Yarisworld Archive

Weapon R intake manifold

25 posts · 14,790 views

JayTee09Original postHouston, Texas · Nov 22, 2009#1
I know that its been talked about but I would like to know if anyone has used it yet on a yaris. The scion guys swear by it and WR claims a whopping 50+ HP whitch im sure is bull but if it allows for any perforomance gain it might be worth it.

Picture not included in this copy

the general construction looks a little shoddy to me

1 attachment not included in this copy

Replies 24

Nexus1155Dorchester · Nov 22, 2009#2
What is shoddy about it? lol

Do you have any links to it/scionlife links too?

Thanks
JayTee09Thread starterHouston, Texas · Nov 22, 2009#3
one of the tubes are a bit "off" if that makes any sense and the welds are tad globby I'll try and get a link from scikotics of a guy with an Xb who is sponsored by WR
blacksandiegovitzJust chillin' out brah ! · Nov 22, 2009#4
I already posted up on this , xA / xb guys are seeing 5-8hp and around 8-10tq . Weapon R web-site also list these sold out till december . 1nz-fe intake manifold , Xa ...
JayTee09Thread starterHouston, Texas · Nov 22, 2009#5
http://www.scikotics.com/forums/show...ighlight=xbgod should be the link to the Scikotics thread. But like I said he's sponsored by WR and might be a little biased. but he has a pic of it installed but he never mentions what kind of more gains he got from it so...
JayTee09Thread starterHouston, Texas · Nov 22, 2009#6
Originally Posted by blacksandiegovitz ↑
I already posted up on this , xA / xb guys are seeing 5-8hp and around 8-10tq . Weapon R web-site also list these sold out till december.
yeah I was on the site earlier but the sold out bit wasnt what bothered me. It was the price and the advertised power gain. that made me scratch my head.
Nexus1155Dorchester · Nov 22, 2009#7
I think those welds look pretty good considering.

That intake manifold looks similar to Garms, but im assuming Garms is better designed since his actually makes more than 2x that power IIRC?
AlexNet0Rockland, ME · Nov 22, 2009#8
Originally Posted by JayTee09 ↑
yeah I was on the site earlier but the sold out bit wasnt what bothered me. It was the price and the advertised power gain. that made me scratch my head.
50 hp gain is specifically noted for forced induction and the ability to run much more boost.
cali yarisCanoga Park, CA · Nov 22, 2009#9
This won't fit the yaris, look at the bolt pattern and angle of the throttle body. It would need to be modified to fit at all.
JayTee09Thread starterHouston, Texas · Nov 23, 2009#10
Originally Posted by Nexus1155 ↑
That intake manifold looks similar to Garms, but im assuming Garms is better designed since his actually makes more than 2x that power IIRC?
I agree

Originally Posted by AlexNet0 ↑
50 hp gain is specifically noted for forced induction and the ability to run much more boost.
I guess I didnt read it deeply enough but it still seem like a stretch to me.

Originally Posted by cali yaris ↑
This won't fit the yaris, look at the bolt pattern and angle of the throttle body. It would need to be modified to fit at all.
all the more reason for me to wait on yours hehe
PHXDEMONPhoenix, AZ · Nov 24, 2009#11
Originally Posted by blacksandiegovitz ↑
I already posted up on this , xA / xb guys are seeing 5-8hp and around 8-10tq . Weapon R web-site also list these sold out till december . 1nz-fe intake manifold , Xa ...
Are these numbers with boost or NA? If those numbers are NA then it may be worth it to retrofit one 🤷
PHXDEMONPhoenix, AZ · Nov 24, 2009#12
Originally Posted by cali yaris ↑
This won't fit the yaris, look at the bolt pattern and angle of the throttle body. It would need to be modified to fit at all.
Bolt pattern is different too? Are you talking about on the TB or where it bolts to the head.
PHXDEMONPhoenix, AZ · Dec 2, 2009#13
Originally Posted by Black_Sheep_xB ↑
They had to push the log forward to clear the alternator.. skewing the angle of the runners

Picture not included in this copy

would have been nice to still make the time to run equal length runners though. I like mine.
Any horsepower increase on your toaster? Seems like it could be legit for NA apps with a ported and polished head.
severous01SE Texas · Dec 2, 2009#14
with all the hype and talk about this, i'm really surprised that someone hasnt gone to a welding shop or even a high school that has a welding program, brought some dimensions and pictures or even a real OEM setup, and had someone build one

hell, for 700 bux, i could find someone to do it. with scrap metal at that. get the aluminum sheet and pipe from metaldepot.com, find a laser cutter or waterjet, or even someone good with a die grinder/router, find someone who can weld it together....and you're done.
Nexus1155Dorchester · Dec 2, 2009#15
take some physics classes along with that welding class and you're golden. Yeah sure, that way can make an intake manifold aesthetically, will it work as well as it should? probably not. Would you even risk losing power, its a very good possibility if done incorrectly.
JayTee09Thread starterHouston, Texas · Dec 2, 2009#16
Originally Posted by Nexus1155 ↑
take some physics classes along with that welding class and you're golden. Yeah sure, that way can make an intake manifold aesthetically, will it work as well as it should? probably not. Would you even risk losing power, its a very good possibility if done incorrectly.
^^ thats why Garm's is taking as long as it is. Theres alot of design work involved
ddongbaphay · Dec 2, 2009#17
Physics? Pfft. That there is only a myth.
Nexus1155Dorchester · Dec 2, 2009#18
lol i hope you were bein sarcastic @_@.... obviously we all know fluid dynamics doesn't exist!!! :D
cali yarisCanoga Park, CA · Dec 2, 2009#19
I'm just trying to find 1 5/8" I.D. piping. Used to be available - I need it for the runners. 🙁
Nexus1155Dorchester · Dec 3, 2009#20
McMaster Carr?
TamagoOff Grid · Dec 3, 2009#21
just get a 1zz intake manifold from an older corolla. .. . done and done.
TamagoOff Grid · Dec 3, 2009#22
Originally Posted by cali yaris ↑
I'm just trying to find 1 5/8" I.D. piping. Used to be available - I need it for the runners. 🙁
what material?
cali yarisCanoga Park, CA · Dec 3, 2009#23
aluminum
SabretoothSt Cloud FL · Dec 3, 2009#24
Originally Posted by Tamago ↑
just get a 1zz intake manifold from an older corolla. .. . done and done.
Will it fit? lol
Nexus1155Dorchester · Dec 3, 2009#25
If it wasn't out of aluminum it would be easier, but i talked to him earlier i mean it seems really possible that would be a cheap viable option under ~ $150 if you knew what you were doing.