sexOriginal postNY · Nov 8, 2009#1Story:
The rear wiper is a shelf for dirt. During the winter months, I suspect it'll clear snow more effectively by pushing it down instead of bunching it to the side. This took about 30 minutes and is easily reversible.
Tools:
1. 10mm socket - used on wiper arm and motor
2. #2 Phillips screwdriver - used on motor
3. Slotted screwdriver with tape - used to pry trim panel
Procedure:
1. Remove rear wiper arm (refer to service manual pg WW-29).
2. Pop off the back door trim (refer to service manual pg ED-142).
3. Disconnect the white power plug from the wiper motor.
4. Remove the three bolts holding the motor.
5. Remove the four screws off the cover plate.
6. Lift the long arm off the white gear.
7. Rotate the short arm to the left and reconnect the long arm.
8. Reassemble and enjoy.
Replies 42
chongopantsHouston · Nov 8, 2009#2do you have a before and after pics? and what size bolts and what not.... it would be a great how to and you got most of it already here...
chongopantsHouston · Nov 8, 2009#3If you dont want to do it I gotta do mine soon, and I think it would be a good addition to the DIY section.
YAR1SRaleigh, NC · Nov 8, 2009#4Whats the purpose of having the wiper stuck up all the time .......?
PhaetonPort Angeles, Wa · Nov 8, 2009#5I'm with you. I don't see the advantage.
Originally Posted by
YAR1S ↑ Whats the purpose of having the wiper stuck up all the time .......?
chongopantsHouston · Nov 8, 2009#6Im going to remove the wiper myself and have the hole filled, and there are plugs at the hardware store that can be painted that fit right in the existing hole. Or in my case I am gonna have it filled when I have some body work done.
YAR1SRaleigh, NC · Nov 8, 2009#7meh... I'd fill mine in but most of the time I need it to work.... I'd rather have a DIY for intermittent wipers.... which I think we already have one...haha
chongopantsHouston · Nov 8, 2009#8Yeah, i haven't seen anyone with a set that really works properly, to me it feels like an afterthought by toyota, it doesn't even stay on the glass and is noisy... worst feature of the car in my opinion. Plus I am all for weight loss on this car, and thats another 5 or so pounds not needed.
2009BBPliftbackWestern PA (Franklin) · Nov 8, 2009#9I find my rear wiper useful now the one on my scion xb was crap!
chongopantsHouston · Nov 8, 2009#10Well thanks for the input guys but for me I think out is the best for me. I like the look and the weight loss, I count it all now. I am gonna change batteries and a few other things too, the car drives unlike any yaris I have driven. It is loose still but I haven't stiffened the suspension yet.
GideonSunnyvale, CA · Nov 8, 2009#11 Originally Posted by
YAR1S ↑ Whats the purpose of having the wiper stuck up all the time .......?
It doesn't gather dust and dirt when it's sitting that way versus the stock horizontal position. My wiper blade collects a ton of nastiness, I cringe sometimes if I have to use it since it'll spread it over the back window.
sexThread starterNY · Nov 8, 2009#12Added tools and story section. I had reservations about it interfering with my rear view but it's barely noticeable after a few days. Since I live in a dusty area, there's less build-up.
MadMaxSan Antonio, Texas! · Jan 17, 2011#13Just came across the DIY and was wondering if there were any downsides to this mod?
I like it because 1) as stated, crude doesn't build up on the static blade as it does in the stock position and 2) the blade is more efficient pushing water and dirt down off the rear window versus across it!
I plan to give it a try when I get a chance, but thanks for the great instructions!
Cheers! M2
sexThread starterNY · Jan 18, 2011#14It's been more than a year now and my only observations are:
1. The blade conformed to the glass .. doesn't affect function
2. It's hardly noticeable, especially if the rear headrest is up
MadMaxSan Antonio, Texas! · Jan 18, 2011#15So no issues with the blade staying against the glass while driving, i.e. the wind causing it to "chatter" at high speeds or anything....
Honestly, I am surprised that more people don't do this mod. Given the limited rainfall we get here in southcentral Texas, and the vast amounts of dust we have to put up with; this seems like a more practical set-up than stock.
Cheers! M2
KioshiFremont, CA · Jan 18, 2011#16I got the idea from looking at Vitz in Japan.
It won't chatter at all, MadMax.
Also, gives confusion to people as to why the arm is stuck at that position (whereas we know, its still functional).
i wish i waited and followed this DIY. I'll forward this to another member who i tried to help, but couldnt get the wiper to set in at that angle...
Midnight DrifterMonroe, NJ · Jan 19, 2011#17 Originally Posted by
YAR1S ↑ Whats the purpose of having the wiper stuck up all the time .......?
Snow/ice won't pile up on the wiper like that. I like the idea. Now, could you show us how to use a regular/replaceable auto parts store blade instead of that proprietary piece of junk? <.<
ezhacker1San Francisco · Jan 24, 2011#18Remember to wear workgloves, the sheet metal there is crazy sharp, kioshi knows firsthand doing this mod. I wore leather gloves while working on it.
Only downside I think is to trying to clean the window with the washer fluid, gotta time spray. Doesn't bother me too much
jpmck03USA · Sep 18, 2011#19For everyone that has done this... Are there any tricks to removing the back door trim? All the repair manual says is
4. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
(a) Using a screwdriver with its tip wrapped in
protective tape, slide the handle plate of the back
door trim board to disengage it.
(b) Disengage the 3 claws and 9 clips and remove the
back door trim board.
With this illustration:
Picture lost · yarisworld.com
I'm guessing that you just remove the little handle plate, then slowly pull the whole thing off (similar to other interior trim pieces, e.g. radio trim, A/C trim, etc.).
That sound about right?
Figure it might be a little easier to ask ahead of time instead of standing there looking at the panel and going, "hmmm?..." while scratching my head.
sexThread starterNY · Sep 20, 2011#20No tricks. I just went around the edges and pulled straight where I felt a clip. It did take more pull than I originally thought since I didn't want to break any clips
jpmck03USA · Sep 20, 2011#21 Originally Posted by
sex ↑ No tricks. I just went around the edges and pulled straight where I felt a clip. It did take more pull than I originally thought since I didn't want to break any clips
Thanks,
sex! (Great user name, by the way!) I figured it was as easy as it sounded: just pull it off. Just didn't want to rush it and break a bunch of clips.
Betriventedmonton · Sep 20, 2011#22Hm, I may just do this when I have time this week! Props.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 21, 2011#23 Originally Posted by
sex ↑ It's been more than a year now and my only observations are:
1. The blade conformed to the glass .. doesn't affect function
2. It's hardly noticeable, especially if the rear headrest is up
are you still able to use the wiper arm cap? To me it looks crappy without it.....
Klink10910 · Sep 21, 2011#24^^^^ Yes I would like to know also. As it appears the arm looks a bit tweaked.
StoveTigard Oregon · Sep 23, 2011#25My car budget is limited right now so I'm going after all the free/inexpensive mods. I did this one tonight. I probably should have followed the advice about wearing gloves.
Originally Posted by
ROCKLAND TOYOTA ↑ are you still able to use the wiper arm cap? To me it looks crappy without it.....
Originally Posted by
Klink10 ↑ ^^^^ Yes I would like to know also. As it appears the arm looks a bit tweaked.
My wiper arm cap still fits. The wiper arm is still in its normal zone of travel, it just stops in a different spot. I'll post up some pics tomorrow.
Klink10910 · Sep 23, 2011#26Yep I understand about budget constraints. Have you done the one that modifies that cap that we are talking about allowing you to flip the arm all the way from the glass?
StoveTigard Oregon · Sep 23, 2011#27 Originally Posted by
Klink10 ↑ Yep I understand about budget constraints. Have you done the one that modifies that cap that we are talking about allowing you to flip the arm all the way from the glass?
The wiper arm cap mod was the first mod I did shortly after getting the car.
In the new stopped position the arm is slightly off angle from the cap but it isn't very noticeable unless you are looking for it.
Pics of the wiper with the cap on.

Klink10910 · Sep 23, 2011#28You know with the MI decal and the way the arm lines up.....it isn't that bad looking.
ilikericesavannah, ga · Sep 24, 2011#29I like this mod. straw from pine trees always get stuck in my wiper blades. I may plan to do this eventually
ATL_Want_A_PabstAtlanta, Ga. · Sep 24, 2011#30Nice DIY! Did it. Love it. Easy and free. Looks sweet too! 25 minutes tops.
jpmck03USA · Sep 24, 2011#31Got this done this afternoon and still had time to mow the lawn. What a productive Saturday afternoon! Like Stove mentioned, the end cap angle is off a little bit when the wiper is stopped, but it's not noticeable at all.
About the filth: yesterday it rained while I was driving back home from school, so it was really easy to line up the wiper blade with the new vertical stop position. And it illustrates the purpose of the mod... just imagine all that dirt and crud being wiped across your window instead of being pushed down and away from it! So, yeah, my car's dirty, but that dirt served its purpose. 😆
Picture lost · www.yarisworld.com
Picture lost · www.yarisworld.com
Now to wash the car!
Betriventedmonton · Sep 25, 2011#32I did mine today, and yes having a line of dirt to align your new standing position to is very, very useful :)
pennyracergrants pass · Nov 28, 2013#33cool idea if you want to see the wiper arm every time you check your rear view mirror . but i agree about the dirt , snow wiper arm acts like a shelf for all the crap that get stirred up while driving i want to pull the whole unit off but cant find a nice looking hole cover
MadMaxSan Antonio, Texas! · Nov 28, 2013#34There are many cars that have the wiper positioned as it is in this mod, so I doubt there's much obstruction...
jpmck03USA · Nov 28, 2013#35 Originally Posted by
pennyracer ↑ cool idea if you want to see the wiper arm every time you check your rear view mirror . but i agree about the dirt , snow wiper arm acts like a shelf for all the crap that get stirred up while driving i want to pull the whole unit off but cant find a nice looking hole cover
Having the wiper arm up is probably less of an obstruction than a window that you can't clear off at all... 😛
pennyracergrants pass · Nov 28, 2013#36i cant say i have seen any stock rides with the wiper straight up. hell i don't even use mine i don't like the port hole look after the dirt is only cleared ware the wiper touches the glass i don't live ware severe winter weather is normal
ex-x-fireSheboygan Falls, Wi. · Nov 28, 2013#37It seems like the defroster grid would keep the blade free from ice build up when its in the up position.
MadMaxSan Antonio, Texas! · May 26, 2014#38Dear God, it's been three years since I last posted in this thread and I've still yet to do this mod! 😎
The wife and I went to early vote last week and I saw a Yaris hatchback in the parking lot that had this mod done, which got me to thinking about it again. Given how much dust there is in south-central Texas, this seems like it would be something good to do. We recently had some heavy rain and as usual, my rear wiper was near useless because it spends 99% of its time being blasted by intense heat and crap building up on it.
So I'm gonna try and get this done this week. I just had Sprocket in my garage working on my headlights and doing a few other minor maintenance items, I wish I had thought about this beforehand as it would have been a great opportunity to do this. I can probably do it outside but given that all my tools are in the garage, it's much easier; I just have to move the Jeep out and bring the Yaris in.
Cheers! M2
BobTheYarisUnited States · Jun 1, 2014#39Just found this the other day and did it Saturday. Loving the look and it seems to work great, just waiting for some rain to see how it really works.
Sent from my iPod touch using Tapatalk
LarsGermany · Jun 2, 2014#40Hi guys,
I'd love to try this one! Can anyone link to the service manuals mentioned, or provide with quick instructions on how to perform those steps that refer to the manuals?
Thanks!!
bronsinnj · Jun 2, 2014#41I think the blade will likely last longer in the up position too.
LarsGermany · Jun 6, 2014#42Gentlemen,
I'd like to warn you about a little problem that I encountered while doing this mod...
If you find a rear wipe electric motor that has torx screws on the cover plate... just give up and go home.
As you can see in the screenshot attached, there are no other slots/holes where you can mount the long arm. I stared at the thing for about 15 minutes to try and figure out a way of still doing the mod somehow... the only way I could think of was to "rotate" the shiny metal circle on the white wheel, but even the holes where that metal circle are fixed are assymetric... it's only meant to be assemble one way...
Very disappointed, I reassembled everything as it was...
vivalaflamGreece · Oct 17, 2018#43 Originally Posted by
Lars ↑ Gentlemen,
I'd like to warn you about a little problem that I encountered while doing this mod...
If you find a rear wipe electric motor that has torx screws on the cover plate... just give up and go home.
If only I visited the second page earlier... Seems that European Yaris uses this Bosch motor and can't be modded. Maybe if we ordered an american wipe motor it'd work?