Yarisworld Archive

removing interior of 2008 hb

27 posts · 5,954 views

centrysisOriginal postohio · Nov 20, 2009#1
does anyone know where to find diagarms on how to remove the interior panels of a 2008 hb. i'm getting ready to put fatmat in,but am having trouble getting the pieces off. i don't want to break anything.

Replies 26

talnlnkySpokane, Wa · Nov 20, 2009#2
Originally Posted by centrysis ↑
does anyone know where to find diagarms on how to remove the interior panels of a 2008 hb. i'm getting ready to put fatmat in,but am having trouble getting the pieces off. i don't want to break anything.
look for screws... if you have all the screws out (if there are any).... then pull till you hear a pop... it's mostly clips that hold the panels in place.... a panel popping tool is handy... but not needed.

Chances are you will break a clip or two... especially if you haven't done stuff like this before.

do a search for "sound deadening" you should get a few hits from people who have taken pics... I know I posted a few about 20 months ago.
H3LlIoNMidatlantic · Nov 20, 2009#3
crutchfield has directions on door panels and rear trim for speakers...

If it's the same as the 09, I have all the body panels downstairs, and I can take pics to show you where the mounting clips are...
centrysisThread starterohio · Nov 20, 2009#4
the last car i did was a '78 regal.that was like 15 years ago.i read all the posts on the sound deadening.sqcomp had alot but he has a sedan.i've been following him and talnlnky on the speakers.my 2nd generation sony explodes(12") have seen the day.i'm starting on the fatmat tonight.eventually i want to get one 12" and custom build a box for the hatch.
CTScottUSA, CT · Nov 20, 2009#5
Originally Posted by centrysis ↑
does anyone know where to find diagarms on how to remove the interior panels of a 2008 hb. i'm getting ready to put fatmat in,but am having trouble getting the pieces off. i don't want to break anything.
Look at the 07 service manual posted in the DIY section of the forum. The interior section of the manual has reasonable instructions for disassembling (or at least diagrams that you can decipher). There really aren't any differences between the 07 and 08, so the 07 guide is fine.

If there are specific areas that you are having trouble with, let us know. I have literally taken apart every single part of the interior.
centrysisThread starterohio · Nov 20, 2009#6
well i managed to get everything from behind the front seats to the hatch out.a little tug and about everything came out and i only busted one clip.the seat belts are a pain.the brackets they're on are kind of flimsy.I'll clean the metal and start putting down mat tomorrow.hopefully.
sqcompBack at home · Nov 21, 2009#7
Post pics. It's a good thing.

Several of us have.
centrysisThread starterohio · Nov 25, 2009#8
here's a couple.i havent gotten around to the fatmat yet.too busy[IMG]Picture not included in this copy[/IMG]
[IMG]Picture not included in this copy[/IMG]
[IMG]Picture not included in this copy[/IMG]
SlickHouston, Texas · Nov 25, 2009#9
I feel dirty looking at those naked yaris pics :) grr baby grr :)
YAR1SRaleigh, NC · Nov 26, 2009#10
Originally Posted by Slick ↑
I feel dirty looking at those naked yaris pics :) grr baby grr :)
hahahaha😆
auxmikeLI, New Yawk · Nov 27, 2009#11
I did that same area without pulling the seats or screrwing around with the seatbelts. Also used 1 layer of FatMat but strictly for road noise.
centrysisThread starterohio · Nov 27, 2009#12
i'm doing mine for road noise and better sound from my stereo.my subs rattle everything and they're realy not that good of subs to begin with
kacWest/Central Illinois · Nov 27, 2009#13
Originally Posted by Slick ↑
I feel dirty looking at those naked yaris pics :) grr baby grr :)
haha. I love the way it looks stripped down. Might strip out some interior on mine sometime, knowing that I will be facing a lot more road noise while it's out...
sqcompBack at home · Nov 28, 2009#14
Slick...

You ARE dirty

:D
SlickHouston, Texas · Nov 28, 2009#15
SQ, aren't we all to some degree? I know you got the chills when you saw your first peek at a yaris in it's birthday suit :) I can't wait to undress mine. :D
YAR1SRaleigh, NC · Nov 28, 2009#16
lol oh god.....
sqcompBack at home · Nov 29, 2009#17
Lol! The chills. I stripped my girl QUICK! I didn't have time for chills. I layed her all day, it was all about the business. Now...she doesn't talk back hardly as much.

...I even used air tools to shut her hup.

It worked in spectacular fashion! ...Here in a week, I'll have worked her over again, this time I'm working the trunk and her back doors. I'll wait on the roof until I get home permanently. I'll even post pictures of all the dirty nastiness! WOOT!

Here's to deadening and foam!
SlickHouston, Texas · Nov 29, 2009#18
I'm interested in your roof removal. I'm afraid of really messing that piece up.
sqcompBack at home · Nov 29, 2009#19
Uness I feel that I have some time...I'll wait until the spring for the drop of the top. I want to drop the liner at the same time I do the a-pillars simply because they almost go hand in hand.

I'll have lots more deadening pictures here in a week. I've gotta get home to strip this girl down again and work her over...errr...yeah.
centrysisThread starterohio · Dec 5, 2009#20
yay.i finally got started on my fatmat.i only got one little section done,but its a start
Picture not included in this copy
Picture not included in this copy
🙂
centrysisThread starterohio · Dec 5, 2009#21
😁got a little more done
Picture not included in this copy
sqcompBack at home · Dec 6, 2009#22
Nice! Now...Foam it.
centrysisThread starterohio · Dec 6, 2009#23
after 10 hours of putting this stuff in my hands look like they were attacked by rabid ferrets.
centrysisThread starterohio · Dec 6, 2009#24
everything fatmatted from behind the doors to the hatch.any recomendation on spray adhesive for the foam
Picture not included in this copy
sqcompBack at home · Dec 7, 2009#25
Yes actually...

Picture not included in this copy

and one of these...

Picture not included in this copy

It makes this...

Picture not included in this copy

into this...

Picture not included in this copy

It works very well and it allows you to place and resposition as needed. Yes, I also know that I put the stock speaker back in. That changes in a few months when I'm done with my deployment. 8.5" mis basses will replace the stock 6".
SlickHouston, Texas · Dec 7, 2009#26
SQ, WTF is "one of these"? That's the third time ive seen that canister. Is it just a pressure can that let's you spray a liquid at high speeds or what? A link or name or something would be helpful to me lol. Common sense clearly dictates that it's used to apply the glue, aside from that, I'm a nub haha
sqcompBack at home · Dec 7, 2009#27
It's a compressed air set up glue pot. It allows a mix between compressed air and the glue to be used through a spray gun for quick dispersion on a larger scale than a spray can.

I've used it for carpeting, vinyl, and foam.

Here's a link for you:

http://www.finishsystems.com/solvent...equipment.html