Yarisworld Archive

Shorter Serpentine Belt?

7 posts · 13,831 views

The ArchitectOriginal postFL · Oct 5, 2009#1
I may potentially need a shorter belt due to a smaller alternator pulley.

I believe the stock pulley is 3 inches and the one Ill be using would be 1 5/8 inches coupled with the %10 under drive pulley that make for an almost 2" loss.

Does anyone know How I would go about making up for this loss?

Replies 6

mikenacaratoBrentwood, TN · Oct 6, 2009#2
if your using the NST underdrive kit with the 3 pulleys then you dont need a new belt. the stock one will work fine.
ozmddDFW, TX · Oct 6, 2009#3
A NAPA store should be able to look-up a compatible belt in any length you need, if its made. Others could too, but NAPA stores seem to have more knowledgeable/willing staff.
lilredrocketDFW, Texas · Oct 6, 2009#4
Go out and buy like the next 3 smaller sized belts belt and test fit. That is what I had to do on a s/c install I did recently and then returned the ones I didn't need.
thebarberGrand Rapids, MI · Oct 6, 2009#5
i had to buy a smaller belt when i put the nst underdrive on....but i don't have a/c

went 36" to 35.5"
The ArchitectThread starterFL · Oct 6, 2009#6
thanks guys. dom at irragi alts has the half inch shorter version which should be just fine with the smaller diameter alt pulley (1 5/8)

i forgot how easy it is to move the alt forward and backwards to adjust.
thebarberGrand Rapids, MI · Apr 20, 2021#7
Originally Posted by thebarber ↑
ii had to buy a smaller belt when i put the nst underdrive on....but i don't have a/c

went 36" to 35.5"
grave digging for the #QCyaris!