Yarisworld Archive

Help : door lock manual-power conversion

4 posts · 3,319 views

castOriginal postNew England · Mar 24, 2010#1
Hi,

I bought a keyless entry kit from Ebay. When I tried to install it, I realized that that kit was for powered door lock only which does not include any actuator. Since I can't return the kit, my questions are :

(1) if I get some aftermarket actuator, can I get it to work?
(2) If so, what type of actuator should I get?
(3) with the aftermarket actuator, where is the best position to mount it. I only plan to power the lock on driver's side.

My car is 07HB. The keyless entry kit is VIPER 211HV.

Thanks a lot.

Replies 3

H3LlIoNMidatlantic · Mar 24, 2010#2
Viper sells actuators too, although your best and easiest bet is to just jack the OEM equipment out of a wrecked yaris and put it in place. It'd be the easiest thing to do, both from an acquisitions standpoint as well as mounting location.
castThread starterNew England · Mar 24, 2010#3
It is almost impossible for me to find the a wrecked yaris in my area. So I guess I have to find the aftermarket actuators. But I don't know too much about this stuff. Not sure if anyone will work or I need to choose a specific one with certain size/shape.

Originally Posted by H3LlIoN ↑
Viper sells actuators too, although your best and easiest bet is to just jack the OEM equipment out of a wrecked yaris and put it in place. It'd be the easiest thing to do, both from an acquisitions standpoint as well as mounting location.
CTScottUSA, CT · Mar 24, 2010#4
Check out this thread for a very similar discussion with info on the A-1 aftermarket actuators:

Factory Electric Locks