Has any one installed a remote start on their 08 Yaris? Will Toyota dealers install one? Am afraid to go to anyplace but Toyota lest my warranty be voided if something goes wrong with the remote start.
Remote Starting
32 posts · 25,282 views
Replies 31
I have installed it on the 07, which I believe in the starter department is identical, as long as you dont have an immobilizer, which I believe some yarii do.
easy way to see if an aftermarket starter is possible is to have a key made from your master key, just a standard key from anywhere, like wal-mart, and try to drive your car, if you can, you dont have the immobilizer, and you can install the remote starter.
I had to probe with a multimeter to find all the right wires.
Im sure that a dealer would install one, but expect it to come at a premium.
I did mine myself in around an hour or so, and I have a standard, so I had to bypass the clutch switch.
easy way to see if an aftermarket starter is possible is to have a key made from your master key, just a standard key from anywhere, like wal-mart, and try to drive your car, if you can, you dont have the immobilizer, and you can install the remote starter.
I had to probe with a multimeter to find all the right wires.
Im sure that a dealer would install one, but expect it to come at a premium.
I did mine myself in around an hour or so, and I have a standard, so I had to bypass the clutch switch.
I installed one on my 09 the week I got it and at the same time we installed one in SodiumDuck's 08. My 09 had the immobilizer and his 08 didn't. For mine I had to purchase a key bypass module in addition to the remote starter. The Yaris is the easiest car I have ever installed one on as far as access goes. Everything that you need to connect to is accessible right at the steering column (and the driver side kick panel if you are dong keyless entry at the same time).
Most dealers contract out the install of remote starters, and their choice of 3rd party installer can be hit or miss.
Most dealers contract out the install of remote starters, and their choice of 3rd party installer can be hit or miss.
I love this RS Viper comes in handy in the winter
yeah, remote starting from the kitchen window is awesome. lol crank the heat when I get out at night, so its toasty when I get in in the morning
YEEAAAHHHH!! So that is nice and warm
Can any1 post a tutorial how to install the remote start.
And where is the cheapest place to buy the needed stuffs..
Thanks
# my 08 yaris comes with the immobilizer
And where is the cheapest place to buy the needed stuffs..
Thanks
# my 08 yaris comes with the immobilizer
The info is out there in bits and pieces through various threads. I really need to put one together. I have all the pics, but just never got around to doing so.Originally Posted by charleschia1986 ↑Can any1 post a tutorial how to install the remote start.
And where is the cheapest place to buy the needed stuffs..
Thanks
# my 08 yaris comes with the immobilizer
As for where and what to buy, most people like the DEI products (Viper, Python, Clifford, Valet, etc.) for quality/value. If you check out their website (http://www.directed.com/) and find one that you like the specs of, do a quick web search to find the best price.
I installed an UltraStart 1280XR PRO Remote Start/Keyless Entry in my 09. It's been on the car for over a year now and it's been perfect. It has the best range of any remote starter I've ever installed. My 09 has the Engine Immobilizer, so I used the Fortin KEY-OVERRIDE-ALL. It does the key bypass piece without requiring you to bury a key in the dash. It is plug and play to the UltraStart and many other remote starters.
http://www.ultrastarters.com/
http://ifar.ca/en/products/flash/key-override-all/
It would be nice to have, however, they have a puffer law in my state. You can't leave a started car unoccupied.
My 09 came with the power package, so it had power windows and locks. It didn't have the remote entry option though, so I used the UltraStart unit to trigger the power locks.Originally Posted by mwalls ↑Did you install a cable actuator selonoid to go with your keyless entry? If so, could you advise which one you used? I guess Toyota doesn't have one they can provide.
As for door cable actuators, many here have used the A-1 Electric kit with success.
The same actuator could be used for remote release of a sedan trunk. I haven't done anything yet with popping the hatch open on my LB.
http://www.a1electric.com/catalog/cat_key.htm
Anyone put one in a 5spd? I'm told the unit itself is close to $300, but it's wintery here 8 months basically and I want one.
For the heat piece, you will need to leave the knobs where you want them. The advantage there is nice and warm in the winter and nice and cool in the summer.Originally Posted by sickaroll ↑I just ordered a Viper 5701 with remote start, keyless entry for my 2001 Yaris, my mechanic cousin is going to help me install it, should be fun. Looking forward to Remote Start I have to say, saw it on that VW Passat ad, and it looks brilliant.
I presume, as I don't have air con/climate control, only an 'analog' heater, that I'll have to leave the knobs set on to heat (swung clockwise) if I'm to have a nice warm car first thing in the morning when the snow sets in?
Mine look just like these:
http://www.lyonssystemsserver.com/br...-010-PTIMG.jpg
Any idea if I'll need the Immobiliser bypass?
You can tie the rear window defogger to the aux output of the remote starter to clear the back window. Here, where we get frost and snow that can be quite handy.
For the immobilizer piece, look at your ignition switch. If it is all metal then you don't have an immobilizer. If it has about a 3 cm metal part surrounded by black plastic, then you do.
Interesting... So for an Avital 4003 system, to activate the defogger I would have to tie it the (+) OUTPUT TO ACCESSORY CIRCUIT (Orange wire) ?
Actually on an 09 you would take the black wire in pin 2 (next to the pink in pin 3) and you would bring that wire to ground to activate the rear window defogger. So, you would need an (-) accessory output or you would have to use a relay off the (+) output to invert it.Originally Posted by monbonlupin ↑Interesting... So for an Avital 4003 system, to activate the defogger I would have to tie it the (+) OUTPUT TO ACCESSORY CIRCUIT (Orange wire) ?
I then need to use the ORANGE (-) ACCESSORY OUTPUT wire from the 4-pin satellite harness instead of the orange wire (+) OUTPUT TO ACCESSORY CIRCUIT. Is that correct ?



Correct. And, it is fine that it is not a "heavy gauage" output, since you are connecting to the coil side of the relay that drives the defogger.
Help installing Avital 4003 with Fortin Key Override All
________________________________________
Hi,
I'm trying to install an Avital 4003 remote starter add-on module with a Fortin Key Override All transponder key bypass on my Yaris Sedan 2009 with factory keyless entry, engine immobilizer, no alarm system and automatic transmission.
Here’s what I did using CTScott's manual. Something must be wrong because it doesn’t seem to work…
Thanks.
Fortin Key Override All
Purple/White RX (Data In) to Green wire D24-4
Yellow/Black Tx (Data Out) to Violet wire D24-5
Blue (-) While running to Avital Remote Starter Blue/White wire H2/5 (-) 200 mA 2nd Status/Rear Defogger Output
Green Key Sense to Yellow wire D19-1
Connector 1 (Black - 4 pins) Installation without Data-Link
Red +12V to Yellow wire D8-4
Black to Ground
Avital 4003
Primary harness (H1), 9-pin connector
H1/1 LIGHT GREEN/BLACK (-) FACTORY ALARM DISARM : I didn’t use it
H1/2 GREEN/WHITE (-) FACTORY ALARM REARM : I didn’t use it
H1/3 YELLOW (+) IGNITION OUT (TO ALARM) : I didn’t use it
H1/4 WHITE/BLUE (+/-) ACTIVATION INPUT to brown wire GD1-5. I understand that it is used to activate the remote starter. When I press twice on the Lock button of my factory keyless entry, the car should start. Am I wrong ???
H1/5 ORANGE (-) GROUND WHEN LOCKED : I didn’t use it
H1/6 BROWN (-) HORN OUTPUT : I didn’t use it
H1/7 RED/WHITE (-) TRUNK RELEASE OUTPUT : I didn’t use it
H1/8 Black (-) CHASSIS GROUND CONNECTION to Ground
H1/9 White (+/-) LIGHT FLASH OUTPUT to Parking Lights (-) White wire D4-13
4-pin satellite harness diagram
1 BLUE (-) STATUS OUTPUT : I didn’t use it
2 ORANGE (-) ACCESSORY OUTPUT : I didn’t use it
3 PURPLE (-) STARTER OUTPUT : I didn’t use it
4 PINK (-) IGNITION OUTPUT : I didn’t use it
Heavy gauge relay wiring diagram
1 PINK (+) OUTPUT TO IGNITION CIRCUIT to Green wire D8-1
2 PURPLE (+) OUTPUT TO STARTER CIRCUIT to Black wire D8-7
3 ORANGE (+) OUTPUT TO ACCESSORY CIRCUIT White wire D8-2
4 & 6 RED (+) (30A) HIGH CURRENT 12V INPUT : Both connected to top terminal of unused fuse slot (+) Battery Voltage in DIY manual
5 PINK/WHITE (+) PROGRAMMABLE OUTPUT FOR ACCESSORY OR IGNITION to pink wire D8-6
Door lock Harness, 3-pin connector
1 Blue (-) Unlock Output : I didn’t use it
2 Empty – Not used
3 Green (-) Lock Output: I didn’t use it
Remote start harness (H2) wiring diagram
H2/1 BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT : I didn’t use it
H2/2 VIOLET/WHITE TACHOMETER INPUT WIRE : I didn’t use it
H2/3 BROWN (+) BRAKE SWITCH SHUTDOWN WIRE to green wire A13-1
H2/4 GRAY (-) HOOD PINSWITCH SHUTDOWN WIRE : I didn’t use it
H2/5 BLUE/WHITE (-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT to Blue (-) While running of Fortin Key Override All
Programming Jumpers
Light Flash set to (-)
Activation input set to (-)
________________________________________
Hi,
I'm trying to install an Avital 4003 remote starter add-on module with a Fortin Key Override All transponder key bypass on my Yaris Sedan 2009 with factory keyless entry, engine immobilizer, no alarm system and automatic transmission.
Here’s what I did using CTScott's manual. Something must be wrong because it doesn’t seem to work…
Thanks.
Fortin Key Override All
Purple/White RX (Data In) to Green wire D24-4
Yellow/Black Tx (Data Out) to Violet wire D24-5
Blue (-) While running to Avital Remote Starter Blue/White wire H2/5 (-) 200 mA 2nd Status/Rear Defogger Output
Green Key Sense to Yellow wire D19-1
Connector 1 (Black - 4 pins) Installation without Data-Link
Red +12V to Yellow wire D8-4
Black to Ground
Avital 4003
Primary harness (H1), 9-pin connector
H1/1 LIGHT GREEN/BLACK (-) FACTORY ALARM DISARM : I didn’t use it
H1/2 GREEN/WHITE (-) FACTORY ALARM REARM : I didn’t use it
H1/3 YELLOW (+) IGNITION OUT (TO ALARM) : I didn’t use it
H1/4 WHITE/BLUE (+/-) ACTIVATION INPUT to brown wire GD1-5. I understand that it is used to activate the remote starter. When I press twice on the Lock button of my factory keyless entry, the car should start. Am I wrong ???
H1/5 ORANGE (-) GROUND WHEN LOCKED : I didn’t use it
H1/6 BROWN (-) HORN OUTPUT : I didn’t use it
H1/7 RED/WHITE (-) TRUNK RELEASE OUTPUT : I didn’t use it
H1/8 Black (-) CHASSIS GROUND CONNECTION to Ground
H1/9 White (+/-) LIGHT FLASH OUTPUT to Parking Lights (-) White wire D4-13
4-pin satellite harness diagram
1 BLUE (-) STATUS OUTPUT : I didn’t use it
2 ORANGE (-) ACCESSORY OUTPUT : I didn’t use it
3 PURPLE (-) STARTER OUTPUT : I didn’t use it
4 PINK (-) IGNITION OUTPUT : I didn’t use it
Heavy gauge relay wiring diagram
1 PINK (+) OUTPUT TO IGNITION CIRCUIT to Green wire D8-1
2 PURPLE (+) OUTPUT TO STARTER CIRCUIT to Black wire D8-7
3 ORANGE (+) OUTPUT TO ACCESSORY CIRCUIT White wire D8-2
4 & 6 RED (+) (30A) HIGH CURRENT 12V INPUT : Both connected to top terminal of unused fuse slot (+) Battery Voltage in DIY manual
5 PINK/WHITE (+) PROGRAMMABLE OUTPUT FOR ACCESSORY OR IGNITION to pink wire D8-6
Door lock Harness, 3-pin connector
1 Blue (-) Unlock Output : I didn’t use it
2 Empty – Not used
3 Green (-) Lock Output: I didn’t use it
Remote start harness (H2) wiring diagram
H2/1 BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT : I didn’t use it
H2/2 VIOLET/WHITE TACHOMETER INPUT WIRE : I didn’t use it
H2/3 BROWN (+) BRAKE SWITCH SHUTDOWN WIRE to green wire A13-1
H2/4 GRAY (-) HOOD PINSWITCH SHUTDOWN WIRE : I didn’t use it
H2/5 BLUE/WHITE (-) 200mA 2ND STATUS/REAR DEFOGGER OUTPUT to Blue (-) While running of Fortin Key Override All
Programming Jumpers
Light Flash set to (-)
Activation input set to (-)
Does the car try to start, but doesn't fire?
Does the remote starter flash the parking lights flash with an error code?
Does the remote starter flash the parking lights flash with an error code?
No, nothing happens...
Have you gone through the configuration portion of the remote starter to make sure that thinks like that activation input are properly configured? For example that input is a +/- input which means that it probably needs to be told whether the signal is a + or - signal.
There's an activation input polarity jumper that I set to (-). What do you think about my wiring ? If it is correct, I might try to solder all the heavy gauge connections because the red splice taps I used seem to be too small...
Thanks !
Thanks !
With a quick look it seems to be OK. Before you start rewiring, test is manually, by disconnecting that input and touching that wire to a ground twice to see if it tries to start. It may be that the remote starter doesn't like the pulse length/spacing.Originally Posted by monbonlupin ↑There's an activation input polarity jumper that I set to (-). What do you think about my wiring ? If it is correct, I might try to solder all the heavy gauge connections because the red splice taps I used seem to be too small...
Thanks !
Ok, i'ill try that...
Thanks
Thanks
I touched the input to a ground twice and NOTHING...
Does it respond if you try to go through the programming menu?
yes
I just found the manual for the 4003. The neutral safety input has to be grounded for it to allow starting.
Thanks, I grounded the safety switch. Nothing changed but when I wired the H1/4 WHITE/BLUE (+/-) ACTIVATION INPUT wire to the blue GD1-9 wire, the car started for a few seconds then the engine stopped. I was able to restart the car by pressing the unlock button. The car ran a few seconds and stopped again. Does that mean that the brown wire in GD1-8 is not the correct wire ?
Thank you for your help !
Thank you for your help !
ctscott heres one for you i have i have viper remote start and keyless entry installed in my o8 hatchback it seems to have a small constant battery draw if i leave me car stored in my familys wharehouse when i go out of town for more than a week at a time the battery is dead compltely yes i have a full sound system but i have pulled both 100 amp fuses on the power lines to the amps but still have the battery dain problem its funny my stereo guy that helps me out told me it was the remote start doing it and i told him he was crazy but all point lead to just that i have no other non factory items installed that use power maybe you can help me ?
Originally Posted by monbonlupin ↑Thanks, I grounded the safety switch. Nothing changed but when I wired the H1/4 WHITE/BLUE (+/-) ACTIVATION INPUT wire to the blue GD1-9 wire, the car started for a few seconds then the engine stopped. I was able to restart the car by pressing the unlock button. The car ran a few seconds and stopped again. Does that mean that the brown wire in GD1-8 is not the correct wire ?
Thank you for your help !
Brown is the control for the door unlock via the key switch. Blue is the unlock detection, so the blue would be the better choice.
Is it possible to make the remote starter start up your heated mirrors too? and heck while we are at it what about the heated seats too?Originally Posted by CTScott ↑For the heat piece, you will need to leave the knobs where you want them. The advantage there is nice and warm in the winter and nice and cool in the summer.
You can tie the rear window defogger to the aux output of the remote starter to clear the back window. Here, where we get frost and snow that can be quite handy.
For the immobilizer piece, look at your ignition switch. If it is all metal then you don't have an immobilizer. If it has about a 3 cm metal part surrounded by black plastic, then you do.
If the starter has enough outputs you can start whatever accessories you want. If it doesn't have enough you would have to use a bunch of relays driven off of the outputs that it does have.Originally Posted by bad ↑Is it possible to make the remote starter start up your heated mirrors too? and heck while we are at it what about the heated seats too?