Yarisworld Archive

Penguin Spacer fitment Q...

9 posts · 3,956 views

XYarisOriginal postNYC · Nov 4, 2009#1
Im running 205/40/17 on 17x7 rims (+40 offset) and Im lowered on TRD springs. Any fitment issues running 13mm Penguin spacers? What if I elect to use 205/45/17 in the future for more sidewall?

Thanks

Replies 8

Nexus1155Dorchester · Nov 4, 2009#2
i have pretty much the same setup on DF210s i scrape a little bit, you should be fine, but i think some scraping is going to happen regardless anyways on your suspension setup too?
TamagoOff Grid · Nov 4, 2009#3
Originally Posted by XYaris ↑
Im running 205/40/17 on 17x7 rims (+40 offset) and Im lowered on TRD springs. Any fitment issues running 13mm Penguin spacers? What if I elect to use 205/45/17 in the future for more sidewall?

Thanks
width causes rubbing, not height.

you'll rub on the passenger side first. yarii are crooked from the factory
XYarisThread starterNYC · Nov 4, 2009#4
So I will rub? What about 10mm? is this a definite thing either way with 205's?
Penguin GarageFL · Nov 4, 2009#5
if you're nervous about rubbing go with the 10mm.
XYarisThread starterNYC · Nov 4, 2009#6
cool, thanks
YarisSedanCalifornia - Bay Area · Nov 5, 2009#7
I have 205/55/15s with trd springs and 10mm hub spacers i rub very very rarely. Just barely nicks the outer edge of the tire.
yarisugiハワイ · Nov 16, 2009#8
Bringing back an old thread... So the rear is about 3mm toward the passenger side?
I have another question. (I haven't installed spacers yet) If I can't get the toe perfectly
straight with the car, is it better to have the rear a bit toe-in or toe-out?

btw, when did Penguin Garage pull out of being a vendor?
I wanted to read some of the threads from PG, but it's no longer available.
TamagoOff Grid · Nov 16, 2009#9
you need to talk to Yaris Bueller about his deletion of penguin garage's threads..

all PG parts are currently sold EXCLUSIVELY through www.microimageonline.com

and you want toe - in for safety, toe-out (or neutral toe actually) for improved turn-in.