BurningSkyOriginal postUK · Oct 24, 2009#1Replies 21
drew113087Concord · Oct 24, 2009#2jl audio also makes some slimlines.... the 13tw5
sqcompBack at home · Oct 24, 2009#3There are several different ways to approach your goal.
My experience is to say that you should spend the majority of your budget on the installation rather than equipment. Personally I don't enjoy sniping at brand vs brand posts. It never really pays off. It is much like the Chevrolet versus Ford arguments.
What is your budget? How much space are you willing to give up? What brands are YOU comfortable with?
You seem to be looking at the fire and forget type of woofer enclosures. You might also look into Bazooka/SAS for more options.
I see that the cheapest you're looking at is right around $195 American. As I'm remembering, I think I can hook up with a nice little PB ASA 400.2 amp for around $115 (that'll give you potentially 400 Watts), perhaps a lower end 12" like the PB PS12 for $40. Perhaps, $50 more for the MDF, carpeting, wiring, fusing, screws, silicone...I can make my own sealed or vented enclosure that would rock. We've spent $155...a litle elbow grease and you can save some SERIOUS money!
I'm sure Taln has a slight alternative he could come up with for around $150 on up...
Honestly, space seems to be a premium concern here. What are you willing to give in the way of space? This space issue will help determine your budget. Are you willing to make an enclosure yourself?
Here's an example of oh...perhaps $25 of MDF and one's own labor:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Yeah, I know it's not a $40 woofer. Add another zero and you'd be closer. Still, the point isn't about the amount you spend on the woofer itself. Hand me that $40 woofer and concentrate on the enclosure. If you're willing to spend an afternoon, $25 worth of MDF will go a long way. It's a reconstruction of a home audio type of downfiring enclosure for a vehicle. Nice little 1 1/2" front baffle with the plate hiding the mounting screws. Oh, also sorry for the incomplete pics. As I remember, my camera's battery died on me in the middle of that enclosure construction. While not being what you want for your Yaris, the point is about you spending time on this yourself and saving a few $$.
uncleyarisToronto · Oct 24, 2009#4Remember that a box could come out if the space was needed. A proper box, Ported or not will give greater results IMO. I have a Kaption box which isin't to big, but rocks. It can come out if I ever needed the space that badly.
BurningSkyThread starterUK · Oct 24, 2009#5space is the key really, id be willing to raise the boot floor to around the hight of the tailgate but the lower the better really. my limit on price would probably be around £200-250 at a push which is about $330-410 at current rates but $150 sounds A LOT nicer ;-) can spend the extra money on other stuff then.
as for brand that is the main reason for posting here. I dont know anything when it comes to car speaker brands, but Im more than will to use unbranded speakers so long as i know someone thinks they are good.
I would be willing to build the enclosure myself, love a bit of DIY, but I would need to get advice on that as I know anything about the does and donts of such a project.
BurningSkyThread starterUK · Oct 24, 2009#6ive seen the word 'ported' a lot in reference to subs, at risk of showing how little i know what does ported mean and what does it 'do'?
drew113087Concord · Oct 24, 2009#7 Originally Posted by
BurningSky ↑ ive seen the word 'ported' a lot in reference to subs, at risk of showing how little i know what does ported mean and what does it 'do'?
ported=louder, sometimes slightly less accurate reproduction, and normally means bigger enclosures. A sealed enclosure will leave more boot space
uncleyarisToronto · Oct 24, 2009#8The box has a port(hole), rather than sealed. Ported boxes are bigger.
BurningSkyThread starterUK · Oct 24, 2009#9ah ok, in that case Im probably not looking for ported, I assume a low (in height) sub wouldnt be ported? or am I thinking to literally? I know a box could be removed but id prefer to have something I can just leave in rather than remove when i take me and my housemates shopping if that makes sense.
Anyone know measurements etc of a yaris boot (2001)? Might make a 3D model to see what kinda heights I can achieve and how it would look.
sqcompBack at home · Oct 24, 2009#10Yeah...Vented enclosures take up a bit more space than sealed for the most part. With sealed you'll be looking at needing a bit more power to kick the woofers to the same output. Still, you'll have a nice, easy to build, clean sounding enclosure.
As for raising the boot...why not make something off to the side? You can put terminals on it to detatch easily.
RUFFSTUFFKINGSLAND, GA · Oct 24, 2009#11Get an Infinity BassLink.
sqcompBack at home · Oct 25, 2009#12That's another option that is fairly popular.
mr9865Green Bay WI · Oct 25, 2009#13BMT
BurningSkyThread starterUK · Oct 25, 2009#14whats BMT? am googleing Infinity BassLink now.
on ported. does the port need to be in any particular location i.e. behind the speaker etc? side pods do also sound like a good option. which do you think would produce the better outcome?
BurningSkyThread starterUK · Oct 25, 2009#15which basslink system do you guys recommend? standard, 2 or t?
RUFFSTUFFKINGSLAND, GA · Oct 25, 2009#16I have this one in my Expedition and it great... In the Yaris I think it would sound sick... Plus I bought mine from Harmon Kardon and it only set me back $130. Of course it's not for impressing the people on the street with your music.
http://www.infinitysystems.com/car/p...=US&Region=USA BurningSkyThread starterUK · Oct 25, 2009#17you think the original is good enough? dont need 2 or t for a good sound? everything is so cheap in the states! cheapest ive found the original for over here is £150 which is around $250 :-(
RUFFSTUFFKINGSLAND, GA · Oct 25, 2009#18I just know what I like... The sound you are looking for may have different requirements. I went for an efficient package, flexibility, clear bass without being boomy, and flexibility. Now if I could have gotten a II for close to the price of the BassLink, I would have gotten that one, it has more options (expansion that I probably won't use anyway.)
RUFFSTUFFKINGSLAND, GA · Oct 25, 2009#19 Originally Posted by
BurningSky ↑ you think the original is good enough? dont need 2 or t for a good sound? everything is so cheap in the states! cheapest ive found the original for over here is £150 which is around $250 :-(
You just got to know where to shop and who to buy from.
BurningSkyThread starterUK · Oct 25, 2009#20know any places in the uk? lol. ebay, google, and countless other independent retailers all say £150+ :-( Its tough to know which would be suitable for me. from what I can tell about the 4sc i wont be getting it so does that mean 2 has no advantages over 1?
BurningSkyThread starterUK · Oct 26, 2009#21RUFFSTUFFKINGSLAND, GA · Oct 26, 2009#22No data.