Yarisworld Archive

Air Filter

20 posts · 8,225 views

plasticskisOriginal postMA · Dec 15, 2009#1
Had anyone had an issue replacing the air filter in an 08 Yaris? I opened it up, replaced with a Fram, and could not get it closed again. It looks like the edges pinch. I looked at the old one and the edges looked pinched also. I feel like it should go in easy, what am I missing?

Thanks in advance.
Bryan

Replies 19

Yaris HiltonBristol, Tennessee, USA · Dec 15, 2009#2
I put one in the old Echo and had a devil of a time getting the box closed.
06silveryarisPuerto Rico · Dec 15, 2009#3
That airbox is tricky the first time
AlexNet0Rockland, ME · Dec 15, 2009#4
^oh yeah, I thought I had gotten the wrong filter like 3 times once.

one of them (may have been a fram) had one edge that stuck out more that was not like the original.
b_hickman11Tyler, TX · Dec 15, 2009#5
You have to make sure the left side of the box locks into the tabs and then lower the right side of the box.
R2D2ME · Dec 18, 2009#6
Another tip: place the filter in the upper half of the airbox first then bring the halves together. I found this to be much easier to avoid pinching.
TheSilkySmoothNew Hampshire · Dec 21, 2009#7
I put in a Wix, fit perfect, no problems - but I am a mechanic. The new filter seemed more restricted than the dirty one though!
UTVitzSalt Lake City · Dec 21, 2009#8
Not all corners are the same-three are rounded and one is pointed. At least the factory one is-that was the only thing I figured out that made the top go back on right. If I remember correct the pointed corner goes in the left upper corner of the air box-the corner that's the hardest to see when holding up the cover and trying to put an airfilter in at the same time.
deerebiltcheney,ks · Dec 21, 2009#9
replaced mine with oem toyota fit perfect and was cheaper than name brand at autozone
supmetSouthern California · Dec 21, 2009#10
Originally Posted by deerebilt ↑
name brand at autozone
oxymoron??

You gotta push a little more than other cars, but mine snapped back in just fine with a K&N
kingstonyariskingston nj · Dec 22, 2009#11
I could not get an after market filter to fit--box would not close
Buy OEM box will close
b_hickman11Tyler, TX · Dec 22, 2009#12
Mine closes fine with my K&N's on both Yarises
Hersheynortheast · Dec 22, 2009#13
one corner of the filter is square , this goes in the upper left hand corner of the base of the air filter box . Then keep right side of upper box at about 40 degree angle and slip tabs of cover into slots of base . This is somewhat tricky . Make sure tabs are all the way in the slots for air tight fit . Hope I explained this ok , hard to put in words . GOOD LUCK .
1stToyotaOklahoma · Dec 24, 2009#14
Originally Posted by kingstonyaris ↑
I could not get an after market filter to fit--box would not close
Buy OEM box will close
My Beck Arnley filter fit like OEM, looks like it should flow better than the OEM egg carton 😉
RedRideMiddletown, NY · Dec 24, 2009#15
Originally Posted by supmet ↑
oxymoron??

You gotta push a little more than other cars, but mine snapped back in just fine with a K&N
I had no trouble with a K&N either.
fluke_boyThe Villages, FL · Dec 25, 2009#16
Note to self: they are talking about air filter not cabin filter.
plasticskisThread starterMA · Dec 30, 2009#17
Thanks all - does the sharp corner still pinch if I put it in the back-left?
TheSilkySmoothNew Hampshire · Dec 30, 2009#18
Originally Posted by 1stToyota ↑
My Beck Arnley filter fit like OEM, looks like it should flow better than the OEM egg carton 😉
First: What does it look like, pleated paper instead of molded polyester fiber? I'm thinbking my wix, which looks like OEM doesnt flow too well - been having subtle performance issues ever since that wix air filter went in. It looked good though🤷
toyotatechontatio · Dec 30, 2009#19
i do atleast 5 yaris' a day and never have issues with aftermarket or oem.

make sure the hinges at the back are in there spot again and that the silver clips arent in the way,and you should be fine :)
GeneralDon7Frederick, MD · Dec 31, 2009#20
I havent come across that issue yet either changing mine, i use the generic brand from pepboys, I cant find the fram one that fits ours anywhere around me.