Yarisworld Archive

Klann Tools Oil Filter Wrench..

7 posts · 8,345 views

DARK AGE 53Original postAlabama · Jan 27, 2010#1
I just wanted to say the Klann Tools KLA0-122-308 oil filter wrench is awesome, this wrench is a perfect fit for our filters.

Later,
Al
KLA0122-308-2.jpg

Replies 6

ParmasML · Jan 28, 2010#2
Interesting tool for full time oil changers...
MUSKOKA800Chatham, Ontario, Canada · Jan 28, 2010#3
Originally Posted by Parmas ↑
Interesting tool for full time oil changers...
Why, a plastic version is available here for $6.00 at CTC. They're available in three sizes.
I have three. One for each of our 2 vehicles and another from a vehicle gone by.
Works well for the Yaris as the filter is difficult to grip being somewhat recessed alongside the crankcase.
Doc ZaiusOttawa, ON, Canada · Jan 28, 2010#4
^^^ I find my Canadian Tire plastic filter wrench slips. Especially once it gets a little bit of oil on it (inevitable). Pretty sure I got the smallest size. Anyhow, I find putting a rubber glove between the wrench and the filter gives me the grip to seat the filter properly. 👍
DARK AGE 53Thread starterAlabama · Jan 28, 2010#5
Originally Posted by Doc Zaius ↑
I find putting a rubber glove between the wrench and the filter gives me the grip to seat the filter properly.
The Klann wrench cost more but I figure it's a lifetime investment, no slipping or rubber glove needed also. JMO
MUSKOKA800Chatham, Ontario, Canada · Feb 1, 2010#6
Originally Posted by Doc Zaius ↑
^^^ I find my Canadian Tire plastic filter wrench slips. Especially once it gets a little bit of oil on it (inevitable). Pretty sure I got the smallest size. Anyhow, I find putting a rubber glove between the wrench and the filter gives me the grip to seat the filter properly. 👍
Interesting,
Mine fit so tight that I often have a fight to get the old oily filter out of it. Draining then beating the filter several times around it's base perimeter is the found solution.
Doc ZaiusOttawa, ON, Canada · Feb 1, 2010#7
Originally Posted by MUSKOKA800 ↑
Interesting,
Mine fit so tight that I often have a fight to get the old oily filter out of it. Draining then beating the filter several times around it's base perimeter is the found solution.
Probably due to the filters we use...? Slightly different grips on them. I use Napa Gold.