ↑Hi Guys,
Im thinking about buying a C160 with Factory LSD from the AE111.
My Echi is equipped with the C154, but noted BlueVitz you had the C150??This shouldn’t make any difference. All C series bell housing are interchangeable.
Also is your dash Digital? Any issues with that?No, I have the analog dash with tach.
I was looking for a C56 from the Japanese Vitz but they seem harder to find!
He has an Echo like yours NCP13 Australian Model