Replies continued
bobolinkoWas Hawaii - Moved to Everett WA · Mar 16, 2010#51SQCOMP,
Firstly, THANK YOU FOR YOUR SERVICE TO AMERICA.
Secondly, Have you thought of using spray foam filler to deaden the open areas under the chassis? I have used 8 cans of foam filler from Home Depot to NOITCEABLY remove a lot of road noise by filling the underbody framing areas. There are a bunch of hollow areas that resonate something fierce, and with the foam filler, it's very quiet. The trunk area under the spare has a lot of areas also. I found many in the engine area left and right of the motor, and the fender arches have many areas too. Undercoat spray on the front wheel thingies that are attached to the brake backplates make a bunch of noise on rough roads, and now are quiet too. These materials are far less cost than the RoadKill matting and also take your already quiet ride to a quieter stage.... Have Fun, and Again, Thank you for your contribution to America!
Aloha from Hawaii!
-bob
sqcompThread starterBack at home · Mar 16, 2010#52*
castNew England · Mar 19, 2010#53Bob,
Interesting idea. But have you ever thought about the chance that it might cause the rust since it might hold some moisture? I am not saying it will. Just curious if there is such possibility.
Thanks.
Originally Posted by
bobolinko ↑ SQCOMP,
Firstly, THANK YOU FOR YOUR SERVICE TO AMERICA.
Secondly, Have you thought of using spray foam filler to deaden the open areas under the chassis? I have used 8 cans of foam filler from Home Depot to NOITCEABLY remove a lot of road noise by filling the underbody framing areas. There are a bunch of hollow areas that resonate something fierce, and with the foam filler, it's very quiet. The trunk area under the spare has a lot of areas also. I found many in the engine area left and right of the motor, and the fender arches have many areas too. Undercoat spray on the front wheel thingies that are attached to the brake backplates make a bunch of noise on rough roads, and now are quiet too. These materials are far less cost than the RoadKill matting and also take your already quiet ride to a quieter stage.... Have Fun, and Again, Thank you for your contribution to America!
Aloha from Hawaii!
-bob
Alien MantisArizona · Mar 19, 2010#54 Originally Posted by
sqcomp ↑ Hey, here's an idea! Think we can do an SPL system in this Caimen? It already has lots of armor and at leat 3" thick "glass"...
Cool truck. I haven't seen one of those yet.
I seen Strikers and Humvees, but not that thing.
I wouldn't put a system in that thing, because that gun on top is all the music I would need!
Lets put some of those trucks along the America/Mexico border to "persuade" them drug dealers and human traffickers to stay away!
🤘
sqcompThread starterBack at home · Mar 19, 2010#55*
HerbicidalRoseville, CA - USA. · Apr 19, 2010#56Excellent post and ton of thanks for taking the time to upload all those pictures and the comments to go with. 👏 👍
I've started working on my car this past weekend, but I'm starting at the trunk and working forward. The trunk is now 98% done and tonight I'm pulling the rear seat to get to the floor underneath. This is where your pictures are making it a whole lot easier!
I'm not going to do a killer stereo, but just working on reducing unwanted road noise and going for the more "upscale" feel. I plan on leaving the stock head unit, but upgrading the speakers when I get to the doors (and the speakers in the rear deck). Maybe a small amp to go with. Not sure about that yet.
Anyway, major props to you on your install! I too thank you for your service to our great country!
🙇
sqcompThread starterBack at home · Apr 19, 2010#57*
HerbicidalRoseville, CA - USA. · Apr 20, 2010#58I'm looking forward to more pics! You're inspiring me! 😁
Holy cow! It was more than a TUG to get the rear seat out! I ended up banging my head on the roof when that sucker gave way. Now I need to remove the seat subframe and the plastic side panels and so forth so I can get to the floor under the seat, etc.
By the way, I noticed a ton of space behind those plastic pieces at the base of the seat. Basically what your heels would touch while sitting down - right behind there. Do you think the addition of some thick foam pieces stuffed in there after doing the sound deadening mat and Ensolite would be worth it? 🤷 Seems like an easy place to gain some more noise reduction.
derickveliz2Central, MA · Apr 20, 2010#59For me taking the rear seat out was very painful! it was a TUG x 2
I notice the extra space too, and thought about it, after treating my rear seats I don't think needs more foam, it's very quiet back there. It doesn't heart though.
D.
.
HerbicidalRoseville, CA - USA. · Apr 20, 2010#60 Originally Posted by
derickveliz2 ↑ For me taking the rear seat out was very painful! it was a TUG x 2
I notice the extra space too, and thought about it, after treating my rear seats I don't think needs more foam, it's very quiet back there. It doesn't heart though.
D.
.
Thanks for that. Just curious, did you do the doors too? How crazy did you get with the sound deadening material?
derickveliz2Central, MA · Apr 20, 2010#61 Originally Posted by
Herbicidal ↑ Thanks for that. Just curious, did you do the doors too? How crazy did you get with the sound deadening material?
Yes I did the doors too, covering 25 % of the flat areas in the doors with CLD Tiles I took care of the panel resonance, then CCFoam and MLVinyl working as noise barrier.
I have some pictures HERE
D.
.
HerbicidalRoseville, CA - USA. · Apr 20, 2010#62 Originally Posted by
derickveliz2 ↑ Yes I did the doors too, covering 25 % of the flat areas in the doors with CLD Tiles I took care of the panel resonance, then CCFoam and MLVinyl working as noise barrier.
I have some pictures HERE
D.
.
Excellent! Nice job! 👍 I'm having fun with this project! Fortunately I have my Tundra to drive while my Yaris is undergoing the "retro fit". 🙂
jonimacKSA · Apr 28, 2010#63Excellent!!! Best pattern - easy to follow, big Thanks!!!
DailyDriverutah · Apr 28, 2010#64Thanks for the thread! I am excited to see how things progress. One of these days i'm going to do my 3dr lftback... It's been helpful to watch you guys.
sqcompThread starterBack at home · Apr 28, 2010#65*
sqcompThread starterBack at home · May 4, 2010#66*
derickveliz2Central, MA · May 4, 2010#67 Originally Posted by
sqcomp ↑ Update:
Check out the pics of the headliner removal, deadening, and replacement. Hmmm...looks like nothing happened! I like it that way. If anyone has any questions about the removal of the headliner, go ahead and ask. There are a few things that you have to do to get it out in one piece.
Where are the pictures? I really want to get there!
Thanks a million!
sqcompThread starterBack at home · May 4, 2010#68*
derickveliz2Central, MA · May 4, 2010#69 Originally Posted by
sqcomp ↑ back on the first post. I kept them all together. The're at then bottom. Let me know if you have any questions.
Thanks
Look at this: Manual Pages 12 through 25, does the manual gives you a good reference to follow and to take the headliner down? or
could you add some tips/notes? where to START, etc In my case I only would like to stick my hand between the roof and the headliner to apply 6 or 8 CLD Tiles to take care of the resonance, so I don't really need to take it all the way down, but loose the ends(corners or sides) one at a time.
Any feed back it's appreciated, thanks! This is Page # 12 in the Manual
Picture not included in this copy sqcompThread starterBack at home · May 4, 2010#70*
tk-421Dagobah · Dec 13, 2010#71I have closed the thread and removed the sticky to comply with the OP's request.