Yarisworld Archive

PCV Valve Replacement

23 posts · 41,950 views

devinlamotheOriginal postSudbury, Canada · Feb 13, 2010#1
Hey guys. So the other day I was reading around about regular maintenance and I realized I never had the PCV valve looked at.

I pulled off the hose and immediately noticed oil on the end of the tip. After taking the valve off, I noticed the inside pretty dark, which is normal. However, the metal sliding mechanism did not sound good. The replacement PCV I received from Toyota clicked rapidly if you shook it, while the old one clicked only once or twice, so it seemed pretty gunked up.

I'm sure those of you with an oil catch fair better, but I am at 160,000km without one so this was a good investment. The idle also seems to be better, not sure if it is placebo but I swear it's smooth as butter now and not jumping from 500-800rpm.

BTW it cost me $18 CAD at the dealer ... rip off and a half if you ask me, but I wanted a genuine part.

Replies 22

YarisSedanCalifornia - Bay Area · Feb 14, 2010#2
I just take mine out and clean it with carb cleaner every 20k miles or so to keep it running smooth and good. Might change it at 100k just as preventative maintanance.
devinlamotheThread starterSudbury, Canada · Feb 14, 2010#3
Originally Posted by YarisSedan ↑
I just take mine out and clean it with carb cleaner every 20k miles or so to keep it running smooth and good. Might change it at 100k just as preventative maintanance.
Ya I think I will start cleaning it out when I change my air filter. It seemed pretty gunked up.
Hard_YarisEdmonton Alberta · Feb 15, 2010#4
Where is the PCV located? Could anyone do a quick DIY on the location and the steps involved locating and removing?
hatchbackkid82. · Feb 15, 2010#5
+1
Originally Posted by Hard_Yaris ↑
Where is the PCV located? Could anyone do a quick DIY on the location and the steps involved locating and removing?
mikenacaratoBrentwood, TN · Feb 15, 2010#6
take off the vvti cover on your engine. underneath that is the valve cover. on the drivers side of the valve cover there is a hose going into the back right corner that attaches to a fitting screwed into the valve cover. that fitting is the pcv valve. with the proper size wrench or maybe an adjustable you can remove it.
devinlamotheThread starterSudbury, Canada · Feb 15, 2010#7
You need a 19mm deep socket to remove the PCV valve.

When I replaced mine I also put some anti-seize on the thread, since taking the original off took some force with breaker bar. Should make it easier the next time around.

Takes about 10 mins to replace.
Hard_YarisEdmonton Alberta · Feb 16, 2010#8
Thanks for the explanation are there any photos to clarify more?
schleppyBoston, MA · Feb 17, 2010#9
What is the normal service interval on the PCV valve?
YarisSedanCalifornia - Bay Area · Feb 17, 2010#10
Originally Posted by schleppy ↑
What is the normal service interval on the PCV valve?
Usualy 100k
Hard_YarisEdmonton Alberta · Feb 17, 2010#11
I found and removed the PCV Valve and cleaned it, checked it, and replaced it!🙂 A lot easier than I thought. This Forum is the greatest.
detroiterMetro Detroit · Mar 19, 2011#12
Just replaced mine today, old one had a bit of buildup on it. Seems like the new valve threads in a bit easier than the factory one too, tightened it snug but not very tight. Not sure if you can hurt the valve or engine by trying to make it very tight.
devinlamotheThread starterSudbury, Canada · Mar 20, 2011#13
Originally Posted by detroiter ↑
Just replaced mine today, old one had a bit of buildup on it. Seems like the new valve threads in a bit easier than the factory one too, tightened it snug but not very tight. Not sure if you can hurt the valve or engine by trying to make it very tight.
Yeah actually I just ordered a replacement, that time of year again to replace it (cheap insurance).
Klink10910 · Mar 20, 2011#14
Cleaned mine today though it really didn't need it. Thanks for posting the reminder.
sant_ashuscotland · Mar 9, 2013#15
anybody having pictures to show the location n replacement of pcv valve with pics.

Toyota yaris 1.0 2004
hw6515U.S · Mar 9, 2013#16
Originally Posted by sant_ashu ↑
anybody having pictures to show the location n replacement of pcv valve with pics.

Toyota yaris 1.0 2004
I can take pic if you need one, but is easy to find with that img in the link

PCV Valve
sant_ashuscotland · Mar 14, 2013#17
Originally Posted by hw6515 ↑
I can take pic if you need one, but is easy to find with that img in the link

PCV Valve
please post a colored pic with some arrows that will be great.

you can post on the thread above.
cheers
🤘👍🎉
junorico24Sydney · Mar 14, 2013#18
This is on my hit list.Will do it next, i am on 93 000 Ks Thanks for the heads up mate!

I've changed the drive belt, manual transmission fluid. This is next. :) anything else we should service or replace?
Hersheynortheast · Mar 14, 2013#19
" My engine idles rough and oscillates badly when either in drive or a/c on in drive; when in neutral, it idles smoothly. I would like to know before the check engine light comes on. "

Our '08 sedan has done this since new . Replaced the P.C.V. at around 20,000 miles and no difference . Still idles rough when in gear at stops or idling . Fine when in neutral or park . The car now close to 58,000 miles .
Hersheynortheast · Mar 15, 2013#20
Thought it might help with the rough idle . No difference . Not all that expensive or difficult to replace .
UberSilverAlameda,Ca. · Mar 15, 2013#21
Just cleaned mine, it was a little clogged. Runs smoother now.
Kaotic LazagnaCentral Valley, CA · Mar 15, 2013#22
Checked mine. Have about 90500 miles on the odometer. Wasn't clogged, rattled freely. Cleaned it off anyway and put it back in.
Kaotic LazagnaCentral Valley, CA · Mar 16, 2013#23
Originally Posted by Yarflana ↑
Thinking about checking mine tomorrow as well. Must be a fad.
lol. One of the bigger things right now on YW, I guess. Since everyone was talking about theirs, and since it's such an easy thing to check and clean, I just thought, "might as well." Also wanted to see the condition of mine after 90,500 miles. 🙂