Yarisworld Archive

I got another CEL :(

11 posts · 5,498 views

PHXDEMONOriginal postPhoenix, AZ · Nov 9, 2009#1
Installed the nitto midpipe about 4 months ago and got a CEL. Installed the o2 anti fouler and it got rid of it for about 3 months. Acouple days ago it turned back on 🙁 Anyone else with the Nitto MP have this problem?

Replies 10

severous01SE Texas · Nov 9, 2009#2
get a o2 simulator. if you can't find one i can find you one on the camaro forums.

fill the hole, with a plug, use antiseize. and dont worry about the after cat sensor any more. now if you're talking for the pre-cat sensor...i dont know what to tell you other than to try a new sensor.
hatchbackkid82. · Nov 10, 2009#3
I have the Nitto Mid Pipe with the O2 Anti-Fouler, No CEL for me. I had a problem with the O2 sensor bung, but it was a simple re-weld job. I've had my mid pipe on since June. Do you know what code it's throwing?

Originally Posted by PHXDEMON ↑
Installed the nitto midpipe about 4 months ago and got a CEL. Installed the o2 anti fouler and it got rid of it for about 3 months. Acouple days ago it turned back on 🙁 Anyone else with the Nitto MP have this problem?
thebarberGrand Rapids, MI · Nov 10, 2009#4
check the code.
hatchbackkid82. · Nov 10, 2009#5
+1 you probably didn't tighten your gas cap all the way, happened to me😳 That will throw a CEL
Originally Posted by thebarber ↑
check the code.
PHXDEMONThread starterPhoenix, AZ · Nov 11, 2009#6
I think I may hear a slight exhaust leak. Is it possible for that to throw a code 🤷 I didn't use any washers in between the fittings because there weren't any from the factory. Are you guys using crush washers on your fittings?
PHXDEMONThread starterPhoenix, AZ · Nov 11, 2009#7
Originally Posted by hatchbackkid82 ↑
+1 you probably didn't tighten your gas cap all the way, happened to me😳 That will throw a CEL
Oh man I feel like such a dumbass 😆😆😆 I just popped the door and the cap somehow wasn't even screwed on. Thank you kind sir for helping me pull my head out of my ass 🙇🙇🙇
thebarberGrand Rapids, MI · Nov 11, 2009#8
shoulda checked the code.
PHXDEMONThread starterPhoenix, AZ · Nov 11, 2009#9
Originally Posted by thebarber ↑
shoulda checked the code.
Have no way of checking it. No scangauge and the local checker guy is a douche that won't let customers use the code reader anymore 😠 Anyway I tightened up the gas cap and it is still on. Do I NEED to clear the code or should it go away after a little while 🤷
hatchbackkid82. · Nov 12, 2009#10
😆 It even says it on the gas cap. I think the light should go off if you've re-tightened the gas cap and drive around a little bit. That's what happened to my friends IS250 and the light shut off. If not have someone check the code before you get reset just to make sure👍

Originally Posted by PHXDEMON ↑
Oh man I feel like such a dumbass 😆😆😆 I just popped the door and the cap somehow wasn't even screwed on. Thank you kind sir for helping me pull my head out of my ass 🙇🙇🙇
PHXDEMONThread starterPhoenix, AZ · Nov 13, 2009#11
Originally Posted by hatchbackkid82 ↑
😆 It even says it on the gas cap. I think the light should go off if you've re-tightened the gas cap and drive around a little bit. That's what happened to my friends IS250 and the light shut off. If not have someone check the code before you get reset just to make sure👍
Yep light went off a little bit after filling up my tank 😁