rossmanOriginal postONTARIO, CANADA · Nov 23, 2009#1Hi,
Does anyone actually use a torque wrench when swapping summer to winter rims?
In the past I have never used one and I dont think it did any damage to my rotors or pads. But now that I have a new car and a nice yaris I dont want to take the risk.
Suggestions???
Thanks
Replies 21
1stToyotaOklahoma · Nov 23, 2009#2 Originally Posted by
rossman ↑ Hi,
Does anyone actually use a torque wrench when swapping summer to winter rims?
In the past I have never used one and I dont think it did any damage to my rotors or pads. But now that I have a new car and a nice yaris I dont want to take the risk.
Suggestions???
Thanks
I always use a torque wrench on my lugs. I also use torque sticks. In general I use some kind of torque wrench on any nut/bolt I tighten.
supmetSouthern California · Nov 23, 2009#3^^ eh.. torquing is good, but your lugs will be fine as long as they are tight.
cali yarisCanoga Park, CA · Nov 23, 2009#4Changing your wheels is not related to your brake system (rotors/pads).
I ALWAYS torque my lug nuts, but I think also take my wheels off more often than most do.
thebarberGrand Rapids, MI · Nov 23, 2009#5i swapped wheels about a half dozen times this summer and never use my torque wrench anymore....though i used to use it all the time
now i just use a breaker bar w/ my socket to tq my lugs. a friend of mine from MO.com was surprised and disappointed that i didnt tq my wheels until he checked one of my wheels....was pretty much the right torque! ;)
i guess i just do it by feel now....
got some wheels overtorqued on the aveo by a local shop who obviously used an impact wrech....had to use a 4' long pipe on the end of my breaker bar to get them off!
beardaGermantown, MD · Nov 23, 2009#6 Originally Posted by
cali yaris ↑ Changing your wheels is not related to your brake system (rotors/pads).
I ALWAYS torque my lug nuts, but I think also take my wheels off more often than most do.
If you overtorque the lugs can't you warp the rotor? Kind of makes sense since you're increasing pressure on the rotor, especially if the torque is unbalanced from each lug.
IndianspringsazAZ · Nov 23, 2009#7 Originally Posted by
bearda ↑ If you overtorque the lugs can't you warp the rotor? Kind of makes sense since you're increasing pressure on the rotor, especially if the torque is unbalanced from each lug.
No😉
supmetSouthern California · Nov 23, 2009#8 Originally Posted by
thebarber ↑ got some wheels overtorqued on the aveo by a local shop who obviously used an impact wrech....
Ya, I've seen/had 2 cross threaded lugs(the 4 foot pipe just snapped the lug 🙁), and about 100 over tightened from tire shops, dealers, brake shops, quick lube places. I'd say most place just impact them on way to tight... discount tire is the only place I've seen torque them, and you still have to watch to make sure they pick up the torque wrench sitting 5 feet away 🙄
Its probably *best* for the car to torque them every time, but far from necessary
nemelekArizona · Nov 23, 2009#9I don't torque mine.
fmicleSan Jose, CA, USA · Nov 23, 2009#10As far as I know, the aluminum/alloy wheels are more sensitive and should be torqued correctly, to insure that you have the same pressure/tightness on each bolt. I never used a torque wrench before on all my previous stock steelies, but it's a different ball game now 🙂
schleppyBoston, MA · Nov 23, 2009#11I always use a torque wrench. It makes removing them a lot easier when it's time to swap again.
I use a 1/2" Husky Pro 50-250 ft-lbs. torque wrench during each rotation. I find a 13/16" fits better than a 21mm. Get the right tool and use it.
TLyttleKeremeos BC · Nov 23, 2009#13I started using a torque wrench when the local tire shop stretched s few lugs putting on my snowies with an impact. Then they had the audacity to tell me that their impact was "torque controlled" and I was overtightening the new studs! Technicians they are not...
thebarberGrand Rapids, MI · Nov 23, 2009#14put winters on both cars tonight....couldnt even find my breaker bar let alone the torque wrench.....giant ratchet ftw!
YarisSedanCalifornia - Bay Area · Nov 23, 2009#15I always torque my wheels down. I think factory spec is 76 ft lbs
MUSKOKA800Chatham, Ontario, Canada · Nov 24, 2009#16I always use my torque wrench for final tightening. Bought one, may as well use it. The extra couple of minutes isn't an issue. I also insist that tire shops do as well. If you've ever been on the roadside fighting to get lugs undone with only the OEM tools you'd understand why.
robkayNW OH · Nov 24, 2009#17I try to torque everything to proper specs. Do you homework, though, as torque wrenches come in various torque ranges and, in particular,
quality.
I bought an S & K 74101 which, to me, was a good balance between price and quality, and also a good torque range for most apps I would be using it for. Here's a link (you might find it cheaper other places; I bought mine at tooltopia.com, but it doesn't look like they carry it at the moment):
http://www.amazon.com/SK-74104-10-fo.../dp/B00061SNHK Roscoe" When we do right no one remembers, when we do wrong on one forgets. " · Nov 24, 2009#18 Originally Posted by
schleppy ↑ I always use a torque wrench. It makes removing them a lot easier when it's time to swap again.
👍
WeeYariGeorgetown, Ontario, Canada · Nov 24, 2009#19 Originally Posted by
thebarber ↑ put winters on both cars tonight....couldnt even find my breaker bar let alone the torque wrench.....giant ratchet ftw!
What happened to your little electric impact wrench?
DerFlosserUSA · Nov 24, 2009#20 Originally Posted by
supmet ↑ Ya, I've seen/had 2 cross threaded lugs(the 4 foot pipe just snapped the lug 🙁), and about 100 over tightened from tire shops, dealers, brake shops, quick lube places. I'd say most place just impact them on way to tight... discount tire is the only place I've seen torque them, and you still have to watch to make sure they pick up the torque wrench sitting 5 feet away 🙄
Its probably *best* for the car to torque them every time, but far from necessary
4 foot pipe for lugnuts? People bring their cars to those lube shops and actually let those guys touch their cars? Sounds like a torque wrench would be a good investment for you.
Obviously it's not neccessary but highly recommended to use a torque wrench. A good quality torque wrench can be had for minimal money and re-calibrated whenever neccessary. I have found the better one to be withing specs after years of usage as long as you reset the wrench and don't keep tension on the spring. I highly recommend the use of a torque wrench...when your family is riding in the car, you can never have enough piece of mind.
thebarberGrand Rapids, MI · Nov 24, 2009#21 Originally Posted by
WeeYari ↑ What happened to your little electric impact wrench?
tucked away somewhere
and it was 9pm last night i did them...too late to be that loud
WeeYariGeorgetown, Ontario, Canada · Nov 24, 2009#22Just put on my snows this morning. Even tho everything gets torqued on at 76 lbs, had to impact the front right ones off.