Yarisworld Archive

boutton Engine Start

23 posts · 11,743 views

yarismoOriginal postalgeria · Oct 26, 2009#1
hi, I am trying to install an "Engine Start" button on my Yaris HB, but I don't know how to remove the steering wheel cover, and the wiring method..please help

thnx ! شكرا

Picture not included in this copy

Replies 22

CTScottUSA, CT · Oct 26, 2009#2
Did you buy the complete OEM kit, or one of the ebay kits?
schleppyBoston, MA · Oct 27, 2009#3
Where can one buy the complete OEM kit?
CTScottUSA, CT · Oct 27, 2009#4
Originally Posted by schleppy ↑
Where can one buy the complete OEM kit?
I don't think you can actually buy it as a kit, but you could purchase all of the OEM parts needed.
schleppyBoston, MA · Oct 27, 2009#5
Originally Posted by CTScott ↑
I don't think you can actually buy it as a kit, but you could purchase all of the OEM parts needed.
Part numbers? :D
CTScottUSA, CT · Oct 27, 2009#6
Originally Posted by schleppy ↑
Part numbers? :D
Too many to dig through the EPC to list. The list includes the push button switch, solenoid for the steering lock, ECU and receiver for the smart card, etc.

All of which would have to be imported from another market.
Sparks Toyota-TRDMyrtle Beach, SC · Oct 27, 2009#7
Send me your email and I can get you the information you are looking for!


Tim
1NZYaris1New Zealand · Oct 27, 2009#8
How about this 👍
Chrome gear knob, enhanced with engine starter button. Once installed you simply turn your key to on position and press the starter button on the gear knob to fire up your engine.

Universal fit, supplied with all wiring and relay box required for installation on a 12 volt negative earth vehicle. Also includes a range of adaptors to suit most gear shift shafts.

1 attachment not included in this copy

CTScottUSA, CT · Oct 27, 2009#9
Originally Posted by Sparks Toyota-TRD ↑
Send me your email and I can get you the information you are looking for!


Tim
Tim,

Can you order parts for other markets?
Sparks Toyota-TRDMyrtle Beach, SC · Oct 28, 2009#10
I unfortunately cannot get parts from other markets, but I can give you guys the How-To's on removing the interior. :D


Tim
battleversiontc808 · Oct 28, 2009#11
push button starts are normally a split in between the starter wire so if you can llok for a wire refrence guide to find starter wires thats how i wired my s2000 push button start
yarismoThread starteralgeria · Oct 28, 2009#12
can anyone post some pictures on how to do the wiring for that button?
CTScottUSA, CT · Oct 28, 2009#13
Originally Posted by yarismo ↑
can anyone post some pictures on how to do the wiring for that button?
We need some more information to help you.

Did you buy just the button, or is it a kit that also includes one or more relays?

Did you receive any documentation with the button?
yarismoThread starteralgeria · Oct 28, 2009#14
actually, I have only the button, no documentation.
I wanna make a general idea about what I will find under the cover and the wiring before I open it!
CTScottUSA, CT · Oct 28, 2009#15
Originally Posted by yarismo ↑
actually, I have only the button, no documentation.
I wanna make a general idea about what I will find under the cover and the wiring before I open it!
OK. If it is just the button and you don't want to open the package yet, can you tell how many wires come out of the switch?

If the switch is just a momentary switch, then you could just hook it up between the gray wire in pin 5 and the black wire in pin 7 of the keyswitch connector. The only problem would be if you accidentally hit the switch once it was running, you would grind the starter.
THE ONEGT · Oct 28, 2009#16
OK, I don't know if this helps, but anyway... I found this cool site where they have a lot of DIY's, and one of those tells you how to install the ingnition button step by step, with pics and everithing. 👍

http://www.instructables.com/id/Push...-for-your-Car/

Hope it is of some use...

*NOTE: You still have to use your keys to start your car.
yarismoThread starteralgeria · Oct 28, 2009#17
the link you gave doesn't work for me !!!

* the "cover" that I mean is not the package, I mean the plastic parts that covers the steering wheel
CTScottUSA, CT · Oct 28, 2009#18
Originally Posted by yarismo ↑
the link you gave doesn't work for me !!!

* the "cover" that I mean is not the package, I mean the plastic parts that covers the steering wheel
That link is really not directly applicable. Can you snap a picture of the back of the switch with the wires and of any documentation that came with it?
THE ONEGT · Oct 28, 2009#19
Originally Posted by yarismo ↑
the link you gave doesn't work for me !!!

* the "cover" that I mean is not the package, I mean the plastic parts that covers the steering wheel
Oh... alright...

Will see if I find something....
yarismoThread starteralgeria · Oct 28, 2009#20
it is something like this with two wires
Picture not included in this copy
YarizSE Texas · Apr 18, 2010#21
Why do I need a kit? Shouldn't I be able to just do it with a momentary push button and some wire?
IsLNdbOiLas Vegas, NV · Apr 19, 2010#22
What's the point if you still have to put the key in and turn it?
YarizSE Texas · Apr 19, 2010#23
Originally Posted by IsLNdbOi ↑
What's the point if you still have to put the key in and turn it?
Maybe you do, but for me its just part of a custom bluetooth proximity starter. 👏