Yarisworld Archive

THE BEST AUDIO SPEAKER

59 posts · 16,765 views · page 1 of 2

phenoyz77Original postvegas · Jan 13, 2010#1
can anybody give their opinion on the "BEST CAR" audio/amp/wire/speakers etc..(but affordable) products out in the market today....planning to upgrade my sound system..need some opiinion
thx...Happy New Year 🙂


__________________________________________________ _______________________

http://www.lifeline-mts.com/index.htm

Replies 58

The ArchitectFL · Jan 13, 2010#2
budget?
IllusionXBrossard, QC · Jan 13, 2010#5
Originally Posted by phenoyz77 ↑
can anybody give their opinion on the "BEST CAR" audio/amp/wire/speakers etc..
products out in the market today....planning to upgrade my sound system..need some opiinion
thx...Happy New Year 🙂
The best can easily set you back 20k, 50k, 70K or 100k $$$ easily.
The ArchitectFL · Jan 13, 2010#6
opinions can get preeeetty expensive lol
sqcompBack at home · Jan 13, 2010#7
If this was ever a loaded question!

Everything you're going to get is purely subjective. Ford is better than Chevy type opinion.

As was mentioned before, what is your budget?
talnlnkySpokane, Wa · Jan 13, 2010#8
Originally Posted by The Architect ↑
opinions can get preeeetty expensive lol
yep, and change from person to person a lot too.

I personally think that when it comes to power cable... that the best stuff you can get isn't the fancy car audio cable... but rather the cheaper welding cable that you can find at any welding supply store.

some people like the fancy wire because it has a million and three strands, but really all that does is make it more flexible... My take, on it is that as long as you have thousands of strands three isn't a DC electric difference... also, cable that is the thickness of your thumb is not going to be very flexible no matter what the strand count... no way around it. Welding cable comes with one with more layer of protection in the form of a paper jacket, and it is UL certified, can withstand oil, gas, and extreme temperatures which not all fancy car audio cable can.

with that said... most people would disagree with me.

recently there seems to be a Knu-boner going on round here.
goku87AK · Jan 13, 2010#9
Originally Posted by talnlnky ↑
some people like the fancy wire because it has a million and three strands, but really all that does is make it more flexible... My take, on it is that as long as you have thousands of strands three isn't a DC electric difference... also, cable that is the thickness of your thumb is not going to be very flexible no matter what the strand count... no way around it.
higher strand # helps reduce eddy currents, as minimal as they may be.

Originally Posted by talnlnky ↑
recently there seems to be a Knu-boner going on round here.
It's sexy and cheap lol.
The ArchitectFL · Jan 13, 2010#10
Originally Posted by goku87 ↑
higher strand # helps reduce eddy currents, as minimal as they may be.



It's sexy and cheap lol.
and gets the job done...cant really go leaving that one out. just bc somethings sexy and cheap doesn't mean its safe....cough.
talnlnkySpokane, Wa · Jan 13, 2010#11
Originally Posted by goku87 ↑
higher strand # helps reduce eddy currents, as minimal as they may be.



It's sexy and cheap lol.
not sure how eddy currents are involved as that is talking about magnetic fields... maybe you are thinking about the "skin effect".

Skin effect is straight up propaganda... at the amperage levels you are talking about, the entire conductor is saturated regardless of strand count.

Would love to see the results of resistance test on 15ft of 1/0awg car audio cable vs that of 1/0awg welding cable... It'd take some might expensive equipment to measure any difference from the two electrically... and who knows, the welding cable might just win. Like I said... welding cable is UL certified, it actually has to meet standards.


Cheap? Car audio wire is usually 50% to 100% more than welding cable of the same awg. The real reason you buy it is cause it's sexy.
The ArchitectFL · Jan 13, 2010#12
I think he mean't cheap in the car audio world compared to monster, shok, kicker, RF etc.

Welding wire is damn cheap if you go to the right place...hell even if you dont.
phenoyz77Thread startervegas · Jan 13, 2010#13
I am looking for an AFFORDABLE --- DESCENT SOUNDING car speaker / amplifier
I'm in a budget, nothing over $1,000,
I used to read CAR AUDIO & ELECTRONICS magazine, but i think its no longer being publish...

(Off-topic= any site suggestion to DL mp3)


__________________________________________________ _______________________

http://www.lifeline-mts.com/index.htm
The ArchitectFL · Jan 13, 2010#14
well for the yaris a grand is a lot to work with...maybe.

Do you want just a subwoofer, box, amplifier & wire kit or do you also want a new CD player and door speakers?
phenoyz77Thread startervegas · Jan 13, 2010#15
well for the yaris a grand is a lot to work with...maybe.

Do you want just a subwoofer, box, amplifier & wire kit or do you also want a new CD player and door speakers?



i want a sub/ amp/ and descent component speaker
i'm using my mp3 for audio/video...alas the upgrade 🙂
(FRY"S is a little expensive dunno why...)
The ArchitectFL · Jan 13, 2010#16
do you mind buying online.
severous01SE Texas · Jan 13, 2010#17
polk audio for speakers.

kenwood head units (extreme reliability, decent looks, plenty of power, and awesome options for the price)

pioneer or kenwood amps (again with the power/price issue.) higher quality amps only for higher end only. you dont need a class a amp for subs...and a class d amp for highs would suck bad. memphis class d amps are good for subs, and they're really tiny.

subs...this is left to question...a lot of people think that hi power handling is best, or poly material is best...or the most expensive is the best...whatever. i know people who have matched the sound records with a perfectly built box, a $30 amp, and buy one get one $20 subs. 4 amps, 8 subs, and a box matched perfectly to the subs.
goku87AK · Jan 13, 2010#18
Originally Posted by talnlnky ↑
not sure how eddy currents are involved as that is talking about magnetic fields... maybe you are thinking about the "skin effect".

Skin effect is straight up propaganda... at the amperage levels you are talking about, the entire conductor is saturated regardless of strand count.
The separate conductors act similar the laminated cores of transformers to help prevent eddy currents.

http://en.wikipedia.org/wiki/Transformer#Cores

As for skin effect, it is a very real thing, I promise. We use air/foam core cables at work because it helps eliminate it. The skin effect only starts happening at much higher frequencies than audio, so unless someone is using power cable to transmit RF, skin effect isn't going to be happening on the power cable.
phenoyz77Thread startervegas · Jan 14, 2010#19
Originally Posted by severous01 ↑
polk audio for speakers.

kenwood head units (extreme reliability, decent looks, plenty of power, and awesome options for the price)

pioneer or kenwood amps (again with the power/price issue.) higher quality amps only for higher end only. you dont need a class a amp for subs...and a class d amp for highs would suck bad. memphis class d amps are good for subs, and they're really tiny.

subs...this is left to question...a lot of people think that hi power handling is best, or poly material is best...or the most expensive is the best...whatever. i know people who have matched the sound records with a perfectly built box, a $30 amp, and buy one get one $20 subs. 4 amps, 8 subs, and a box matched perfectly to the subs.


thanks...
bzinn 1University Place,WA · Jan 14, 2010#20
Ok well we got a budget of $1000.....you can do a lot with that.

There are several things needed to make a good sounding system

1.good deck
2.good wires
3.sound deadening
4.good comps
5.good subs and box
6. good amps

You did not mention about a deck,jsut subs,comps and amp so I assume you got a decent aftermarket deck.

As for subs.....there are alot of directions,you said sounds good so I assume SQ over SPL(loud).

there are subs you can get the best of both worlds in your budget.

Some brands I use are Elemental Designs and Image Dynamics,both make SQ subs,and both make subs that go freaking loud.

Amps.......that is a direction that is hard to work with......Elemental Designs makes some of the best amps I have used,they are rated lower on output than what they bench test for,for instance the NINe.1 says 1000w at 1 ohm.....it benches at around 1300+ and is hard to clip.

they also have amps that run 4 or 2 chanels,the 2 channel puts out 600w which is loud and it will actually push about 700+ without clipping.

Comps......first thing.......focus on front speakers,forget even needing rear speakers,they are not needed and actually can cause the sounds in the car to sound worse.

Focal is a great brand,I have used them and the sond is great,cost is spendy for them though,Seas makes great tweeters,and Image Dynamics makes great comps that are not budget breaking,Elemental Designs also makes great comps,they are loud,clean, and take the power,tweeters are a bit harsh though,and most times need ran with the + and - swapped to tone them down a bit.

Sound deadening is a big part of a stereo,keeping the sound in the car is important,keeping noise out of car is important.and changes the sound of a system dramatically........

Sub boxes areanother big issue to think about,sealed or ported,ported tend to go lower and louder,but take up a lot of room,we have small car,so sealed seems a better choice......

Also how many watts you want to push is important,subs and comps need to match up output wise as best you can.

For instance my comps get 120w each and my subs get 300w each in my tC......the bass is clean,loud,and you can feel it.the comps kinda over power the subs though depending on what type of music i am playing.

The setup I was thinking of doing in my Yaris is going to be fairly simple since I have parts laying around from my last build.

I am gonna power up a set of Elemental Designs comps with 120w each,a set of seas tweeters replacing the ED tweeters
An image dynamics 10"sub in a sealed box,most likely powered with about 400w.Then several hundred of feet of deadening,and an Alpine deck,amps are gonna be ED amps as i have them laying around from another build.

Another thing to consider is do you want your system to grow in time,dont waste money on a 200w amp when for $40 more you can get a 600w amp.....that way as your needs change and they will you can upgrade subs and comps and not have to blow more money than needed.

Also learning how to tune an amp is number one,if it is clipping signal your output will not be good no matter how hard youtry,there are lots of sites to learn how to tune and I even can give basic instructions on how to do it......very easy

When tuned you can push the amps and subs and comps to their limits and they will not break and will last forever......

Also for wires.......Knukonceptz has great wires.....some of the best.
talnlnkySpokane, Wa · Jan 14, 2010#21
here's the breakdown I'd give you... you said $1,000 total

1 pair of 6.5 Components = $200-300
1 10" sub = $50-150
1 deck = $200
1 4 channel amp (aim for 75x4 to 100x4 rms rating) = $300
4awg or 1/0 power cable plus speaker wire, fuses, RCA's = $125
1 box for your sub... $75, you can build your own, or buy one... or might be able to get a shop to build one for you... tho it'd be a simple sealed box if they made it for you ... and for only $75... shops like to charge an arm & a leg for box building.

thats your $1000

www.ikesound.com often has some good deals, but be careful of the poorly built brands like pyramid, boss, crunch, and so on. Just for refrence, a 4 channel amp like you'd look for should have at least 50amps worth in fuses. If it doesn't, then you know it won't be putting out as much power as it claims.

If you buy locally, then you'll have a hard time fitting what you want into a $1,000 budget.... $2,000 would be more reasonable, especially if you don't plan to do your own install work.

Basically... you want an amp that does say 75x4 @4ohm or 300x2 @ 4ohm. You would hook the components up to two channels of 75w, and then hook up the sub to the last two channels, but bridge them so the sub would get 300w. You pretty much turn a 4 channel amp into a 3 channel amp. 1 amp helps reduce the amount of wire you need, and is more efficient on the electrical system.

As for components.... any speaker in the $100-200 range will be decent. For deck... pick whatever feels natural to you.

For sub, high powered subs are less efficient (usually) which means unless you have a big amp it won't actually get louder. However, they (usually) work in smaller boxes. Often times people buy high power capable subs, and don't have a big enough amplifier (or electrical system) to justify the sub... and for hundreds of dollars less could be louder with a smaller amp, cheaper sub, and a bigger box.

I'm a fan of going with a single 10" sub with say 300watts in a sealed box... if that doesn't cut it for you.... learn about designing ported boxes and build one.... that'll give you much more low end bass. The bigger the sub, the bigger the box gets... and its basically exponential. I always ran 12's or 8's.... 15's are cool, but just require too big of boxes. Anything a 15 can do an set of three or four 8's can do in half the space if installed properly.
sqcompBack at home · Jan 14, 2010#22
Yeah...I think I'll second Taln's idea about budget.

I did the system in my wife's Tacoma over my leave. I put a two way component set in, a ReQ, a five channel amp, and a single woofer in a custom enclosure.

It cost me around $750. With the HIDs I installed on the truck that was around $1000.

The only labor I was charged was for the HIDs.

Akk! There's more to say but chow time calls...
phenoyz77Thread startervegas · Jan 14, 2010#23
i'm using the factory head unit, it already has aux for mp3 player...

my upgrade would be the speaker/ AMP/ rear-sub/and descent quality
wirings...will look for a shop w/reasonable price for the install...
talnlnkySpokane, Wa · Jan 15, 2010#24
Originally Posted by phenoyz77 ↑
i'm using the factory head unit, it already has aux for mp3 player...

my upgrade would be the speaker/ AMP/ rear-sub/and descent quality
wirings...will look for a shop w/reasonable price for the install...
in that case... expect to spend $300 on install & random material costs (wires, cables, connectors).
so your budget is actually close to $700 for your speakers, sub & amp. If I were you, i'd put $500 of that into the speakers & amp... and only $200 into the sub and box. Amps in stores are usually spendy. Don't forget that you'll have to spend some money to get a decent quality LOC since you are using the stock deck. Don't let them sell you on a $200-300 unit like the Fosgate 360 or the JL cleansweep.. tho they are awesome units... they would basically eat up your budget to the point that you would be able to afford a sub, or would end up with crappy speakers.
phenoyz77Thread startervegas · Jan 15, 2010#25
Originally Posted by talnlnky ↑
in that case... expect to spend $300 on install & random material costs (wires, cables, connectors).
so your budget is actually close to $700 for your speakers, sub & amp. If I were you, i'd put $500 of that into the speakers & amp... and only $200 into the sub and box. Amps in stores are usually spendy. Don't forget that you'll have to spend some money to get a decent quality LOC since you are using the stock deck. Don't let them sell you on a $200-300 unit like the Fosgate 360 or the JL cleansweep.. tho they are awesome units... they would basically eat up your budget to the point that you would be able to afford a sub, or would end up with crappy speakers.

thanks...whats LOC? i have a bsetbuy/frys card no interst for 1 yr
another question is if i have the new speakers/AMP/Sub installed
would it affect, maybe damage my mp3 player if i use it constantly thru the mp3 aux?
thanks
sqcompBack at home · Jan 15, 2010#27
...AHEM...

That's whre the ReQ comes in. It's right in between the expensive fluff units and the basic crap boxes.

I have hands on experience with the ReQ and it works very well.
o2cavyssTexas · Jan 16, 2010#28
When you guys talk about the rear speakers being insignificant, does that apply to the sedans too or just the hatchbacks?
sqcompBack at home · Jan 16, 2010#29
There are some of us that particularly enjoy a stereo signal. There are some here that like to feel like they'e IN the music.

Personally, I watch and listen to concerts from the audience. The only sound coming from behind me is the ambiance of the venue.

besides, two IDQ 12s off an ID Q 1200.1 have the need to come through the rear 6 x 9 slots.
talnlnkySpokane, Wa · Jan 16, 2010#30
Originally Posted by o2cavyss ↑
When you guys talk about the rear speakers being insignificant, does that apply to the sedans too or just the hatchbacks?
it applies to any audio setup, car, home, wherever in which you are listening to music that was recorded in stereo (2.1) and not a multichannel format like 4.1/5.1/6.1/7.1.

by adding more speakers than the music was recorded with in mind, you change the way the music will sound. The idea is to hear EXACTLY what the musician was playing.
Alien MantisArizona · Jan 16, 2010#31
I like my music to fill the room / car all around me, coming at me from different angles, even if it is not a "true surround" source signal.

If I can close my eyes, and tell the music is coming from a single direction, then it's a FAIL.

I do however, like everything to be somewhat balanced. If the rear deck speakers overpower the fronts, then that is a FAIL.

The bass should definitely be non-directional, and all around you.

The problem with car audio is: you never sit in the MIDDLE of the car.
You are either up-front on one side driving, or the other side riding.
Or you are a passenger in the back on one side or the other.
So you are never really "center-axis" in a car.
The good news is, you crank it up loud enough, the car is small enough that no matter where you are in the car, the music will be all around you regardless.

Just my opinion, YMMV.

😁
goku87AK · Jan 16, 2010#32
I used to like the sound all around, but I think my taste is slowly changing, probably due to the set-up I have in my apartment lol.

@ talnlnky:
What do you think about the Focal K2 speakers? You always preach about spending more money on speakers rather than the sub, and I was just curious as to your thoughts of some of those speaker sets costing > $2000 retail.
Alien MantisArizona · Jan 16, 2010#33
Originally Posted by goku87 ↑
What do you think about the Focal K2 speakers? You always preach about spending more money on speakers rather than the sub, and I was just curious as to your thoughts of some of those speaker sets costing > $2000 retail.
I know this wasn't directed at me.... but I can't pass this one up.

FOCAL IS SO OVERPRICED I WANNA THROW ROTTEN FRUIT AT THEM !!!

How they think they can charge what they charge for that crap is beyond me.
It's like me charging $100 for a PENCIL.
Maybe it is an oak pencil, with really smooth graphite, and a nice eraser.
But it will never be worth $100.

FOCAL is a JOKE.

Kinda like KLIPSCH. So overpriced for what you get. BOSE is another one.
POLK used to be overpriced, but you can get their stuff WAY cheaper now, so if you catch it on sale with free shipping, it's okay.

🤘
Mobius1Indianapolis, IN · Jan 16, 2010#34
Alien mantis, you need to sit in a true SQ car and i promise your opinions will change. There is nothing cooler than being able to close your eyes(in such a car) and hearing the music in all its rich and vibrant detail. With eyes still closed you could swear that the music is being played out in front of you, not being able to pinpoint where the speakers are in the car, sounding as if it was coming out of the windshield. If its a truly awesome system you can even hear a difference between where the instruments are being played on stage(with the proper music anyway).

Back to the original question asked: If you are not doing the install yourself just shop around to local shops and do a lot of listening and get what u can afford and like. It will save you a lot of hassle if you ever have any problems with anything if u just buy the equipment and have it installed at the same place.
xen555Puerto Rico · Jan 16, 2010#35
http://onlinecarstereo.com/CarAudio/...e_SPR-17S.aspx

that will be my choice if you are looking for fidelity i have those in my last car and i love how they sound and those guy in onlinecarstereo have everything u need and they have really good prices!!
Alien MantisArizona · Jan 16, 2010#36
Originally Posted by Mobius1 ↑
Alien mantis, you need to sit in a true SQ car and i promise your opinions will change. If its a truly awesome system you can even hear a difference between where the instruments are being played on stage(with the proper music anyway).
I know what you mean.
I have experienced this several years ago.
This guy I knew was a manager at our local stereo shop. He used his car as an audio demonstrator for some of the products they sold. At the time, they were heavy into Clarion, Planet Audio, and Earthquake stuff. So he had all the top-of-the-line Clarion, Planet Audio, and Earthquake stuff in this car. Lots of Dynamat everywhere too. I remember he had four 10" subs in this thing, and they had such a tight hard hit, I couldn't believe the windows weren't breaking in this car. I have never heard anything like it before, or since.
The music was crystal clear across the whole spectrum, and the farther you cranked the volume, the louder it got while staying perfectly clean. I estimated he had around $7,000 worth of gear in this car, which was a fortune at the time. ( Early 1990's ). He didn't get to keep all the stuff, the shop was loaning most of it to him. Kinda sad though, he would play this thing for customers, then they were ruined for life. Once you have heard that, you know what can be done, and it's hard to be satisfied with a "mediocre" system.
They built custom speaker kickpanels for this car, loaded with top-end component stuff. I think it had two Earthquake amps, and maybe one or two Planet Audio amps in it, but I don't remember. I was shocked because it sounded like it had 20 amps in it. The thing that impressed me the most was, in spite of it being louder than humans can survive, it was crystal clean. I never heard that in ANY system before. The louder you get, the dirtier you are supposed to get. Not this system.
Technology has come a long way since then, but I still haven't heard a system that sounds better than that system did. I'm sure they exist, but I ask myself, what is the point?

I have a good home audio system, and a really nice surround sound system for my home theater setup, but I never could justify spending thousands of dollars on CAR AUDIO. It bakes in the sun out here where I live, and thieves steal that stuff. So I never saw the point in wasting my money. I will spend a few hundred bucks to make it sound acceptable, but beyond that, it's good enough for me. I love a SQ comp car system, but I will never do one for myself. I prefer to relax at home with a cold beer and listen to my good audio system in my house.

😁
Alien MantisArizona · Jan 16, 2010#37
And while we are still on this subject:

FOCAL "Utopia Be" has got to be the most overpriced stuff I ever seen.

What some people fail to understand is, there are only so many ways/materials you can build a speaker/amp/crossover with. Once you use the very best materials and engineering, where do you go from there?

Is that $1,500 FOCAL sub going to play so much nicer than a JL W7 ?
Nah. Maybe slightly different, and in some cases, the JL might sound better. We all know so many other factors come into play when dealing with this stuff. So once you have good components and amps, it's the acoustics of the vehicle and other installation factors that will make the difference. Besides, it's all subjective. What sounds really good to one person, might not sound as good to the next person.
Sound is "art", and as with all "art", you got your "art snobs".

Do you really want to spend $4,000 on 1 set of component speakers when you can spend $2,000 on the whole car and make it sound like the sky is falling? At what point does it just become "spending money for the sake of spending money"?
Do you like bragging to other people that you spent $20,000 on your car stereo system?

Take your car to Will Castro at Unique Whips and let him LACE OUT THAT WHIP! REMY will tune that shit up for ya!

lol

😆
talnlnkySpokane, Wa · Jan 16, 2010#38
Originally Posted by goku87 ↑
I used to like the sound all around, but I think my taste is slowly changing, probably due to the set-up I have in my apartment lol.

@ talnlnky:
What do you think about the Focal K2 speakers? You always preach about spending more money on speakers rather than the sub, and I was just curious as to your thoughts of some of those speaker sets costing > $2000 retail.
i've heard a few focals, but not many in an actual car. I can't really comment on them other than I remember the tweets being a bit harsh for my ears... one of the drawbacks of the metallic tweeters (need a lot of attenuation for me to like them).

I'm a big fan of a 6-7" mid that has a large linear stroke and the ability to play down low with authority. The reason I like this is because I want my mids to blend smoothly with my sub so I don't have 60hz playing at 100dB and 100hz playing at 80dB.

To be honest, I think to get the nice smooth transition is almost easier to go with a 3 way setup + sub using some components and then a midbass driver. Currently i'm hanging onto two pairs of midbass drivers for my ride. One is a 8" with 12mm x-max, the other is a 6.5" with 13mm x-max. I'd like to install the 8's, but being a 5spd, not sure I have the foot room to make kick pods, or the mounting dept in the door. My mids are actually home theater drivers that play 100hz to 15khz, lil 4.5" mids with something like 4-5mm x-max.

just about all component sets i've seen sold in stores leave me wanting more midbass.... I love the warm feeling you get when you have a very strong 80-150hz region.
talnlnkySpokane, Wa · Jan 16, 2010#39
Originally Posted by Alien Mantis ↑
Technology has come a long way since then, but I still haven't heard a system that sounds better than that system did. I'm sure they exist, but I ask myself, what is the point?
with the exception of DVD/MP3 decks, and Class D amps there really hasn't been much improvement in the electronics side of audio... As for speakers... the only thing that's happened is a few new motor topologies which have done wonders at reducing distortion on high excursion subs... but the speakers that use that technology are very few and far between.
Mobius1Indianapolis, IN · Jan 16, 2010#40
I know what u mean alien mantis. The system in my yaris is great and extremely acurate but it's missing that killer soundstage. My shop demo car is a ten grand system, it sounds incredible and it also makes me a picky bastard ;)
sqcompBack at home · Jan 16, 2010#41
I was just writing a book on the costs of nice systems...this damned website timed me out!

I'll summarize. Mobius' statement on the cost being around $10K is correct. On my Yaris, I have $5650 invested into just the equipment. I've set aside around $6000 for install and other minor costs.

I remind you as well..I'm doing most of the install!!!

The cost for the system is in the details. To make a "sky is falling" sound doesn't cost that much. It's the control of said system that costs the big bucks (equipment wise). Why am I spending so much? Because I need a well planned, bulletproof, well engineered system. I'm not slapping in a saturday night special. An amplifier, cheap source, and a couple speakers...not on your life. I've been there and done that.

My money is being spent on the great equipment and more importantly meticulous install. We're talking spending money to be able to walk onto the IASCA SQi and SQc rookie classes and have a serious contender.

To put a cap on it, I've budgeted $11,640 for this system...not including dress up items that I'd get from Toyota or Micro Image. Honestly! You should see the equipment pile in the back of the shop with my name on it. The shop is going to be doing the alarm install on the car over the next few weeks. I've got to cut time off this project by having work done while I'm over here in the sandbox. I've got to be standing up with this by early June...
sqcompBack at home · Jan 16, 2010#42
Also, when Mobius say's he's picky...I know exactly what he mens. My first (and only "official") job in the industry was at the only high end car audio shop at the time in our state. I'm talking Focal, Dynaudio, McIntosh, Symphoni, Zapco, PG (pre Ronin), Alpine F#1...

I was cursed with extremely picky tastes after that. My wife's Tacoma is a "saturday night special" like I referenced. One amplifier, a nice ReQ, a small sub, and two way components. The most time was put into the woofer enclosure and tuning. It sounds great. It wows her, and that's what matters. I really like that 8" ID sub, it's a punchy little speaker.

...it can sound better though...

That mid bass needs to be dedicated...

I won't touch it though, I've got a bigger project in "FrankenYaris" to deal with.
goku87AK · Jan 17, 2010#43
lol, "frankenyaris." i expect loads of pics.
Alien MantisArizona · Jan 17, 2010#44
talnlnky: great point about the mid-bass. I agree. 8's are great for that. Nice to send the exact freq's to the right driver. Always better than forcing one driver to handle a wider range than it should.

moebius: I use to envy and want those high-end systems in my car, but not so much anymore. I see the downside to all of it, and it isn't worth the expense and hassle to me anymore. Good enough is good enough. There has to be a stopping point. You can drive yourself crazy constantly upgrading to the next incremental level.

sqcomp: you are obviously doing your system for competition, so I would expect you to put as much into it as you possibly can. It sounds like a serious hobby/side-job for you. Nothing wrong with that. Everyone has their hobbies. My problem is I have too many hobbies. I don't need another one!

Fun to read all the posts here, see what you guys are doing with the Yaris.
goku87AK · Jan 17, 2010#45
Originally Posted by Alien Mantis ↑
Fun to read all the posts here, see what you guys are doing with the Yaris.
I had what I think was a decent system lined up ... even had the subs purchased ... then my Yaris was destroyed lol.
sqcompBack at home · Jan 17, 2010#46
AM...

Taln's love for the midbass is well founded. Mine is an 8.5" (yes it WILL fit in the doors)...I loke the idea of seperating the speakers to have them work a dedicated range. The three way setup comes in very handy when you're listening to an advanced track that has many sources of sound (i.e. an orchestra). The less frequencies each speaker has to handle, the better.
pennyracergrants pass · Jan 17, 2010#47
we all think a bit different im sure . i dont think focal is junk but a bit pricey i have a set of 3 ways in my yaris hb i do like them !!! shit you could play the speaker game all day im sure this thread should run for ever im sure :) 🎉







Originally Posted by Mobius1 ↑
I know what u mean alien mantis. The system in my yaris is great and extremely acurate but it's missing that killer soundstage. My shop demo car is a ten grand system, it sounds incredible and it also makes me a picky bastard ;)
talnlnkySpokane, Wa · Jan 17, 2010#48
Originally Posted by sqcomp ↑
AM...

Taln's love for the midbass is well founded. Mine is an 8.5" (yes it WILL fit in the doors)...I loke the idea of seperating the speakers to have them work a dedicated range. The three way setup comes in very handy when you're listening to an advanced track that has many sources of sound (i.e. an orchestra). The less frequencies each speaker has to handle, the better.
see... for you.. actually doing SQ stuff... I think you'd want to limit the number of drivers you have so you can have as few point sources as possible.... reduce the rainbow effect... I mean... If you get mids that have a linear motor topology built in, you can keep yourself from having crossover points in sensative/tricky areas... the normal x-over point for a tweet being in the 2khz - 5khz range can be thrown aside... the CSS 4.5 mid i'm using can be crossed over much higher... in fact, if being played on axis, hardly even needs a tweet (up to 20khz).

If you could get your hands on a 3" mid that had a low inductance linear motor you wouldn't need a tweet, mate that with a 8" midbass and I think you could do the whole spectrum in 2 drivers.... course, it would need some eq, and wouldn't get too loud, ... but you're sq.... you people don't get loud.
sqcompBack at home · Jan 17, 2010#49
Oh hush yourself! Don't get loud? I've got plenty of headroom as well as power handling on those components. I'm gonna let those two IDQ 12's kock your socks off! LOL! It will have the ability to ge VERY loud...yet clearer than bottled water.

My crossover points are going to be something like this:

mid bass- 75 to mid 200s or 300s somewhere
midrange- 200s to something around 6K to maybe north of 10K
Tweeter- 6-10 on up

What do you think that Hybrid L4 is going to used for? Window dressing? That's the heart of the component set...and yes, I could EQ it out to get rid of the tweeter. But really...you should hear this tweeter!

http://www.hybrid-audio.com/Legatia%20L4.pdf

http://www.hybrid-audio.com/Legatia%20L1%20Pro%20SE.pdf

http://www.hybrid-audio.com/Legatia%20L8.pdf

That's the nice thing about these speakers...the ability of each one to go beyond what other speakers do and sound great while doing it. Now multiply that by three great speakers? You've got flexibility galore. I'm going to be concentrating on staging for the most accuracy and width that I can. I know the crossover points will fall into place with good tuning. I'll be paying attention to transfer function for the most part. Why? Like I said, I can make minor component movements to affect the response. The staging of these components will easily overcome location detection. I've got plenty of EQ to nudge something up or down depending on what the car and the location does to the response. The time alignment is another widow dressing as well...

I've got the Fairfield Four to demonstrate a realistic stage...along with an orchestra on tap, you're done for. So...When do I get you up to the 'Couv to put you to work on this for a few hours? The steaks, shrimp, and beer are on me.
goku87AK · Jan 17, 2010#50
Originally Posted by sqcomp ↑
What do you think that Hybrid L4 is going to used for? Window dressing? That's the heart of the component set...http://www.hybrid-audio.com/Legatia%20L4.pdf
That speaker hates life @ 93Hz, almost 20Ω