Yarisworld Archive

What about this Oil Catch Can?

37 posts · 12,528 views

Replies 36

yaris-meAnaheim, CA · Nov 10, 2009#2
In any case, they look nice.👍
rob323Joyner, Brisbane · Nov 10, 2009#3
I wouldn't consider buying a catch can unless you can see what is inside it and how it is baffled etc to help the oil vapour condense. Alot that I have seen have nothing inside at all. Cheap but far from ideal.
1NZYaris1New Zealand · Nov 10, 2009#4
or you could buy the new MicroImage Branded ones , they are baffled
with S/S Wool from memmory 👍, and they are a great price 👍
ParmasThread starterML · Nov 11, 2009#5
Originally Posted by rob323 ↑
I wouldn't consider buying a catch can unless you can see what is inside it and how it is baffled etc to help the oil vapour condense. Alot that I have seen have nothing inside at all. Cheap but far from ideal.
Do you know about a particular brand or one you can suggest that suits me best?
rob323Joyner, Brisbane · Nov 11, 2009#6
Originally Posted by Parmas ↑
Do you know about a particular brand or one you can suggest that suits me best?
No I can't sorry, not one that is readily available over your way anyway. It's just general advice.
I have always made my own to suit the individual vehicle in the past.
ParmasThread starterML · Nov 11, 2009#7
How can I know if the catch can I am seeing is good for my engine?

What Dimensions? LxBxH? Is there a rule to calculate with?

What about fittings dimensions? In, Out & Top?
AltitudeColorado · Nov 11, 2009#8
Originally Posted by 1NZYaris1 ↑
or you could buy the new MicroImage Branded ones , they are baffled
with S/S Wool from memmory 👍, and they are a great price 👍
I checked MI store and can't find them...
cali yarisCanoga Park, CA · Nov 11, 2009#9
^ I can't find them either, must be a hoax. Just kidding, we need to post them up. 👍
cali yarisCanoga Park, CA · Nov 11, 2009#10
Parmas $100 USD is a little steep.

Ray has some for me to post up and I am just getting in some very nice Simotas that will be less expensive than the one you found there.
1NZYaris1New Zealand · Nov 11, 2009#11
Originally Posted by cali yaris ↑
^ I can't find them either, must be a hoax. Just kidding, we need to post them up. 👍
Shit Stirer 🙇 🙇 🙇

And also becuase they are on my Work Bench.
rob323Joyner, Brisbane · Nov 11, 2009#12
Originally Posted by Parmas ↑
How can I know if the catch can I am seeing is good for my engine?

What Dimensions? LxBxH? Is there a rule to calculate with?

What about fittings dimensions? In, Out & Top?
In general, the bigger, the better. The larger the volume, the more room for baffles and the more time the oil vapour has to condense and drop out of the air.
My thoughts on size:
Street car running up to 15 psi - 0.5 to 1 litre in volume.
Street car running over 15 psi - minimum 1 litre in volume.
Race car - 2 litres minimum.
ParmasThread starterML · Nov 11, 2009#13
Originally Posted by rob323 ↑
In general, the bigger, the better. The larger the volume, the more room for baffles and the more time the oil vapour has to condense and drop out of the air.
My thoughts on size:
Street car running up to 15 psi - 0.5 to 1 litre in volume.
Street car running over 15 psi - minimum 1 litre in volume.
Race car - 2 litres minimum.

Are you sure on that 2litres? We are still talking about a yaris right 😆?

I think one litre is enough for a weekend 16psi drag race car right?


Ray has some for me to post up and I am just getting in some very nice Simotas that will be less expensive than the one you found there.
Today 08:33 PM
Will check them for sure if it's a fair price including shipping 🙂
rob323Joyner, Brisbane · Nov 11, 2009#14
Nope, serious. A race (circuit) car (Yaris or otherwise) is probably on boost for at least 50% of the time, compared to a street car which would be lucky to be on boost for 5% of the time. If you are just doing drags, then 1 litre would be heaps.
Do you even have blowby problems in your car or is the catch can just for looks?
AltitudeColorado · Nov 11, 2009#15
Originally Posted by cali yaris ↑
^ I can't find them either, must be a hoax. Just kidding, we need to post them up. 👍
I thought that might be the case...😉
ParmasThread starterML · Nov 11, 2009#16
What do you mean by "blowby"?

Presently the 2 tubes are just disconnected from the top cover. When I check the enginebay I can see some fumes coming from them also on hot idling especially.
cali yarisCanoga Park, CA · Nov 11, 2009#17
I have nothing coming from those open holes, so I didn't put one in. When I go for road racing, probably will at that point.
yaris-meAnaheim, CA · Nov 11, 2009#18
Originally Posted by Parmas ↑
What do you mean by "blowby"?
On the compression stroke, some of the compressed air/fuel mixture escapes pass the piston rings to the crankcase. That's called "blowby." The escaping gas (blowby) is forced up the oil drain channels in the block and forces oil and gas (blowby) out of the PCV, which is what the oil can is for. The oil can captures the oil and allows the gas (blowby) to go to the intake manifold.🙂
1NZYaris1New Zealand · Nov 11, 2009#19
Originally Posted by yaris-me ↑
On the compression stroke, some of the compressed air/fuel mixture escapes pass the piston rings to the crankcase. That's called "blowby." The escaping gas (blowby) is forced up the oil drain channels in the block and forces oil and gas (blowby) out of the PCV, which is what the oil can is for. The oil can captures the oil and allows the gas (blowby) to go to the intake manifold.🙂
🙇👍🙇👍🙇

👏👏👏👏👏👏👏👏:c lap:
1NZYaris1New Zealand · Nov 13, 2009#20
here you go work in progress 👍

contact Garm if interested .

3 attachments not included in this copy

rob323Joyner, Brisbane · Nov 13, 2009#21
Does one of the tubes on top continue down into the can to carry the inward vapours to the bottom of the can so that the vapour has to go through the medium before it travels out of the top of the can back to the intake?
Or does the air just take the easiest route and bypass the medium altogether?
AltitudeColorado · Nov 13, 2009#22
Looking good. Will that steel wool ever need replacing?
1NZYaris1New Zealand · Nov 13, 2009#23
Not at pressent but that is an option , if people want to pay for it 👍
at present the out let is an open air pocket , and the inlet travels through a fine steel wool then into a coarse wool .
The other option is using a oil seperator cone , but again people need to be willing to pay for it .👍
1NZYaris1New Zealand · Nov 13, 2009#24
Originally Posted by Altitude ↑
Looking good. Will that steel wool ever need replacing?
No you should be fine , but as above there is other options .👍
1NZYaris1New Zealand · Nov 13, 2009#25
Originally Posted by rob323 ↑
Does one of the tubes on top continue down into the can to carry the inward vapours to the bottom of the can so that the vapour has to go through the medium before it travels out of the top of the can back to the intake?
Or does the air just take the easiest route and bypass the medium altogether?
Rob i can use these , they are used in paint shops it mounts on the inside
real nice and neat .👍

1 attachment not included in this copy

1NZYaris1New Zealand · Nov 16, 2009#26
Here you go , MicroImage can supply 2 options
the basic catch can with no filters $74.00US shipped (make or supply your own )
or option 2 catch can with 2 filters + a layer of steel wool to stop the oil Bounceing arround
inside the can $97.00US shipped

one other option is also suppling them with 1mtr (3 feet )
of the same color silicon breather tube $18.00US if ordered with the catch can .

these are not on MI's web site yet , and at the moment and are supplied to order only ,
currently have 1 Red and 1 Blue ready 👍

2 attachments not included in this copy

rob323Joyner, Brisbane · Nov 16, 2009#27
How easy is it to blow through those filters with your mouth? Are they going to pose a restriction?
1NZYaris1New Zealand · Nov 18, 2009#28
Originally Posted by rob323 ↑
How easy is it to blow through those filters with your mouth? Are they going to pose a restriction?
Hi Rob , the steel mesh does have a little ( but is ajustable ), but the phosphurs bronze one is a no on restriction that I can feel .
👍
sdyarisSioux Falls · Nov 20, 2009#29
Is the logo a sticker? Can it be removed?
1NZYaris1New Zealand · Nov 20, 2009#30
Originally Posted by sdyaris ↑
Is the logo a sticker? Can it be removed?
Yes the logos for now are stickers , and it has already been removed ,
as it was too big , lol,


just a note Blue Catch can is Sold .
1NZYaris1New Zealand · Nov 27, 2009#31
Updated pictures coming
Kaotic LazagnaCentral Valley, CA · Nov 27, 2009#32
***hehehe, should have been deleted with the spam post.***
tomatoSan Francisco Bay Area · Nov 27, 2009#33
Yup. thanks guys! 🙂
1NZYaris1New Zealand · Nov 27, 2009#34
Originally Posted by Kaotic Lazagna ↑
^ spam?

Really How so, if you have a problem spit it out .
Kaotic LazagnaCentral Valley, CA · Nov 27, 2009#35
Originally Posted by 1NZYaris1 ↑
Really How so, if you have a problem spit it out .
hahahahahahaha. I guess Tomato didn't delete my post, but only deleted the spammer trying to sell DVDs from China.
1NZYaris1New Zealand · Nov 27, 2009#36
Originally Posted by Kaotic Lazagna ↑
hahahahahahaha. I guess Tomato didn't delete my post, but only deleted the spammer trying to sell DVDs from China.
Where they any good , might have been fun to play with 👍
Kaotic LazagnaCentral Valley, CA · Nov 28, 2009#37
Originally Posted by 1NZYaris1 ↑
Where they any good , might have been fun to play with 👍
hehe, I still think this is the best blow up in their face spammer's thread. hahahha

Link to a thread or page that is not in the archive