yaris-oneOriginal postValdosta GA · Feb 13, 2010#1so i get the front sway bar, ordering the rear soon, i install it, and no troubles
drive the car to work, fine, handles a little better, i like it so far
on my way home i take a left turn at a decently high speed, im not drifting or anything, just hugging the corner a little. well my check engine light starts blinking, so i back of the throttle, turn my music off and listen, it stops blinking and stays off....i pop the hood take a look, everything looks fine.
next day, same corner, same speed, same blinking, but this time it stays on, get home, turn car off, pop hood, nothing seems wrong, check fluids and electrical connections, all good, check engine light still on..........suggestions
im going to call a repair shop on monday, but id like to try and figure the problem myself before i have to drop a bunch of cash, its very frustrating when i go to work, fix multimillion dollar aircraft and my yaris confuses me...lol
Replies 14
slothman86Savannah, GA · Feb 13, 2010#2check engine or service maintenance?
Picture lost · i.ehow.com
Picture lost · www.pwn3d.us
AltitudeColorado · Feb 13, 2010#3Maybe knocked a connector slightly loose and the forces of the curve are enough to break contact?
YAR1SRaleigh, NC · Feb 13, 2010#4 Originally Posted by
slothman86 ↑ check engine or service maintenance?
LOL. I'd laugh so hard if this was it.😆
auxmikeLI, New Yawk · Feb 13, 2010#5If you had the Scanguage II.........
DaveToronto · Feb 14, 2010#6I thought flashing CE lights were typical of misfire problems.
cali yarisCanoga Park, CA · Feb 14, 2010#7^ yes - blinking CEL is not good, definitely not related to maintenance required. if both came on, you might have an electrical problem.
why not take it to the dealership? are you out of warranty?
where did you get your front sway bar?
yaris-oneThread starterValdosta GA · Feb 14, 2010#8no its not maint reqd, just changed the oil in fact.
no main reqd light at all, CE light started blinking in the curve, and for a couple secs afterwards, then stayed solid.....not out of warranty, was just trying to figure it out on my own for now.
whats a scangauge II?
and i got the strut bar from micro. figured it might have been some kind of shorting problem considering its mounted almost directly over the battery contacts.
jambo101Montreal Canada · Feb 14, 2010#9An 09 has to be still under warranty,let the dealer figure it out. A Scan gauge is an onboard engine computer..
http://www.scangauge.com/ ryotaRochester NY · Feb 15, 2010#10if you don't want to spend the cash on a scanguage II you can also go to an advanced auto or other auto parts store and they usually have a code reader that they will let you use for free... it came in handy with my old car a few times
yaris-oneThread starterValdosta GA · Feb 16, 2010#11Ok im gonna go to autozone but where do I connect the code reader at? I have an 09 sedan.
yaris-meAnaheim, CA · Feb 17, 2010#12On the lower left side of the dash, there is a compartment. Remove the compartment and behind is the OBD II connector.
jambo101Montreal Canada · Feb 17, 2010#13 Originally Posted by
yaris-me ↑ On the lower left side of the dash, there is a compartment. Remove the compartment and behind is the OBD II connector.
Actually if you look underneath that compartment the OBD11 connector is pointing straight down,no need to remove the compartment door..
41magmag41New hampshire · Feb 25, 2010#14Just a thought, when you changed the oil did you fill it properly with new oil??? If not going around a corner might oil starve the enging and thus the light would come on.
thebarberGrand Rapids, MI · Feb 25, 2010#15maybe its time to top off your washer fluid, captain corners...