Yarisworld Archive

DIY Leather Wheelskin Install / Pics Inside

14 posts · 7,932 views

YarisSedanOriginal postCalifornia - Bay Area · Mar 5, 2010#1


Step 1: Remove from the box your new wheelskin and thread and needle. Unravel the thread completely so there are no knots at all and thread the needle.



Step 2: Punch out any loose chads. I would take the needle and poke out every hole just to be on the safe side when I did mine there were about 10 chads that fell out. If not they will come out while you are stiching and you will have an annoying bump.



Step 3: Start between one of the spokes but not at a seam. When sewing to save time go through two holes at once as show in picture.



Step 4: Between finger and thumb pull extremely hard after every stitch. Wearing gloves is highly recommended . Even with gloves your finger will be sore when you are done. From start to finish its going to take at least a hour so take your time.



Step 5: When coming to a spoke skip 4 holes and loop around the front for a false stitch. Keep note however many holes you decide to skip start at that same place when you continue. If easier rotate the wheel so you can see from the back the holes you missed. Otherwise you will find out the hard way when you finish you missed a stitch.



Also note make sure you are still keeping the line taught compare to the previous pic you can see how it looks loose. I had to go back and redo that spoke.



Step 6: When you are finished tie a double knot and cut off the loose ends. Take a flat head screwdriver and gently tuck it in. Enjoy your new leather steering wheel.

Replies 13

YarisSedanThread starterCalifornia - Bay Area · Mar 5, 2010#2
Side note if your curious about trying this but not sure what color matches your interior you can have them mail you swatches for free on their website http://wheelskins.com/. I found their charcoal color is a nearly dead match to my interior. This is a easier and cheaper method than changing out the entire steering wheel. And easily reversible if you sell the vehicle or change your mind down the road.
RedRideMiddletown, NY · Mar 5, 2010#3
Excellent DIY 🙂
Yaris4everAustralia · Mar 6, 2010#4
Well done, looks great 👍
kazama82Malaysia · Mar 8, 2010#5
maybe if used black or red thread look more sporty..:)..but very nice DIY
MUSKOKA800Chatham, Ontario, Canada · Mar 10, 2010#6
It's been a few days now. Are you satisfied with the results? Would you do it again?

NOTE: I requested samples or black, charcoal and grey.
My sedan has a charcoal (almost black) interior with silver accents.
YarisSedanThread starterCalifornia - Bay Area · Mar 10, 2010#7
Really depends on driving style. Since i drive super aggresive i noticed i cant use the thumb grips by the spokes because the cover adds a little bit of bulk. If our factory wheel was a little thinner like some hondas then the cover would be perfect. So not sure about it so much now. Cosmetically i think a all plain charcoal cover would look perfect especially if you do a baseball stich will look oem. If you plan to do that make sure you request 2 threads when you order.
auxmikeLI, New Yawk · Mar 10, 2010#8
Originally Posted by YarisSedan ↑
Really depends on driving style. Since i drive super aggresive i noticed i cant use the thumb grips by the spokes because the cover adds a little bit of bulk. If our factory wheel was a little thinner like some hondas then the cover would be perfect. So not sure about it so much now. Cosmetically i think a all plain charcoal cover would look perfect especially if you do a baseball stich will look oem. If you plan to do that make sure you request 2 threads when you order.
Did you need two threads to do yours?
I thought everything needed would already come with it.
Also, what size/diameter did you buy?
BTW🙌 great job!
YarisSedanThread starterCalifornia - Bay Area · Mar 10, 2010#9
Originally Posted by auxmike ↑
Did you need two threads to do yours?
I thought everything needed would already come with it.
Also, what size/diameter did you buy?
BTW🙌 great job!
I just used one thread. I am not sure the diameter if you go to the website you put in your vehicle information and they will send you the exact size.
2009BBPliftbackWestern PA (Franklin) · Mar 12, 2010#10
Awesome I just installed mine today and love it.. My hands are a little raw but I will heal. I went with the grey color so I have a little contrast nice write up btw.
fluke_boyThe Villages, FL · Mar 17, 2010#11
Awesome find YarisSedan.
MUSKOKA800Chatham, Ontario, Canada · Mar 17, 2010#12
Originally Posted by YarisSedan ↑
Really depends on driving style. Since i drive super aggresive i noticed i cant use the thumb grips by the spokes because the cover adds a little bit of bulk. If our factory wheel was a little thinner like some hondas then the cover would be perfect. So not sure about it so much now. Cosmetically i think a all plain charcoal cover would look perfect especially if you do a baseball stich will look oem. If you plan to do that make sure you request 2 threads when you order.
1)Do they provide instructions for this "baseball stitch"?

2)And did you use any adhesive or double-sided tape to hold the leather in place to get started?

3)Is you sedan dark charcoal grey like mine? Tough to tell in the photo's.
YarisSedanThread starterCalifornia - Bay Area · Mar 17, 2010#13
No but if you google baseball stich wheelskin there are lots of diys with pictures. The leather is super super tight. Took me a while to work it on to the wheel. It does not move at all. And yes my interior is the same as yours.
Qilene15Orlando · Mar 19, 2010#14
This is what mine looks like, my girlfriend got it for me. Matches the interior quite nicely. Will eventually change out seats for something that matches the colors of it (black outside, sand inside). Here's the link. The picture is too big dunno how to resize.

http://img19.imageshack.us/img19/7088/0319001638.jpg