that is all
scangauge-xgauge-outside temp-works
15 posts · 9,110 views
Replies 14
That's great! Only I didn't even know it supports outside temp. I'll have to look into it.
Thats nice .. supplying us with the code .. priceless
hereOriginally Posted by WD-40 ↑Thats nice .. supplying us with the code .. priceless
http://tinyurl.com/yblyyfx
^lol
any other findings we can plug into the scanguage? :P
i'll have to try this one... i've been just using the Air Intake temp for a rough guess. Sucks that way, often times the AI is off by 10-15F compared to thermometers on bank signs.
Originally Posted by talnlnky ↑i'll have to try this one... i've been just using the Air Intake temp for a rough guess. Sucks that way, often times the AI is off by 10-15F compared to thermometers on bank signs.
yeah, air intake temp is much warmer
use the scangauge II web site, go to xgauge commands,
use CANSF ambient air. use the latest guide, and nothing that says experimental
it is dead-on accurate and takes data from the probe for the a/c unit. if you have A/C your yaris will have the temp probe. this is nice to know when you are driving in freezing rain or wet roads close to freezing.
Has anyone else tried this on a pre-2010? It doesn't work on my 09, nor on Crashy, as neither of their ECMs support the OBD PID "01 46".
yeah I have a 2010 5 door US model automaticOriginally Posted by CTScott ↑Has anyone else tried this on a pre-2010? It doesn't work on my 09, nor on Crashy, as neither of their ECMs support the OBD PID "01 46".
here is the code I loaded
Ambient Air Temperature (F)
07DF0146 04410546 2808 00090005FFD8
AIR Degrees Fahrenheit
I haven't tested below zero, to see if it will throw a neg in there....
it only got to 9 degrees at home so far and my Yaris
blew me a 7, 8, 9, 11 all the way to work. it is dead-on accurate
(my home probe is on the sunny side, my Yaris is downhill from it, hence colder)
The other built-in indicator on the scangauge
(FIa) Intake air was showing 22-24 deg (not useful data)
After I tried it (and also tried it directly by CAN bus message to the ECM) I realized that you have a 2010. When I request the list of supported PIDs from the ECM 0146 is masked as an unsupported PID, so I have a feeling that ambient air temp is a new PID for 2010.Originally Posted by 127.0.0.1 ↑yeah I have a 2010 5 door US model automatic
here is the code I loaded
Ambient Air Temperature (F)
07DF0146 04410546 2808 00090005FFD8
AIR Degrees Fahrenheit
wowser, so I just kinda got lucky playing with the xgauge and 'common'Originally Posted by CTScott ↑After I tried it (and also tried it directly by CAN bus message to the ECM) I realized that you have a 2010. When I request the list of supported PIDs from the ECM 0146 is masked as an unsupported PID, so I have a feeling that ambient air temp is a new PID for 2010.
can bus data. mine happens to be 'common'. woot. !
all the more reason scangauge > ecometer
FYI ha, tried cansf fuel level code, that one doesn't work
Arg! I was so looking forward to using this till I read further!! (I have a 2009)
eh.... 08 here... wish I had a 2010 tho... the extra air bags would be nice if I get in a wreck.
Well, here's the ghetto way. It's worked well since August when I put it in the car.
My ghetto exterior thermometer
My ghetto exterior thermometer