jounaOriginal postbayamon puerto rico · Nov 6, 2009#1i have a 1zz engine. with the ecu with everything to swap it to my yaris but would this engine performe better than the 1nz?
can i use my transmission with it? and if so what do i have to do?
this is 4 real all i need to know is if its worth it cuz there are alot of performance parts 4 this engine like cams n pistons n other stuff we don't have
Replies 12
ddongbaphay · Nov 7, 2009#2If you're ONLY getting the TB, I wouldn't say its worth it. You'll probably get a slightly better response from the engine, but thats about it.
cali yarisCanoga Park, CA · Nov 7, 2009#3I think he's talking about a full motor swap. Not worth it, in my opinion.
06silveryarisPuerto Rico · Nov 7, 2009#4If you already have the motor I say do it, in PR finding a tranny for that engine should be no problem and someone to make the mounts either.
SabretoothSt Cloud FL · Nov 7, 2009#5PR is the land of crazy swaps, I am sure you can get it done for a set of subwoofers and a bag of rice.
JK
Good luck though, there was a guy down there who already has a 2zz swap, he might be a good guy to find if you are looking to do a 1zz, pending the motor mounts are similar, he might already know how, or know a guy that has experience doing them.
06silveryarisPuerto Rico · Nov 7, 2009#6 Originally Posted by
Sabretooth ↑ PR is the land of crazy swaps, I am sure you can get it done for a set of subwoofers and a bag of rice.
JK
Good luck though, there was a guy down there who already has a 2zz swap, he might be a good guy to find if you are looking to do a 1zz, pending the motor mounts are similar, he might already know how, or know a guy that has experience doing them.
BTW you forgot the beans
why?harnett county NC · Nov 7, 2009#7That would be interesting. But worth it? What else do you plan to do to it? And what can you really get out of it? In my mind, putting something like a 4G63 or a 3SGTE would be more practical plus have a much higher ceiling.
ddongbaphay · Nov 8, 2009#8HAHAHAH OMG IT IS AN ENGINE SWAP. LOL
ddongbaphay · Nov 8, 2009#9It seems as if the bottom end of a 2zz and 1zz are the same. If you were to get a 1zz, you could get the 2zz head + harness + ecu and make that thing work.
jt258HOUSTON · Nov 9, 2009#10If you decide to do the swap you could make that car a serious contender i say go for it. that car would be a monster with a full build up. thats just my opnion.
thebarberGrand Rapids, MI · Nov 9, 2009#111zz and 2zz swaps require cutting the frame on both sides to fit the engine and transmission
the 1zz and 2zz both have front engine mount of which the yaris has none, so you'd also have to fabricate a cross memeber in the front to carry the front mount of the engine
jounaThread starterbayamon puerto rico · Nov 9, 2009#12i plan to do a couple of things to the engine like a full race head with cams and everything high comp. pistons 2 and i think i'll go with microtech or with the V-manage to tune it ive seen a few 1zz putting almost 200 n/a and since there are few mods for the 1nz thats why im thinking of the swap i have the guys to do it. and i found a six speed xrs tranny..
YarisPRMayaWest, Puerto Rico · Nov 10, 2009#13 Originally Posted by
jouna ↑ i plan to do a couple of things to the engine like a full race head with cams and everything high comp. pistons 2 and i think i'll go with microtech or with the V-manage to tune it ive seen a few 1zz putting almost 200 n/a and since there are few mods for the 1nz thats why im thinking of the swap i have the guys to do it. and i found a six speed xrs tranny..
No montes la tranny de XRS, estas en MechTech y sabes lo mucho q rompen!!