Yarisworld Archive

typicaljawaiian's '09 Yaris Sedan "Audio Build"

73 posts · 29,088 views · page 2 of 2

Replies continued

typicaljawaiian808Thread starterHawaii · May 25, 2010#51
Yeah, the dog was trippin. The driver and passenger windows were down
EmergeSacramento, CA · May 26, 2010#52
I had the video on mute, but wow at how much the car's windshield and roof move!
talnlnkySpokane, Wa · May 26, 2010#53
What type of wood is that?
Any plans to glass the inside of the box or round the inside corners?
talnlnkySpokane, Wa · May 26, 2010#54
Originally Posted by derickveliz2 ↑
Man! I couldn't stop laughing at the doggy! trying to find out what was all that noise. LOL

Hey now we need to think about putting MAT on the Windshield %@%@ $^@! that is not going to work...

Did you do that with windows all the way up?

Looks good.
You'll want more than just mat... you want to use expaning foam inside the pillars. Foam comes in a can, you spray it in, it expands, then hardens. Increasing rigidity will be more beneficial than adding weight (lowering ressonance frequency). Have to be careful with the foam tho, foam can bend the sheet metal if you are careful.
EmergeSacramento, CA · May 26, 2010#55
Ok, I just heard the video.

Do your ears matter much? Lol sounds like fun, I would have to be a couple blocks away to enjoy it though.
typicaljawaiian808Thread starterHawaii · May 28, 2010#56
Ok, so I need to be able to put a few things in the trunk so............... I built this.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

That Amp Rack is gonna get carpeted and the box painted and stuff, but this is it at the moment
typicaljawaiian808Thread starterHawaii · Jun 1, 2010#57
FOR SALE

150 / 320 amp DC Power Alternator!!!

My Stetsom amp can't handle the voltage the alt puts out guys. The regulator setpoint is set at 15 volt @ 2500+ rpm. Anything over 14.7 and the amp goes into protect. I'd rather get another alt than another amp. Love the Stetsom.

I'm not saying the DC alternator is s**tty, cause it's not. I'll be ordering from Rob at DC Power again, just gonna get a 270 XP

PM me for price and more details

It was only installed for a day and a half
The ArchitectFL · Jun 1, 2010#58
just get a external voltage regulator aka "MLA piece"
typicaljawaiian808Thread starterHawaii · Jun 2, 2010#59
Man, I been on the hunt for one this whole week. DC Power is not getting back to me, Irragi hasn't got back to me, Mechman says they have nothing. I'll try excessive amperage and MLA tomorrow. I really want to send it back to DC but Rob said to wait, he's working on it.

I got a comp in 3 weeks and I wanna win. Well see what happens.

I'll just say this, if I had the Sundown saz 3500d like I originally planed on, I wouldn't be having this problem.

Not saying anythig bad about Stetsom or DC Power though. Like I said, if I sell this alt I WILL order another alt from DC, just w/ a lower voltage setpoint.
talnlnkySpokane, Wa · Jun 2, 2010#60
Originally Posted by typicaljawaiian808 ↑
Man, I been on the hunt for one this whole week. DC Power is not getting back to me, Irragi hasn't got back to me, Mechman says they have nothing. I'll try excessive amperage and MLA tomorrow. I really want to send it back to DC but Rob said to wait, he's working on it.

I got a comp in 3 weeks and I wanna win. Well see what happens.

I'll just say this, if I had the Sundown saz 3500d like I originally planed on, I wouldn't be having this problem.

Not saying anythig bad about Stetsom or DC Power though. Like I said, if I sell this alt I WILL order another alt from DC, just w/ a lower voltage setpoint.
WHAT... and give a canadian your money.. hehe... naw... he's a nice guy, I remember him posting on the soundillusions forum WAY before he started selling audio equipment. Always seemed like a decent guy.
typicaljawaiian808Thread starterHawaii · Jun 3, 2010#61
Bump for a 270 xp
typicaljawaiian808Thread starterHawaii · Jun 3, 2010#62
Talked to Chris at Missing Link Audio, I'm not a totally hopeless case!
The ArchitectFL · Jun 3, 2010#63
of course you arent thats what that company was started for, youll be up and running in no time.
ArkhangelPuerto Rico · Jun 3, 2010#64
Originally Posted by typicaljawaiian808 ↑

Picture not included in this copy

That Amp Rack is gonna get carpeted and the box painted and stuff, but this is it at the moment
Got a question about boxing in the amp i have a similar build just that im placing the amps under the wood. would boxing them in that way over heat the amps? at the moment i drive around with out the wood floor on and wondering about the over heating issue..
Alot of you have more experience with this then me so what you think?
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
typicaljawaiian808Thread starterHawaii · Jun 5, 2010#65
Did some finish work so........... Here it is

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Heres what it looked like w/ the plexi on it, but that cracked and got paint on it so i need to cut a new piece

Picture not included in this copy

Im gonna "Bodywork" the enclosure, so all those screws and imperfections will go away
typicaljawaiian808Thread starterHawaii · Oct 15, 2010#66
Picture not included in this copy

143.7 @ 37 hz was a little test run on the Term-LAB. My comp score (official) is a 144.3...not bad for a trunk car.

Did a little more work since the last post ( got a couple more additions also)

Some decals

Picture not included in this copy

Picture not included in this copy

Pioneer 5 1/4's

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Kinetik 1200 under the hood and 2400 in the trunk

Picture not included in this copy

Picture not included in this copy

Couple 'o tweets

Picture not included in this copy

Picture not included in this copy

Theres a bunch more evevn since these pics so keep posted!
derickveliz2Central, MA · Oct 15, 2010#67
😁

CONGRATULATIONS!!!

👍 I like the sticker, did you do it by your self? more info please! 👍

Picture not included in this copy



I hope doesn't rains too much in Hawaii 🙄 ...

Picture not included in this copy








Thanks!
D.
typicaljawaiian808Thread starterHawaii · Oct 15, 2010#68
The decals i got from a guy on the SMD forum, screen name "mr. p"

thanks for the comments. My goal is to break 145 db on the term lab.....well see
SlickHouston, Texas · Oct 15, 2010#69
Simply amazing man, grats on the 144. I like the decals as well, no too over the top. :)

So did you get your Alt prob hammered out? An h/o alt is next on my list and Iraggi apparently went under. Let me know. :) I need about a 250a alt.
sickpuppy1Kansas · Oct 15, 2010#70
Somehow I cant picture you playing IZ on that thing,lol
typicaljawaiian808Thread starterHawaii · Oct 16, 2010#71
@ -slick Yeah bro, the alternator situation got squared away. I swapped my Stetsom amp for a Sundown and everythings fine now. I also upped my RPM's a little tonight so my voltage is looking really good. Get in touch w/ Rob over there at DC Power Engineering and he should be able to get you set up w/ something

@ - sickpuppy You know what man......thats crazy because i have never played IZ on the system yet. Im on it tomorrow
SlickHouston, Texas · Oct 16, 2010#72
So the sundown is 15v+ capable? Out of curiosity, does the DC alt have the wire terminals that are ran on the stock alt? Or did you have to buy some sort of an adapter.

Again, great stuff. I just finished dropping roughly $1,500 on misc suspension and cosmetic upgrades. My next spending spree is going to re-upgrade my sub-stage.
typicaljawaiian808Thread starterHawaii · Oct 16, 2010#73
slick - the alternator came "plug and play" man. The sundown amp is 15v capable. I had a friend running a crx w/ 16 volt batts and sundown amps. Throw up a build log when you start your sytstem bro🤘