Yarisworld Archive

ebay OEM fit projector fogs

26 posts · 6,680 views

Replies 25

Kaotic LazagnaCentral Valley, CA · Feb 5, 2010#2
That's cool, but I'd save the halos for the headlights.
ezhacker1Thread starterSan Francisco · Feb 5, 2010#3
yeah, im thinking if i would like having halos there or not, but just dont wire them in, still having oem fit projectors is nice. I still dont know if i want to spend the time to cut a hole in my fog covers for the housing on my projectors. I might just buy these to see if the cutoff is as good as mine.
1NZYaris1New Zealand · Feb 5, 2010#4
They look cool .
petty they dont ship oversea's🙁
Kaotic LazagnaCentral Valley, CA · Feb 5, 2010#5
Originally Posted by ezhacker1 ↑
yeah, im thinking if i would like having halos there or not, but just dont wire them in, still having oem fit projectors is nice. I still dont know if i want to spend the time to cut a hole in my fog covers for the housing on my projectors. I might just buy these to see if the cutoff is as good as mine.
Awww, where's the fun in that? LOL. I cut one of my foglight covers by hand with a X-acto knife. I did the other with a dremel (finally found someone I knew who had one, lol). 😛😁
ezhacker1Thread starterSan Francisco · Feb 5, 2010#6
im thinking of using those things that cut holes for door handles.
marcustoronto, canada · Feb 5, 2010#7
i like i like....
JumpmanYarisSO. INDIANA · Feb 5, 2010#9
Could this be converted to HID?
ezhacker1Thread starterSan Francisco · Feb 5, 2010#10
would be as easy as throwing a HID set, only problem is if the shield can handle that extra light and make a good cutoff, or the cutoff in general.

on a side note, if they would only hurry up and bring out 09+ head and taillights
Kaotic LazagnaCentral Valley, CA · Feb 5, 2010#11
Originally Posted by JumpmanYaris ↑
Could this be converted to HID?
I'd keep it down to 35w. I'm assuming that the reflector bowl is small, so it wouldn't be able to handle the heat produced from a 55 watt kit without doing damage to something.
Kaotic LazagnaCentral Valley, CA · Feb 5, 2010#12
Originally Posted by ezhacker1 ↑
im thinking of using those things that cut holes for door handles.
You can ghetto-rig yourself something. Something to the extent of a string attached to a really sharp razor/knife that's the radius of the circle you want, with the other side super glued to he midpoint of the diameter of the would-be circle. Make taut and start carving away at the cover.
YarisSedanCalifornia - Bay Area · Feb 5, 2010#13
dang i just bought foglights otherwise i would grab these.
Kaotic LazagnaCentral Valley, CA · Feb 5, 2010#14
If you really want them you can sell the ones you just bought. hehehe.
ezhacker1Thread starterSan Francisco · Feb 6, 2010#15
yeah im also considierng these...but i just did my projector project about a month ago, i also have Garm's kit, i just used the wires from it for my projector.
Dj_SloKidFlorida · Feb 25, 2010#16
i hate halo, just looks tacky if u ask me, but i sure do love any headlight or fog retrofitted
JumpmanYarisSO. INDIANA · Feb 26, 2010#17
Originally Posted by Kaotic Lazagna ↑
I'd keep it down to 35w. I'm assuming that the reflector bowl is small, so it wouldn't be able to handle the heat produced from a 55 watt kit without doing damage to something.
I just got the hids that garm has for fogs so would that work? I dont think it says on the his site how much watts it puts out. You think the bulb would clear?
cali yarisCanoga Park, CA · Feb 26, 2010#18
they don't show them installed?
Kaotic LazagnaCentral Valley, CA · Feb 26, 2010#19
Originally Posted by JumpmanYaris ↑
I just got the hids that garm has for fogs so would that work? I dont think it says on the his site how much watts it puts out. You think the bulb would clear?
I believe he sells 35w kits. It should work. But if it happens to be 55w and if the casing and/or lenses of the foglights are plastic, I'd take a look at it everyday, make sure they're not melting. If they're some type of metal and the lenses are glass, you should be good (unless the foglights are incredibly small).
1.5Tampa · Feb 26, 2010#20
micro image has projector fogs!!!!
LEGATO``Virginia Beach · Feb 26, 2010#21
well there is a 3 day exchange on the ebay sites
JumpmanYarisSO. INDIANA · Feb 27, 2010#22
Originally Posted by Kaotic Lazagna ↑
I believe he sells 35w kits. It should work. But if it happens to be 55w and if the casing and/or lenses of the foglights are plastic, I'd take a look at it everyday, make sure they're not melting. If they're some type of metal and the lenses are glass, you should be good (unless the foglights are incredibly small).
Thats a pretty good question I remember the pice of $#!+ ones It got melted and the Glass craked😠 and the OEM ones are $121.78 and thats just for ONE SIDE ONLY😲 I just wonder if they are Glass and if its metal ?
Kaotic LazagnaCentral Valley, CA · Feb 27, 2010#23
Originally Posted by JumpmanYaris ↑
Thats a pretty good question I remember the pice of $#!+ ones I got melted and the Glass craked😠 and the OEM ones are $121.78 and thats just for ONE SIDE ONLY😲 WTH I just wonder if they are Glass and if its metal ?
I helped my roommate buy her bf an all metal and glass projector and 3000k HID kit for a total of $109 for his Celica. Price doesn't necessarily tell all. hehehe.
JumpmanYarisSO. INDIANA · Feb 27, 2010#24
Thats a deal! But the thing is that most of the the stores that has this fogs are replicas "oem" and are cheap in all meaning price and quality but like they say u get what u pay for
Kaotic LazagnaCentral Valley, CA · Feb 27, 2010#25
Originally Posted by JumpmanYaris ↑
Thats a deal! But the thing is that most of the the stores that has this fogs are replicas "oem" and are cheap in all meaning price and quality but like they say u get what u pay for
Yeah, I'm planning on rebuilding my fog lights, by that I mean re-chrome the inside and repaint the exterior. hehe. Don't want to buy new fog lights.
marcustoronto, canada · Mar 2, 2010#26
anyone tried this yet im curious how it look like..with hid ofcourse