msmitkaOriginal postPennsylvania · Oct 9, 2009#1Replies 18
WeeYariGeorgetown, Ontario, Canada · Oct 9, 2009#2No changes have been made year over year. You're good.
msmitkaThread starterPennsylvania · Oct 9, 2009#3Thank you very much!
127.0.0.1NE · Oct 9, 2009#4I just installed a 2009 factory one on my 2010 5 door LB, the metal hook 90 deg was tiiiiight, but
it installed fine and works great.
so....I reckon the console is the same. I do not know about the specific one in that link.
I do miss arm rest storage. factory one is really just an armrest. nothing else. kinda bummed...
msmitkaThread starterPennsylvania · Oct 10, 2009#5Ordered it just now. It should be fine. And, as a new Yaris owner, today I just discovered that the area on the dash in front of the driver is yet another storage bin. :) This is great stuff.
kacWest/Central Illinois · Oct 10, 2009#6question has been answered... I'll just say I've gone through fazes of wishing I had one, and then being happy I don't... back and forth... if it was a little cheaper I'd already have one. Maybe someday.
Enjoy the new yaris!
birdmanUSA · Oct 14, 2009#7I find the material a bit coarse on bare arms during longer drives. I cut the foot out of a black cotton sock, turned it inside out and slid it bottom up over the arm rest to soften it. Add the other one if you want it softer yet.
msmitkaThread starterPennsylvania · Oct 16, 2009#8I should be able to confirm fit and upload a photo later today/tonight. It's scheduled for delivery today. Can't wait!
hatchbackkid82. · Oct 16, 2009#9I think you should be happy with it. I got mine from Garm a few weeks back and i'm pretty happy with it. Very comfortable, they should have come with this one from the factory
msmitkaThread starterPennsylvania · Oct 16, 2009#10 Originally Posted by
hatchbackkid82 ↑ I think you should be happy with it. I got mine from Garm a few weeks back and i'm pretty happy with it. Very comfortable, they should have come with this one from the factory
Hmm... it's very nicely made, but . . it just sits in there (cupholder)? Seems a bit wobbly, and although I see two phillips screws on the bottom of it, it sure doesn't seem like they'd secure it.
msmitkaThread starterPennsylvania · Oct 16, 2009#11I removed the felt-like disc at the bottom of the cupholder in the console, which revealed a hex screw. I removed the screw. Dropped in the armrest, but despite my best efforts, I can get that original screw (or the brass one shipped with the armrest) to reach down into the threads. It lines up OK, but it seems I'll need to dig around for a longer screw.
UPDATE: For the 2010 3 DR LB, I had to pick up an M6-1.00 X 30 Hex Cap Screw (Pack of 4 at Lowe's - Hillman P/N #880657).
That reached fine, and did a good job of securing it. Nice!
birdmanUSA · Oct 27, 2009#12The factory option armrest is tall and holds my elbow high enough where I can easily hold the steering wheel. It has a sturdy metal rod brace that secures it under the seat mounts. The cup holder is less vulnerable and deeper. It does flip up and out of the way but it lacks any storage. By adding a couple layers of extra padding inside and and a soft sock on the outside it really is perfect for me. Others with longer arms may not like it.
ern-dizCA all day · Oct 28, 2009#13 Originally Posted by
msmitka ↑ I removed the felt-like disc at the bottom of the cupholder in the console, which revealed a hex screw. I removed the screw. Dropped in the armrest, but despite my best efforts, I can get that original screw (or the brass one shipped with the armrest) to reach down into the threads. It lines up OK, but it seems I'll need to dig around for a longer screw.
UPDATE: For the 2010 3 DR LB, I had to pick up an M6-1.00 X 30 Hex Cap Screw (Pack of 4 at Lowe's - Hillman P/N #880657).
That reached fine, and did a good job of securing it. Nice!
+1
i have an '07 liftback, got the same arm rest from micro image and although i love the fit, the original screw nor the one provided will reach far enough to lock it down...i too am now planning a trip to the hardware store in order to get a bit longer screw...
on a side note, it actually fits quite snug even without screwing it down so, i've been considering just letting it sit there for easy removal if i ever wanted to...
bahri_3MALTA · Nov 9, 2009#14Can someone post some good photos from back/front of this arm rest in place etc so that I can have a clear picture how this look before buying one from microimageonline for my Vitz 2006? I am more interested about the look how it goes between the seats..!!!
anteup0527Vermont · Dec 16, 2010#15great post. just bought the center console in black. will be buying the screw too. thanks.
MarshmallowYarisMissouri · Dec 16, 2010#16I know I could get the basic black one and it would look fine in my Toy Car (2008 LB with that standard blue-dotted fabric), but I love getting my accessories with some color.
When this puppy comes with BLUE accent stitching I am ON IT.
Steve L.Jacksonville, Florida · Dec 18, 2010#17 Originally Posted by
msmitka ↑
Yes you can. I transfered my armrest from a 2009 HB Yaris to my 2010 HB Yaris. Everything fits.
cali yarisCanoga Park, CA · Dec 18, 2010#18 When this puppy comes with BLUE accent stitching I am ON IT.
I wonder. I just asked our supplier about this.
MarshmallowYarisMissouri · Dec 20, 2010#19 Originally Posted by
cali yaris ↑ I wonder. I just asked our supplier about this.
Please PM me if you find out if it can happen. I love the look of the red accent stitching, it just won't work with my interior. The blue would be perfect.