Yarisworld Archive

Ignition vs. Roll start?

54 posts · 31,478 views · page 2 of 2

Replies continued

dingbatMid-Turn (probably late apexing) · May 17, 2010#51
Originally Posted by Rick ↑
Nope, It's more like someone in a gunfight with a revolver. While he only has six shots before he has to reload (bump-start the engine), if he can't solve his immediate problem in six shots he really shouldn't be attending gunfights (shouldn't be driving).
Poor analogy.
Never underestimate a man with a wheel gun.😳🙇


With a little practice and a speed loader, even a mere mortal can put a revolver back in play fairly quickly.
127.0.0.1NE · May 17, 2010#52
Originally Posted by BailOut ↑
I'm coming up on 60k miles with the OEM battery and starter despite using them several times per day. What is the magic number that they should blow up at, do you think? Tell us, oh doomsayer! 🤣


real info on starters and how long they last.

it is how long the copper contacts last.

which is usually around 110,000-160,000 miles on a long-trip dd
and 70,000 - 100,000 miles on a short trip dd
---------------------------------------
replacing the contacts (which are 20 bucks) the starter
should last past 350,000 miles.
Bluevitz-rsOshawa, Ontario, Canada · May 17, 2010#53
Originally Posted by 127.0.0.1 ↑
real info on starters and how long they last.

it is how long the copper contacts last.

which is usually around 110,000-160,000 miles on a long-trip dd
and 70,000 - 100,000 miles on a short trip dd
---------------------------------------
replacing the contacts (which are 20 bucks) the starter
should last past 350,000 miles.
And if you own a torch and a brass rod, you can braze the worn part, fill it down and it'll outlast the life of the engine.


The starter contacts died on my old '85 Honda when it only had 60 something thousand Km on it. My dad brazed the contacts, and it now has 348000km on it. I don't know why they don't just make them out'a brass to begin with? Oh, wait, they'd never need to sell you a new $300 starter.
yarrrnew mexico · May 18, 2010#54
Originally Posted by dingbat ↑
Interesting thread. Got me thinking about some things.

What does the extra wear an tear on the car translate to in barrels of crude? If the life of the starter, trany, etc. is shortened, how much energy does it take to manufacture, transport, and install those parts? Is it less than the amount saved by this practice and how much less?

If shutting the engine off when coasting does increase the risk of accident, what is the percentage of people doing this that will end up in an accident? Will the gas savings of all the other folks who don't end up in an accident off-set the equivalent cost in crude of the tow truck, police cruiser, medical emergency vehicle, being run to and from the scene for the one that does? The cost of replacement parts, installation of those parts etc......?
👏

👏

👏

Take out the ifs, and I agree 100%. Don't forget if you're turning your engine off, you're already at 40+ PSI in the tires - combined with no engine, I'm betting bailout&co hit 0 about 20-30 feet after a stock yaris. This is what is called "common sense" and if you use it, you realize just about every hypermiling "technique" has a chance of costing you your life at worst, and more money than you're saving on gas at best.

Originally Posted by Loren ↑
I don't get extreme with it. I don't drive slower than the flow of traffic, and generally don't accelerate slower than they typical "slow poke", I don't run red lights, and... what was this thread about? Oh yeah... I don't shut off the ignition in my normal driving. To me, it's far more trouble than it's worth for daily driving.
This is safe sane hypermiling. Saving gas, no chance of killing people, nice stuff all around, no?

Much past that, its just a game and a gamble if you are going to save any money.