AzNguyOriginal postTN · Mar 17, 2010#1Well idk if you guys want to but your going to have to drive down here and get it yourself and replace the aftermarket with your stock one.
PM me with other questions
K&N intake
AOE Tigertec springs
*exhaust setup ( magnaflow high flow cat + 2.25" piping + super turbo dynomax muffler + borla tip) - you need to switch your stock sedan exhaust with this one.
Replies 15
counterfiendDallas, tx · Mar 17, 2010#2So the foglights and eyelids......
What if i payed shipping both ways for everything?
AzNguyThread starterTN · Mar 17, 2010#3The thing is, i'm not a mechanic and I got someone else to install my stuff except for the eyelids. But, I'd rather not deal with getting them off or I'll break it.
counterfiendDallas, tx · Mar 17, 2010#4Hmmm, send me a PM
H3LlIoNMidatlantic · Mar 17, 2010#5You have PM.
RHDVIPbBLouisville, KY · Mar 17, 2010#6Where in TN are you located? I am in Louisville, KY. I am interested in the springs and intake.
AzNguyThread starterTN · Mar 17, 2010#7Clarksville, TN 37043. H3Llion pm'd me first about the intake. But you can have springs, RH.
Also, the car is "stuck" at the autobody shop so bring your own tools.
I had these mods on for the maximum of 4 months. :) So still super clean and nice.
RHDVIPbBLouisville, KY · Mar 17, 2010#8Why is it stuck at the shop? I was going to see if I could trailer you and the car up here to my garage and do the swap since I have more than enough tools to do it.
And UR swaybar.....Very interested in that.
JumpmanYarisSO. INDIANA · Mar 17, 2010#9I left you a voicemail
AzNguyThread starterTN · Mar 17, 2010#10 Originally Posted by
RHDVIPbB ↑ Why is it stuck at the shop? I was going to see if I could trailer you and the car up here to my garage and do the swap since I have more than enough tools to do it.
And UR swaybar.....Very interested in that.
The guy said he can't take the chance because of liability. They cut the door handle out, so the door swings and also, the seat belt on driver's side doesn't work anymore. But I'll ask if someone can come and put it on a trailer. It's driveable in my eyes. just got to hold the door shut with one hand. :) i'll let you know if h3Llion backs out on the intake.
I think Jumpmanyaris wants the UR swaybar
AzNguyThread starterTN · Mar 23, 2010#11first post updated. idk what happened to the other 2 who wanted these stuff but i still have K&N CAI and Tigertec springs up for grabs. i'm trying to convince the autobody shop to let me take the car back to my house.
heeroyuy01195Florida · Mar 23, 2010#12would you be willing to sell and ship the K&N intake?
AzNguyThread starterTN · Mar 23, 2010#13nope. i don't have time.
JumpmanYarisSO. INDIANA · Mar 23, 2010#14 Originally Posted by
RHDVIPbB ↑ Where in TN are you located? I am in Louisville, KY. I am interested in the springs and intake.
Are you going to get this? We couldnt take the spings out because I didnt have the tools for this
RHDVIPbBLouisville, KY · Mar 24, 2010#15Well, right now I am a little busy but can you send me pics of the exhaust setup and is it loud or deep? I am willing to drive down and switch the intake and exhaust out.
Jumpman, I could probably get a spring compressor, but I don't have access to my smaller air compressor for my air tools.
AzNguyThread starterTN · Mar 24, 2010#16Sorry no clear pics of exhaust but you can see the tip in the youtube video.
http://www.youtube.com/watch?v=R0DuRoqPSHE This video was made alittle while ago and sorry my camera phone is too close to the exhaust. I would have to say it's more of a medium sound. Not loud like jumpmanyaris's new exhaust.
Jumpman also took the CAI out for me already so it's ready to go. :) Also one more thing, car is going to go bye-bye soon. Idk when. Just let me know the date and I'll probably ask the shop if the car is still there.