I have no idea how to sign up on that list though. How do I do it?
GI: RBK LB BODYKITS
236 posts · 71,372 views · page 3 of 5
Replies continued
I made a quick PS of the INGS rear bumper with the holes removed and also one on my car.
If you can make it like this, I'm really interested. The only problem will be shipping to Belgium...
(and it really fits with my spoiler 😉)
Picture not included in this copy
Picture not included in this copy
If you can make it like this, I'm really interested. The only problem will be shipping to Belgium...
(and it really fits with my spoiler 😉)
Picture not included in this copy
Picture not included in this copy
great PS job. Makes me want it even more. ;)
Please add yourself to my list (the one on this thread). I will make a note of all the 09's later. 👍Originally Posted by EleKid ↑Sign me up as one of the ten 09s
Nice PS! That is exactly what I'm planning to do. Unless of course, ppl prefer the RS design better.Originally Posted by Jochen ↑I made a quick PS of the INGS rear bumper with the holes removed and also one on my car.
Where do I send the payment? 🤤Originally Posted by tk-421 ↑Nice PS! That is exactly what I'm planning to do. Unless of course, ppl prefer the RS design better.
Looks like I missed some pages of this thread. Now I see you already photoshopped your idea of the rear bumper. :)
The only different with my PS is that I also removed the hole for the exhaust tip (since the exhaust tip of a diesel has a slightly different position)
The only different with my PS is that I also removed the hole for the exhaust tip (since the exhaust tip of a diesel has a slightly different position)
I was just thinking about that actually.
TK, is the hole going to be there or will you change the design so that the exhaust tip clears the bumper edge fully?
TK, is the hole going to be there or will you change the design so that the exhaust tip clears the bumper edge fully?
Good question! We should all think about this one...
Having a hole in there will probably be needed if you plan on having an aftermarket exhaust (or even just a tip) down the road.
I think we should keep it, but it's up to you guys to decide.
Having a hole in there will probably be needed if you plan on having an aftermarket exhaust (or even just a tip) down the road.
I think we should keep it, but it's up to you guys to decide.
C-ONE.. is my personal fav.
Alright then, let's keep the hole 🙂
How hard would it be to add your own holes/indents if there's no hole to allow a wide range of aftermarket exhausts?
Some people have center exit exhaust. Have to consider them. I'm not one but they are out there
^^^
Being one with a Center tip exhaust, it makes sense to do similar to what the Kaminari kit does, accent the sides but leave enough room for a normal exhaust or a center tip
Being one with a Center tip exhaust, it makes sense to do similar to what the Kaminari kit does, accent the sides but leave enough room for a normal exhaust or a center tip
i want no cut out on the rear bumper. yah, what sabre said. you're betting off with a universal design.
That's a good point. I will try to raise the bottom/center part a bit to accommodate for different exhaust positions. The only downside is that an extra rear lip may be required in order to be flush with the sideskirts.Originally Posted by Sabretooth ↑^^^
Being one with a Center tip exhaust, it makes sense to do similar to what the Kaminari kit does, accent the sides but leave enough room for a normal exhaust or a center tip
So i guess you still dont have a somekind of ballpark on the price of the full kit without the hood...Just would like know I might just beable to swing for the full kit by the time you have them ready...
How much are you guys willing to drop on a full kit? I hope to be able to post the prices within the next couple of days, but I would really like to know what the general consensus is first in order to try to match that price as closely as possible. TIA
I have no Idea what kind of price to put on this....Cause All i want is the sides/Fbumper/Rbumper..Seems like ive seem them on ebay fro 600.00 or so could be thinking of a crappy kit though...for like the 07-08'sOriginally Posted by tk-421 ↑How much are you guys willing to drop on a full kit? I hope to be able to post the prices within the next couple of days, but I would really like to know what the general consensus is first in order to try to match that price as closely as possible. TIA
$300/bumper is not too far from my current rough estimate, as long as the current interest carries on to actual buyers. The big problem so far is being able to afford the actual molds in order to start fabrication.
What about the other pieces, guys? What would you consider to be a fair price?
What about the other pieces, guys? What would you consider to be a fair price?
I would buy if you can do the whole kit FB/RB/SIDES for 6-700.00
I've been eyeing some of the kits offered on www.bodykits.com and www.body-kitz.com, which range from $700 to $1,200, but I've had other priorities on the list so far, that's why I didn't get anything yet.
If the quality of these RBK kits will match that of the RBK spoiler (which I absolutely love by the way), I will consider getting the RBK set and I believe $600-$700 is a good place to start, for the whole kit.
My biggest concern with such big parts is fitment; and in this case I'd trust an RBK set more than the stuff mentioned above. I've seen pictures from the RBK spoiler development process and I'm a believer 🙂
If the quality of these RBK kits will match that of the RBK spoiler (which I absolutely love by the way), I will consider getting the RBK set and I believe $600-$700 is a good place to start, for the whole kit.
My biggest concern with such big parts is fitment; and in this case I'd trust an RBK set more than the stuff mentioned above. I've seen pictures from the RBK spoiler development process and I'm a believer 🙂
A full RBK kit has 8 pieces (maybe 7, depending if the MI hood will be made by me or not), whereas the kits you guys are mentioning are only 4-piece kits. The price will be a bit higher because of a few factors, namely number of pieces, materials involved, consumer demand, and mold fabrication costs.Originally Posted by fmicle ↑If the quality of these RBK kits will match that of the RBK spoiler (which I absolutely love by the way), I will consider getting the RBK set and I believe $600-$700 is a good place to start, for the whole kit.
My biggest concern with such big parts is fitment; and in this case I'd trust an RBK set more than the stuff mentioned above. I've seen pictures from the RBK spoiler development process and I'm a believer 🙂Thanks for the props! I absolutely guarantee that the parts will fit perfectly.
i don't think a kit including a hood and spoiler could realistically be less than $1000. i'd expect a hood to be at least $300 on it's own. and the RBK spoiler is $175. that's close to $500 for just those two pieces. then you tack on a full 4 piece kit and you are talking at least 1k. and that's not including the eyelids. they don't seem like they'd drive up the cost too much though.
I would say atleast $900-1000 for the 7 piece kit and tack on another $300-400 for the hood if you make it.
I think the car is gonna look very busy with all these installed at once...
Could push beyond tacky.
Could push beyond tacky.
God I wish I could afford this kit and wheels... When my student loan comes in in Dec, I plan on buying some nice 17" lightweight summer wheels, which will cost me a pretty penny. My next upgrade might be a body kit, but there's no way I'll be able to afford both the wheels and a kit at the same time. (I refuse to buy a body kit while I still have stock wheels) I don't suppose you need a test/sponsored car in Indy? 😁
Well all i need is the FBumper/RBumper/Sidesskirts. Does this mean you are only gonna make a 8 piece kit...which i dont need..Originally Posted by tk-421 ↑A full RBK kit has 8 pieces (maybe 7, depending if the MI hood will be made by me or not), whereas the kits you guys are mentioning are only 4-piece kits. The price will be a bit higher because of a few factors, namely number of pieces, materials involved, consumer demand, and mold fabrication costs.
Thanks for the props! I absolutely guarantee that the parts will fit perfectly.
I'm not sure how much I like the idea of a wider grill, but bigger vertically would look pretty good I think, I did a nasty photo chop on the pic to demonstrate what I mean. (I think i like the Netz badge in the center of the grille)
1 attachment not included in this copy
So how many people do you have signed up for 09s so far?
Trust me, once we get the team working on this, the full kit will look really good. 👍Originally Posted by Sabretooth ↑I think the car is gonna look very busy with all these installed at once...
Could push beyond tacky.
Hopefully I'll be able to get the molds made so that more of you guys can get these later on. 👍Originally Posted by CtrlAltDefeat ↑God I wish I could afford this kit and wheels... When my student loan comes in in Dec, I plan on buying some nice 17" lightweight summer wheels, which will cost me a pretty penny. My next upgrade might be a body kit, but there's no way I'll be able to afford both the wheels and a kit at the same time. (I refuse to buy a body kit while I still have stock wheels) I don't suppose you need a test/sponsored car in Indy? 😁
I'll be making at least 2 more pieces. The rest are either already made, or still pending review.Originally Posted by gmodder ↑Well all i need is the FBumper/RBumper/Sidesskirts. Does this mean you are only gonna make a 8 piece kit...which i dont need..
Yeah I'm thinking I want it both wider and taller. Wider because I can get to do something like this:Originally Posted by CtrlAltDefeat ↑I'm not sure how much I like the idea of a wider grill, but bigger vertically would look pretty good I think, I did a nasty photo chop on the pic to demonstrate what I mean. (I think i like the Netz badge in the center of the grille)
Picture not included in this copy
... and taller because I think the Burnout might be a bit too narrow.
So far you're the 6th:Originally Posted by EleKid ↑So how many people do you have signed up for 09s so far?
- CTScott
- frownonfun
- IsLNdbOi
- ezhacker1
- gmodder
- EleKid
But I don't think I have you on my official list yet... Have you voted in the poll?
Yes! I voted for a front bumper, rear bumper, sideskirts, and a hood.
But do you think you can place me on the list for the special introductory pricing?
But do you think you can place me on the list for the special introductory pricing?
You got it! 👍
Thanks! 😁 These are looking great. Any idea of when the finished product will come about? So I know how long to scrimp and save hahaha
Looking at a late December/early January timeline in order to get everything done... Could be more, could be less...
Not too far away. Looking forward to these 😉
5 days left... Be sure you are in the list before then if you want a discount. 👍
About the rear bumper: Are you going to "remove" the hole for the exhaust tip (you can't really remove anything that isn't there 🙂)
I think it will be better to remove it just like some people said. That way people can cut it out by themself (in case they have center exhaust, L/R exhaust, or in my case a bit more to the right, ...) or just leave it like that with no hole.
And is there a difference between US and EU rear bumpers? So will it fit a EU Yaris?
I think it will be better to remove it just like some people said. That way people can cut it out by themself (in case they have center exhaust, L/R exhaust, or in my case a bit more to the right, ...) or just leave it like that with no hole.
And is there a difference between US and EU rear bumpers? So will it fit a EU Yaris?
So that list I'm on above is also a list of people getting the discount?
Still thinking about the best way to approach this...Originally Posted by Jochen ↑About the rear bumper: Are you going to "remove" the hole for the exhaust tip (you can't really remove anything that isn't there 🙂)
And is there a difference between US and EU rear bumpers? So will it fit a EU Yaris?As far as I can tell, EU and JDM bumpers are identical. This means that you probably won't be able to fit this bumper unless you get a USDM crash bar.
Yup. You're good. 👍Originally Posted by IsLNdbOi ↑So that list I'm on above is also a list of people getting the discount?
Just 3 more days to get your name on the list!
so are you still deciding to base the rear bumper off of the INGs rear bumper minus the stupid rocket booster holes?
Or have you done some contemplation on a direct-fit of an RS bumper style? <---- :D
Still taking interest, just the latter factor will make me fork out the green leaves...
Or have you done some contemplation on a direct-fit of an RS bumper style? <---- :D
Still taking interest, just the latter factor will make me fork out the green leaves...
I think most people are into the Ings idea... But if you think about it, it doesn't look too different from the RS if we take out the "rocket boosters"...
Most of the effect you see is due to the dual-color paint job.
Most of the effect you see is due to the dual-color paint job.
Are you going to post pics. of the final design of the front and rear bumpers and sideskirts?
It's not, but i feel like the bumper goes inward where the black part meets...
I dont mind the two-tone color, I'd like to have the bayoublue color and the matte grey/black on it.... my 5zigen exhaust fits nicely w/ the hole cut-out....
I'm going to have to see if your version goes inward as well or straight down like the RS...
I dont mind importing an RS, i just would hate to have to get a JDM crash-bar or a C-One...then in an accident find that crash bar again...etc....lol
Your route is cheaper in the long run for me...
I dont mind the two-tone color, I'd like to have the bayoublue color and the matte grey/black on it.... my 5zigen exhaust fits nicely w/ the hole cut-out....
I'm going to have to see if your version goes inward as well or straight down like the RS...
I dont mind importing an RS, i just would hate to have to get a JDM crash-bar or a C-One...then in an accident find that crash bar again...etc....lol
Your route is cheaper in the long run for me...
I wonder how well my Tanabe Medalion Touring will fit w/ that cutout on the rear bumper.