Yarisworld Archive

WTB: Sway bar end link

11 posts · 6,403 views

thepocheOriginal postMontreal · Nov 10, 2009#1
I stripped the hex key hole on one of my sway bar end link and the dealers want 180$ for a new one.

Anyone has one I could buy or know where I can get one cheaper?

It's scary driving this thing on stock springs and no sway bar 😁

Replies 10

thebarberGrand Rapids, MI · Nov 10, 2009#2
id check the wreckers...

werent able to get it off with an impact wrench?
thepocheThread starterMontreal · Nov 10, 2009#3
The bolt just kept spinning with the nut, even after soaking in wd-40 overnight. I ended drilling through it to take it off.

I'll check the wrecker if I don't find anything here. I don't like going there.
thebarberGrand Rapids, MI · Nov 10, 2009#4
Originally Posted by thepoche ↑
The bolt just kept spinning with the nut, even after soaking in wd-40 overnight. I ended drilling through it to take it off.

I'll check the wrecker if I don't find anything here. I don't like going there.
actually, a friend of mine makes adjustable endlinks for the matrix, i can check to see if they'd work for the yaris...
thebarberGrand Rapids, MI · Nov 10, 2009#5
iirc, they fit...just didnt need them for myself...

I have some adjustable endlinks that I had made up earlier in the year, these pieces are aluminium and Stainless steel units.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

I just noticed that these pictures don't have the jam nuts installed but they do come with them.

Picture not included in this copy
Picture not included in this copy

Thanks to dnm for these pictures of his installed!!!!!!!!

One is right hand thread while the other is left hand thread so when you install them it is easily adjusted simply by turning the center turnbuckle right or left to adjust both endlinks.

Price is 100 plus shipping

PM me on here please

Thanks
thepocheThread starterMontreal · Nov 10, 2009#6
Thats interesting, how can I contact your friend?
cali yarisCanoga Park, CA · Nov 10, 2009#7
mikenacarato was making those as well, but they were quite noisy (clunk clunk) on the Yaris.
thebarberGrand Rapids, MI · Nov 10, 2009#8
Originally Posted by thepoche ↑
Thats interesting, how can I contact your friend?
he's evilthorne on matrixowners.com, newcelica.org, thematrixgarage.com, etc

ill pm you his email though
SabretoothSt Cloud FL · Nov 10, 2009#9
I believe I have another set from my stock struts that came off when I installed my coilovers.
YarisSedanCalifornia - Bay Area · Nov 10, 2009#10
Ill sell you my set of adjustable swaybar links for 75 for the pair plus shipping. Garm is right though they are a tad bit noisey when going over bumps since the heim joints clink a bit sometimes.
barebonedvitzsacramento,CA · May 24, 2010#11
Originally Posted by Sabretooth ↑
I believe I have another set from my stock struts that came off when I installed my coilovers.
ey sabretooth... would you know where can i get Tein ones? the bushings on mine are all cracked... i've checked Tein, and didn't see anything on their site

EDIT:

nevermind.. found some on ebay:

http://cgi.ebay.com/ebaymotors/ws/eB...#ht_500wt_1182