ArkhangelOriginal postPuerto Rico · Dec 7, 2009#1Got some of the trunk done yesterday
Before
Picture not included in this copy
During
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
What its gonna look like when done for now.
Picture not included in this copy
What i want to do with the subs in Fiberglass afterwards
[img]]http://farm3.static.flickr.com/2601/3820206179_2e992c208e.jpg[/img]
One on each side
Working on some ideas of either adding some vents and fans or cutting the top where the amps are and making a grill of some sort so they dont overheat
Replies 23
SlickHouston, Texas · Dec 7, 2009#2Very clean, keep up the good work. Can't wait to see the finished product.
1NZYaris1New Zealand · Dec 7, 2009#3nice job 🙇 , but you could have vacumed first 😆
sqcompBack at home · Dec 8, 2009#4We did actually crimp or solder the signal wires correct? Those electric tape connections make me climb walls. Look! See? I'm on the ceiling...
:)
Did you mess with the placement of the subs before final placement?
ArkhangelThread starterPuerto Rico · Dec 8, 2009#5 Originally Posted by
1NZYaris1 ↑ nice job 🙇 , but you could have vacumed first 😆
:P thats the old rug, gonna wrap everything soon
Originally Posted by
sqcomp ↑ We did actually crimp or solder the signal wires correct? Those electric tape connections make me climb walls. Look! See? I'm on the ceiling...
:)
Did you mess with the placement of the subs before final placement?
nothing is wired in yet, the subs are just place for the moment
most probably there gonna go back against the seat to have easy access to the spare
ArkhangelThread starterPuerto Rico · Dec 8, 2009#6Would like to make the subs like this
Picture not included in this copy
sqcompBack at home · Dec 8, 2009#7What is so difficult about that? Make it happen. I see a "cover" or a raised floor that houses the enclosure and a single amplifier. The most difficult thing about this that I see is the blend of the enclosure and the floor itself. Even the carpeting isn't particularly difficult...rather time consuming when you hit the enclosure. Lots of trimming and stretching. The fun part is trying to find the specific carpet match if you're a DIY'er. Looks like they're using a Rainbow woofer. I'm also betting that there is a grill for that woofer as well. The sunken trim ring is a little more than just flushed. Is that a DLS amplifier? It looks small in the picture...that doesn't REALLY look like a DLS...hmmm...
Heck, it's all fun! Let's see some more!
r3b3lMississippi · Dec 8, 2009#8Do one better man make a fiberglass enclosure and amp rack. Its easy. just takes time.
ArkhangelThread starterPuerto Rico · Dec 8, 2009#9 Originally Posted by
sqcomp ↑ What is so difficult about that? Make it happen. I see a "cover" or a raised floor that houses the enclosure and a single amplifier. The most difficult thing about this that I see is the blend of the enclosure and the floor itself. Even the carpeting isn't particularly difficult...rather time consuming when you hit the enclosure. Lots of trimming and stretching. The fun part is trying to find the specific carpet match if you're a DIY'er. Looks like they're using a Rainbow woofer. I'm also betting that there is a grill for that woofer as well. The sunken trim ring is a little more than just flushed. Is that a DLS amplifier? It looks small in the picture...that doesn't REALLY look like a DLS...hmmm...
Heck, it's all fun! Let's see some more!
i Dont know what components are in that install just used the pic as a general idea for the subs
getting materials together see when i can pull off the install,
ordered some 10" mdf rings to start of
kinda thinking where the amps are just to cut a hole in the floor that covers them and make a metal grill so the heat can just rise
talnlnkySpokane, Wa · Dec 8, 2009#10glass is spendy... but SOOO much fun ... well.... except for the whole skelton building, and sanding part.... hahaha... looks cool tho.
sqcompBack at home · Dec 9, 2009#11No t-shirts when doing glass work. You'll be itching for days. Perhaps I'm a sick one...I enjoy all of the building process of glass racks and enclosures.
IndianspringsazAZ · Dec 9, 2009#12Looks good. Keep the pics comming through the entire build.
tomatoSan Francisco Bay Area · Dec 9, 2009#13Looking real good! Thanks for posting DIY pics of the process. 👍
ArkhangelThread starterPuerto Rico · Dec 9, 2009#14Trying to find Dinamat here in PR but cant seem to find it, went to some audio install places they dont carry it and arent very helpful :S might have to order , also order the fiberglass.
Found
http://cgi.ebay.com/ebaymotors/10-Sq...ehicleQ5fParts $20 for 10 square feet
would that be enought for the trunk?
would like to wrap the floor wheel wheels in one shot, eventually do from the back seat floor to the firewall, and all four doors
IndianspringsazAZ · Dec 10, 2009#15Use Second skin products instead.
talnlnkySpokane, Wa · Dec 10, 2009#16 Originally Posted by
sqcomp ↑ No t-shirts when doing glass work. You'll be itching for days. Perhaps I'm a sick one...I enjoy all of the building process of glass racks and enclosures.
i hate the sanding when i'm sanding.. but afterwards I feel very accomplished.
I kinda cheated on my kidpods I made for the koda8's in the mazda.... Layered on the rage gold about a half inch thick in places.... made smoothing them out VERY easy.... looked good when they were done... tho.. i never got around to painting them.... oh well.. they are gone now.
talnlnkySpokane, Wa · Dec 10, 2009#17 Originally Posted by
Indianspringsaz ↑ Use Second skin products instead.
or
www.raammat.com dynamat is pricey... it's like buying a nike brand ball when you could just go out and buy a wilson or spalding or any other brand for 80% (or lesss) of the price.
sqcompBack at home · Dec 11, 2009#18I've been using Raammat, Rick is a cool guy. He's got a new peel and seal foam mat ot now too.
ArkhangelThread starterPuerto Rico · Dec 11, 2009#19 Originally Posted by
talnlnky ↑ or
www.raammat.com dynamat is pricey... it's like buying a nike brand ball when you could just go out and buy a wilson or spalding or any other brand for 80% (or lesss) of the price.
Thanx for the heads up, sent a msg to see what would shipping be.
panzerpantsSyracuse, Ny & Grover Beach, CA · Dec 13, 2009#20Hey! Lets go play pool. ;)
Not bad by the way.
pennyracergrants pass · Jan 18, 2010#21my whole car is done in raammat nice product and rick gets the orders right out !!!! getting ready to place another order for my sons ford ranger i will double line the whole cab on that one also
goku87AK · Jan 18, 2010#22RAAMmat BXT II - Cost per square foot: $2.91
Second Skin Damplifier - Cost per square foot: $2.42
sqcompBack at home · Jan 18, 2010#23You know...that's prolly accurate too. I don't use Raamat for anything aside from the ensolite.
pennyracergrants pass · Jan 18, 2010#24i dont shop around now im happy with raammatt and the price is right im cool with it dont really like to switch when i have used something that works for me thanks for the info you know some times you get what you pay for also i like to do a job one time only no matter what you use its better than nothing thats for sure