Yarisworld Archive

ever notice ...

22 posts · 6,835 views

HersheyOriginal postnortheast · Feb 4, 2010#1
that when using a synthetic that it doesn't like to adhere to the metal dip stick for a proper reading . I keep the dipstick so the dots face towards the engine for a good read . Any of you have that issue ? The synthetic would hold to the yellow dipstick of the '08 YARIS H.B. much better for a reading level . Wonder if I could get one from parts department to replace the metal one . Would the yellow plastic dipstick work with the YARIS sedan as well ? 🤷

Replies 21

Yaris HiltonBristol, Tennessee, USA · Feb 4, 2010#2
Engine's the same. Unless they've changed the length of the dipstick tube for some reason it would. Can't imagine why they'd do that.
HersheyThread starternortheast · Feb 4, 2010#3
huh ?
Yaris HiltonBristol, Tennessee, USA · Feb 4, 2010#4
He's posted a response to that discussion elsewhere about double clutching, in the wrong thread.
Sort of a missed shift.
Kaotic LazagnaCentral Valley, CA · Feb 4, 2010#5
Don't think a metal dipstick is going to make any difference.
Yaris HiltonBristol, Tennessee, USA · Feb 4, 2010#6
You could buy some oil that'll stick to your dipstick. 😁
GeneralDon7Frederick, MD · Feb 4, 2010#7
Originally Posted by Hershey ↑
that when using a synthetic that it doesn't like to adhere to the metal dip stick for a proper reading . I keep the dipstick so the dots face towards the engine for a good read . Any of you have that issue ? The synthetic would hold to the yellow dipstick of the '08 YARIS H.B. much better for a reading level . Wonder if I could get one from parts department to replace the metal one . Would the yellow plastic dipstick work with the YARIS sedan as well ? 🤷
So is he saying a metal dipstick would work better or worse? Cause I thought the yaris came with a yellow plastic one?, at least my sedan did, and I use synthetic and it doesnt seem to have a problem sticking to it.
HersheyThread starternortheast · Feb 4, 2010#8
think I'll STICK with the synthetic 😉 . Yes , the syn fill is easier to read with the plastic dipstick . That was the case with the '08 L.B.. The '08 sedan and 2010 3 door came with a metal dipstick . The 1st generation XB came with the yellow dipstick too .
1stToyotaOklahoma · Feb 5, 2010#9
Originally Posted by Hershey ↑
think I'll STICK with the synthetic 😉 . Yes , the syn fill is easier to read with the plastic dipstick . That was the case with the '08 L.B.. The '08 sedan and 2010 3 door came with a metal dipstick . The 1st generation XB came with the yellow dipstick too .
My '08 LB came w/ a metal dipstick and does not give a very clear reading.
Yaris HiltonBristol, Tennessee, USA · Feb 5, 2010#10
Is your avatar picture Nancy Pelosi?
HersheyThread starternortheast · Feb 5, 2010#11
Originally Posted by 1stToyota ↑
My '08 LB came w/ a metal dipstick and does not give a very clear reading.
does it read a little lower on one side than the other ?
GeneralDon7Frederick, MD · Feb 5, 2010#12
hmmm glad i got the 07 model sedan then😁
1stToyotaOklahoma · Feb 5, 2010#13
Originally Posted by Yaris Hilton ↑
Is your avatar picture Nancy Pelosi?
Yes, and she sure is pretty. 😳
1stToyotaOklahoma · Feb 5, 2010#14
Originally Posted by Hershey ↑
does it read a little lower on one side than the other ?
Yes, not equal, and messy. Engine has to be cold and sitting for a while before I can get a non-messed good reading.
DerFlosserUSA · Feb 5, 2010#15
agreed with the messy reading. Really have never had this problem on any of my other current or past cars but this car, it's kind of frustrating trying to read the oil. Even moreso when clean (just changed). My neighbor has the same problem with his '08
HersheyThread starternortheast · Feb 5, 2010#16
yup , usually check it following morning . Is a nuisance having to recheck it 2 > 3 times to be sure of oil level . .
yaris-meAnaheim, CA · Feb 6, 2010#17
Originally Posted by 1stToyota ↑
Yes, and she sure is pretty. 😳
🤣It must be love.😆
TOUGEghostKauai · Feb 6, 2010#18
Scuff up the bottom of the metal dipstick with a small file to make the oil stick to it a little better and make it easier to read.
auxmikeLI, New Yawk · Feb 6, 2010#19
My dipstick has a yellow plastic top with a lenght of metal to measure the level. It's not all plastic.
Also, it's awful trying to read the level. I too let it sit overnight , then I can see where it is.🤷
auxmikeLI, New Yawk · Feb 6, 2010#20
Originally Posted by TOUGEghost ↑
Scuff up the bottom of the metal dipstick with a small file to make the oil stick to it a little better and make it easier to read.
Will sandpaper be as good?
Yaris HiltonBristol, Tennessee, USA · Feb 7, 2010#21
If you get all the sand off of the stick when you're done.
HersheyThread starternortheast · Jun 26, 2010#22
since stopping the use of SHELL 5w-30 synthetic to SHELL conventional 5w-30 the oil adheres to both metal dipsticks for a better reading .