Yarisworld Archive

My new alluminium grill

19 posts Β· 8,776 views

y75Original postItaly Β· Nov 12, 2009#1
I changed with more patience the stock grill,cost 38€/56$πŸ‘πŸ˜†

2 attachments not included in this copy

Replies 18

2009BBPliftbackWestern PA (Franklin) Β· Nov 12, 2009#2
looks great!
DevilGirlLehigh Valley, PA Β· Nov 12, 2009#3
Originally Posted by kustom play ↑
yea i like it

where did you get it from?
+1
Bob Dogthe Boondocks, NC Β· Nov 12, 2009#4
like the headlights verry much
kimonaHuntington Bch, CA Β· Nov 12, 2009#5
Looks great!
YarisSedanCalifornia - Bay Area Β· Nov 12, 2009#6
Looks really good. Only thing about painted alluminum verses solid black plastic is they tend to chip off over time from road debri etc and then it looks really cheap. You have to touch it up once every couple of months.

What i do is just spray some of the black paint on a q tip and just dab it over the areas where the paint has come off so that way you dont have to take the entire grill off and keep repainting it.

But otherwise looks really good.
AltitudeColorado Β· Nov 12, 2009#7
Looks great. +1 on the where did you get it from?
vboy127Utah Β· Nov 12, 2009#8
πŸŽ‰ I like! +1 more on where you got it. haha, is it custom?
y75Thread starterItaly Β· Nov 12, 2009#9
Originally Posted by vboy127 ↑
πŸŽ‰ I like! +1 more on where you got it. haha, is it custom?
yes is custom, by my self. Is a ready to cut and modelling 33x100 cm.πŸŽ‰
cali yarisCanoga Park, CA Β· Nov 12, 2009#10
can you show a close up of the lower grill? It looks like it has trim around it.

Very nicely done! I bet the top took a lot of time! πŸ™‚
AltitudeColorado Β· Nov 12, 2009#11
Originally Posted by y75 ↑
yes is custom, by my self. Is a ready to cut and modelling 33x100 cm.πŸŽ‰
You should work with Garm (cali yaris) to make some more and sell them in the States! I'd be down for buying one.
y75Thread starterItaly Β· Nov 12, 2009#12
Originally Posted by cali yaris ↑
can you show a close up of the lower grill? It looks like it has trim around it.

Very nicely done! I bet the top took a lot of time! πŸ™‚
yes take a better pic tomorrow,not have a trim around, use the shape of grill bumper the grill is very smooth and confortable for take all shape,Is attach by silicon glue πŸ‘
cali yarisCanoga Park, CA Β· Nov 12, 2009#13
I would be happy to stock some of those.
YarisSedanCalifornia - Bay Area Β· Nov 12, 2009#15
Thats the same stuff you buy at home depot. its like .56 a foot or something like that. You can usually cut it yourself with some really sharp scissors or tin snips.
AltitudeColorado Β· Nov 12, 2009#16
Originally Posted by YarisSedan ↑
Thats the same stuff you buy at home depot. its like .56 a foot or something like that. You can usually cut it yourself with some really sharp scissors or tin snips.
I think that mesh spacing is tighter than what you get at Home Depot. Plus he did an excellent job of forming the mesh to the grill opening so that it's not just a flat piece layed in behind it.
aucoriumSouth Africa Β· Nov 13, 2009#17
that look HOT !!!!
y75Thread starterItaly Β· Nov 13, 2009#18
Thx all!!! :-)
cali yarisCanoga Park, CA Β· Nov 13, 2009#19
Mine is open, with some mesh installed. Cut that grill out of there:

Picture not included in this copy