Yarisworld Archive

Custom exhaust

23 posts · 6,318 views

YodaOriginal postFL · Jan 18, 2010#1
I am getting my exhaust done tomorrow😁 Few questions...
1) what pipe size? 2.5"...2.25"...2"?
2) should it be from the resonator, catalytic, or try to do header(not to excited about this one) all the way back
3) what kind a diff in whp are we talking about for crushed bent vs mandrel. I dont think it will make more than 2 whp diff at the most....🤷

will get some pics and my new dyno

Replies 22

supmetSouthern California · Jan 18, 2010#2
1) search, tons of threads on this, iirc 2.5 and 2.25 are for boost mostly
2) if you're going custom might as well do header back
3) your talking 2 whp total if your lucky, if you only lose one from crush bending that's half the power you were gonna make.
thebarberGrand Rapids, MI · Jan 18, 2010#3
just do 2" mandrel bent from the back of the resonator to the back of the car

keep the stock cat and resonator as they're 2" thru....

i replaced my res-back w/ aftermarket and got a nice bump in hp/tq. any larger and you risk losing too much bottom-end power
YodaThread starterFL · Jan 18, 2010#4
did my search just making sure. didn't want to fudge it up.😳
its gonna cost $300 from the res... Sounds like a good price to me...
aucoriumSouth Africa · Jan 19, 2010#5
i recon a decat should make a diff on our cars
thebarberGrand Rapids, MI · Jan 19, 2010#6
Originally Posted by aucorium ↑
i recon a decat should make a diff on our cars
i doubt it

from dyno's i've seen of other cars, removing the cat only gives 1-2whp....and thats on an engine with more displacement than a yaris
jaytownCosta Mesa, CA · Jan 19, 2010#7
Let us know how it turns out.
aucoriumSouth Africa · Jan 19, 2010#8
yeah , i'll def let you guys know how it goes with a decat , i recon it could yield some more power , i mean the Renault clio sport gets quite a few horses from a decat
JerkrattFair Lawn, NJ · Jan 19, 2010#9
i got 3.1 hp gain when i did my two dyno pulles... the first i had 17x7 motegies and dc sports header stock mid pipe greddy axle back vs 15x6.5 konigs and original nitto mid-pipe

i have to try and get to the place in south jersey and get them to print the 2 out so i can scan them i think it was 105 vs 108.1 or something like that i gotta get unlazy and drive down there.
YodaThread starterFL · Jan 19, 2010#10
so it was $70 to get it crush bent.... I went with the $300 mandrel bent 2.25".
aucoriumSouth Africa · Jan 20, 2010#11
ok , so the decat gained you about 3 BHP ? i suppose flow and rev response was a bit better aswell ?
ArkhangelPuerto Rico · Jan 20, 2010#12
So Stock pipe is 2"?
1.5Tampa · Jan 20, 2010#13
I would go 2-2.25 mandrel bent from the header back. Ive always thought about going catless but I heard it can actually ruin the engine. So I guess i would just replace stock with a high-flow racing cat.
YodaThread starterFL · Jan 20, 2010#14
well this is the first step :) i want to do some testing then i will see if i will do from the header.
thebarberGrand Rapids, MI · Jan 20, 2010#15
Originally Posted by Arkhangel ↑
So Stock pipe is 2"?
2" from the header thru the resonator and it shrinks to 1.75" AFTER the resonator to the back of the car
YodaThread starterFL · Jan 21, 2010#16
some random pics uploaded from my phone

3 attachments not included in this copy

1.5Tampa · Jan 21, 2010#17
SICK!
advocatelocation · Jan 22, 2010#18
Looks amazing Yoda! Great job!
YodaThread starterFL · Jan 22, 2010#19
thx gonna get it dyno cause it dont feel any different lol. my butt dyno is strange
cali yarisCanoga Park, CA · Jan 22, 2010#20
my butt dyno is strange
TMI
Doc ZaiusOttawa, ON, Canada · Jan 22, 2010#21
^^^ lol

Any stats/pics of the muffler and/or tip of your setup?
YodaThread starterFL · Jan 22, 2010#22
Originally Posted by Doc Zaius ↑
^^^ lol

Any stats/pics of the muffler and/or tip of your setup?
its the trd axle back.
YodaThread starterFL · Jan 22, 2010#23
just got it dyno gained 3whp. but since i took off the tb i lost 3. so i am at the same whp that i had with the tb. will upload it when i get home. no wonder i felt no change