Yarisworld Archive

I'm stuck - front springs and shocks

12 posts · 3,854 views

fmicleOriginal postSan Jose, CA, USA · Nov 22, 2009#1
I can't loosen the f*cking bolt at the top of the shock.
This is what happened to my allen key
Picture lost · cqr1dw.blu.livefilestore.com
And this is how the bolt is looking like right now:
Picture lost · cqr1dw.blu.livefilestore.com

Any ideas?

Replies 11

1NZYaris1New Zealand · Nov 22, 2009#2
Hire a impact gun , worked for me .👍
AltitudeColorado · Nov 22, 2009#3
Did you try using a breaker bar on your wrench? Looks like you need lots more leverage.
fmicleThread starterSan Jose, CA, USA · Nov 22, 2009#4
...or just get the right damn tools... Went to Autozone and picked up a set of box wrenches with a deeper offset. Worked like a charm on the 2nd try... Now I feel like an idiot 😳
yarisugiハワイ · Nov 22, 2009#5
Good thing you got the right tools. Luckily that nut still had meat to grab on
or you would've been in an even bigger mess. Good job! You're installing drop springs I assume?
YarisSedanCalifornia - Bay Area · Nov 22, 2009#6
Thats what happens when you use cheap tools. Get a good allen wrench key and use a pipe on the end. Thats what i did and had no problems.
1NZYaris1New Zealand · Nov 22, 2009#7
Originally Posted by fmicle ↑
...or just get the right damn tools... Went to Autozone and picked up a set of box wrenches with a deeper offset. Worked like a charm on the 2nd try... Now I feel like an idiot 😳
Ahhhh at least you got the balls to admit it lol,
keep it up your almost done 👍
fmicleThread starterSan Jose, CA, USA · Nov 23, 2009#8
Well, I didn't want to be an ARROGANT idiot 🙂
advocatelocation · Nov 23, 2009#9
Glad things are going well fmicle. Remember I want to see those wheels...
fmicleThread starterSan Jose, CA, USA · Nov 23, 2009#10
In pictures or in person? Either way is fine with my by the way 🙂
yaris 2szgreece · Nov 23, 2009#11
coca cola
thebarberGrand Rapids, MI · Nov 23, 2009#12
had a similar thing happen w/ mine

had to use an air impact wrench and a half can of liquid wrench to get the top apart

other option: compress the spring to relieve the pressure on the plate, then hold the plate and use an impact wrench.....had to do something similar to that too....

edit: but now i see you got it apart...