Yarisworld Archive

Hood in production

51 posts · 12,525 views · page 1 of 2

cali yarisOriginal postCanoga Park, CA · Oct 29, 2009#1
The winning design from the Micro Image hood contest is now in production phase. These will be available for purchase within 4-6 weeks, in primered fiberglass. Carbon Fiber is also a possible (and more expensive) option.

Target introductory price will be $300 or less.

Picture not included in this copy

Replies 50

kacWest/Central Illinois · Oct 29, 2009#2
i dig it.
frownonfunRGV, Texas · Oct 29, 2009#3
merry christmas to me!!!
squall_xSan Diego · Oct 29, 2009#4
Very good news! and yes merry christmas to us!!!
chongopantsHouston · Oct 29, 2009#5
Rock, sign me up for one!
fmicleSan Jose, CA, USA · Oct 29, 2009#6
Whoa 🤤 are there any "close-up" pictures? I'm curious if there are any other vents on the hood other than the one in the middle?
RacerFreakXXXSomers NY · Oct 29, 2009#7
wow... I didn't think you were actually going to make it
1NZYaris1New Zealand · Oct 29, 2009#8
DID I MENTION I HATE YOU 😢


🤣



frownonfunRGV, Texas · Oct 29, 2009#9
Originally Posted by fmicle ↑
Whoa 🤤 are there any "close-up" pictures? I'm curious if there are any other vents on the hood other than the one in the middle?
i'm pretty sure that pic is a photoshop so no close up really available. so what you see is what you get as far as i know. no other vents.
TinyGiantRochester, NH · Oct 29, 2009#10
good thing I have a hood or i would have a renewed hatred for the HACK. lol
SabretoothSt Cloud FL · Oct 30, 2009#11
I like it...I must see finished product on a car before I commit though. Design is kickass though
cali yarisThread starterCanoga Park, CA · Oct 30, 2009#12
It's CTScott's design. It's a forward-facing recessed scoop, a little bit of a nod to the Celica. Final details will be worked out on the prototype. I'll post up working pics as we go along, feedback is always welcome. So is encouragement, LOL.

Pretty sure we are going with just the one opening. A nice detail is that a parked car won't get too wet under the hood like existing vented designs do (including the one on my car).
fmicleSan Jose, CA, USA · Oct 30, 2009#13
So all that air that goes in through the vent, where does it get out? 🤷
RedRideMiddletown, NY · Oct 30, 2009#14
Originally Posted by cali yaris ↑
It's CTScott's design. It's a forward-facing recessed scoop, a little bit of a nod to the Celica. Final details will be worked out on the prototype. I'll post up working pics as we go along, feedback is always welcome. So is encouragement, LOL.

Pretty sure we are going with just the one opening. A nice detail is that a parked car won't get too wet under the hood like existing vented designs do (including the one on my car).
Is the scoop raised at all or, is it just recessed?

BTW, My other car is a silver '02 Celica with a "C-One" style raised scoop that I installed.

A scoop can change the whole personality of a car and balance out the styling. 🙂
808_YarisHI · Oct 30, 2009#15
i'm just curious...what would the vent look like for the scoop?
cali yarisThread starterCanoga Park, CA · Oct 30, 2009#16
I would like to see the scoop half raised, half depressed, that will give the line of the hood some character. But we'll see when we have more than one photoshopped pic!

808, I think you mean what mesh would go in the scoop by "vent"? Don't know that yet but it will be black.
cali yarisThread starterCanoga Park, CA · Oct 30, 2009#17
fmicle, air will escape below the motor, as it does with forward-facing scoops.

The Kaminari reverse-cowl (and similar designs) directs the air OUT the vent, forward scoops direct the air IN, just to be clear.
KCALB SIRAYVirginia · Oct 30, 2009#18
Originally Posted by cali yaris ↑
I would like to see the scoop half raised, half depressed, that will give the line of the hood some character. But we'll see when we have more than one photoshopped pic!

808, I think you mean what mesh would go in the scoop by "vent"? Don't know that yet but it will be black.
The "Hex" mesh would look great and follow the front grill nicely👍
CTScottUSA, CT · Oct 30, 2009#19
Originally Posted by cali yaris ↑
It's CTScott's design. It's a forward-facing recessed scoop, a little bit of a nod to the Celica. Final details will be worked out on the prototype. I'll post up working pics as we go along, feedback is always welcome. So is encouragement, LOL.

Pretty sure we are going with just the one opening. A nice detail is that a parked car won't get too wet under the hood like existing vented designs do (including the one on my car).
With the height difference between the bottom and top of the hood, it should be possible to have the bottom of the scoop angled slightly towards the bumper, so that water drains down the bumper, rather than entering the scoop when the car is parked.
cali yarisThread starterCanoga Park, CA · Oct 30, 2009#20
^ 👍 agreed!
AltitudeColorado · Oct 30, 2009#21
I like it. It suits the car very well. Eager to see a pic of the real deal.
justjesusOrange County · Oct 30, 2009#22
yeah, that's sort of what I had in mind for my design as well.
Sweet. Keep it going Garm!
slothman86Savannah, GA · Oct 30, 2009#23
that is made of sex! I really wanted to buy a WRX hood scoop and throw it on the yaris. Looks like I don't have too...now!
chongopantsHouston · Oct 31, 2009#24
well put me down for one, seriously when they are ready PM me.
schleppyBoston, MA · Oct 31, 2009#25
I'll hold my order until I see some final pics :D
german yarisGermany · Oct 31, 2009#26
Looks very nice, when i would drive a new Yaris I would buy one..... For my Yaris I found nothing....
LtNoogieWest Hills, CA · Oct 31, 2009#27
I want to remove heat from the engine bay, especially near where the AFE filter sits. I've removed the heat box around the AFE filter for various reasons. Which design would work better?

A forward facing scoop or a reverse facing vent? I decided that I do not want to poke a hole in my front bumper to force cooler air in.
CtrlAltDefeatIndianapolis IN · Oct 31, 2009#28
I wonder if a forward facing vent would increase lift in the front. It seems it would direct air down past the engine and under the car. I think a rear vent (like the Kaminari reverse cowl hood) would direct air up and over the car, increasing downforce in the front where it's needed..
chongopantsHouston · Oct 31, 2009#29
i know i am not the only one that has thought this, what about porting the vent directly to the intake filter? I am from the old school of cars, dont know if these can handle that. Basically a ghetto ram air. lol
frownonfunRGV, Texas · Oct 31, 2009#30
i'm sure one could always construct a funnel of some kind directing air to the intake. ghetto is what it would be though, yes. course no one will see it unless you open the hood.
RedRideMiddletown, NY · Oct 31, 2009#31
Originally Posted by CtrlAltDefeat ↑
I wonder if a forward facing vent would increase lift in the front. It seems it would direct air down past the engine and under the car. I think a rear vent (like the Kaminari reverse cowl hood) would direct air up and over the car, increasing downforce in the front where it's needed..
In the Yaris, I don't think it would be an isue. It is only an econobox and the little (if any) negative downforce woud not be noticable.

When I installed my raised scoop on my Celica, the owner of the body shop (who painted it) raised the same concernns but, it has proved not to be a problem at all even at very high highway speeds.
chongopantsHouston · Oct 31, 2009#32
yeah but if I made a custome kick ars funnel, would it actually make a diff you think? It is much cooler air and a LOT more of it/
frownonfunRGV, Texas · Oct 31, 2009#33
Originally Posted by chongopants ↑
yeah but if I made a custome kick ars funnel, would it actually make a diff you think? It is much cooler air and a LOT more of it/
idk. seems like it would make a difference.
chongopantsHouston · Oct 31, 2009#34
Kewl, I will send pics if I do it. Which I will if I get this hood. :)
slothman86Savannah, GA · Nov 20, 2009#35
Time for a top mounted intercooler! BTW, I soooooooooooooooooo want this!
JumpmanYarisSO. INDIANA · Nov 20, 2009#36
Nice product, leaving the sedan out?🙁
cali yarisThread starterCanoga Park, CA · Nov 20, 2009#37
^ yes. Not enough buyers to warrant design and production. I do have a very cool new vented hood coming for the sedans though.
JayTee09Houston, Texas · Nov 20, 2009#38
^Garms been talkin about getting some custom CF hoods from overseas checkout AEimpex.com and then go bug garm ALOT until he gets em. heheh 😁

edit: HAHA you beat me to it
cali yarisThread starterCanoga Park, CA · Nov 23, 2009#40
That's pretty close.
az_saguaroU.S. AZ · Jan 6, 2010#41
Bump...

What ever happened with this hood? Are they still in production?
jaytownCosta Mesa, CA · Jan 6, 2010#42
Niice, I like. How much is for carbon?
cali yarisThread starterCanoga Park, CA · Jan 6, 2010#43
yes, this is in production. dont have a cost for cf yet
MeadLBC · Jan 6, 2010#44
is it gonna be a funtional vent? putting a hole in the hood is not as easy as it sounds, things get wet = steam coming out = visibility issues, electrical shorts... anyone aware of where our plug wires and battery is located???
cali yarisThread starterCanoga Park, CA · Jan 6, 2010#45
Yes, the vent will be functional, and placed as shown. I'm well aware of where the wires and battery are located on the Yaris.

I've never heard a Celica owner (which has a very similar vented hood configuration) complain about steam coming out, much less steam causing visibility issues.

I have a Seibon hood with a very large vent, and there are no issues with rain and steam, or electrical problems of any kind.

Motors get steam cleaned, right? 🙂
slothman86Savannah, GA · Jan 6, 2010#46
This is really exciting! Is there a production timeline?
macks_yarisphilippines · Jan 7, 2010#47
do u guys know the part no of the rubber thing under the front bumper
MeadLBC · Jan 7, 2010#48
Originally Posted by cali yaris ↑
Yes, the vent will be functional, and placed as shown. I'm well aware of where the wires and battery are located on the Yaris.

I've never heard a Celica owner (which has a very similar vented hood configuration) complain about steam coming out, much less steam causing visibility issues.

I have a Seibon hood with a very large vent, and there are no issues with rain and steam, or electrical problems of any kind.

Motors get steam cleaned, right? 🙂
Thanks,

hmmmm, I'm kinda convinced... but I'll need a free production sample to test fitment and durability, CF perferred 🙄
advocatelocation · Jan 8, 2010#49
If I ever saw this hood on my car in CF i'd probably need a new pair of underwear afterwards.
MistryWhere Only Yaris' Can Go · Jan 8, 2010#50
^ LOL!