Finished wiring the factory cc stalk and clutch switch. cruise not working. What should i look for? What order would you start trouble shooting?🤷
cruise control not working
11 posts · 5,151 views
Replies 10
Triple check that your are really on pin 40 on the ECM to start with. post a pic of your ECM connection if you want an extra set of eyes on it.
I will double check monday. I used the repair wire from toyota and counted the pins. No cel so i don't think i put it in the mirror image pin. I i will look tommorow.
here are the wiring hookups







ECM Pin 40 and clutch switch connections look good. On the clock spring connector, I can't tell what you have connected. In the orientation of that picture the bottom right wire should be the ECM pin 40 one and the one above it should be connected to ground.
ground should be below the horn, ecm to the left of ground? do we know were to get the pins for this conector ? I think the clockspring conector is not making good contact.
Here's picture of the ground wire location (the brown wire).Originally Posted by POORSHA ↑ground should be below the horn, ecm to the left of ground? do we know were to get the pins for this conector ? I think the clockspring conector is not making good contact.
The part number for the pin with a piece of wire attached is: 82998-12870

I ordered the pins and i will install them, I will also use a clutch wire jumper to make sure the switch is ok. Hope that fixes it.
My only problem with the cruise was the clutch switch, jammin connectors in the terminals on the fusebox connections never worked. Went through every connection in the entire car tracking down a loose crimp or a short didnt find anything. So I used quick splice connectors and actually tied into the wires for the clutch-switch, works great now.Originally Posted by POORSHA ↑I ordered the pins and i will install them, I will also use a clutch wire jumper to make sure the switch is ok. Hope that fixes it.
Thanks I will look there today
Flutie, you were right. I reatached the clutch switch wires and the cruise works. Thanks to all those who came before with this diy.