mr_eraserheadOriginal postManila, Philippines · Oct 3, 2009#1Fellow yarisworld members,
I'm from the Philippines i own a Extreme black Vios/Yaris Sedan and i need help in my newly installed ducktail. Its fiberglass molded form the XX limited edition grade vios/yaris ducktail. After purchasing the ducktail from a local store, i had it body colored in a auto paint shop. After installing the ducktail, i noticed that the fit of the ducktail isn't perfect! There is a gap in both ends of the ducktail! What can i do to solve this problem! It really bothers me everytime i look at it. I want it look perfect 🙁
As you can see from this angle it looks fine
Picture not included in this copy
But when we look at the sides,
Picture not included in this copy
The 3M double adhesive is visible
Picture not included in this copy
I need your help fellow yarisworld members! 🙁
what can i do to repair this? Someone told me about a sealant that can cover this up. I need your help. Thanks!
Replies 11
JayTee09Houston, Texas · Oct 4, 2009#2Go to autozone and get some 3M emblem glue a little of that stuff goes a long way
LEGATO``Virginia Beach · Oct 4, 2009#3...they don't have autozone in the philippines, i believe haha
but what he said may be right though, just get some glue from a auto store
yarisugiハワイ · Oct 4, 2009#4Please take a picture of the underside of the wing.
I assume it's a knock-off of the real wing?
Kaotic LazagnaCentral Valley, CA · Oct 4, 2009#5Hey. I'm assuming everything is held on by double-sided tape. So, get some masking tape, put it on the sides and mark both edges with a marker. This will be used as a guide point in the next few steps. Now, remove the spoiler and get rid of that extra thick tape. Go to an auto store or a hardware store, and buy some extra strength double-sided tape that's relatively thin. Next, slap that onto the spoiler and reattach the spoiler using those guide markings you made earlier.
mr_eraserheadThread starterManila, Philippines · Oct 4, 2009#6 Originally Posted by
Kaotic Lazagna ↑ Hey. I'm assuming everything is held on by double-sided tape. So, get some masking tape, put it on the sides and mark both edges with a marker. This will be used as a guide point in the next few steps. Now, remove the spoiler and get rid of that extra thick tape. Go to an auto store or a hardware store, and buy some extra strength double-sided tape that's relatively thin. Next, slap that onto the spoiler and reattach the spoiler using those guide markings you made earlier.
the problem here is that the wing's fit isn't perfect that's why that gap is visible. i don't want to spend again on buying a new wing just to have that "perfect fit". what can i do?
mr_eraserheadThread starterManila, Philippines · Oct 4, 2009#7by the way this is the original ducktail. mine's fiberglass (xx limited edition vios from the philippines)
Picture not included in this copy
frownonfunRGV, Texas · Oct 4, 2009#8 Originally Posted by
mr_eraserhead ↑ the problem here is that the wing's fit isn't perfect that's why that gap is visible. i don't want to spend again on buying a new wing just to have that "perfect fit". what can i do?
i think what kaotic is saying is some thinner double sided tape might help close that gap a little.
mr_eraserheadThread starterManila, Philippines · Oct 4, 2009#9 Originally Posted by
frownonfun ↑ i think what kaotic is saying is some thinner double sided tape might help close that gap a little.
yes i get what kaotic is trying to say. But my dilemma is that the wing itself is the one causing that gap. not the tape. on the left side of the wing, a part of the tape does'nt even get to stick on the car's body because the fit of the wing isn't flat perfect. what do i do? Do i need bend the wing somehow?
frownonfunRGV, Texas · Oct 4, 2009#10oh... i c. you could try sanding it down on the bottom side so it sits more flush. perhaps.
mr_eraserheadThread starterManila, Philippines · Oct 4, 2009#11 Originally Posted by
frownonfun ↑ oh... i c. you could try sanding it down on the bottom side so it sits more flush. perhaps.
ok ill try that. thanks!👍
JayTee09Houston, Texas · Oct 5, 2009#12^^ sorry wasnt paying attention to where the OP lived lol as far as it not fitting if it were abs you could try heating it but since its FC I would go with what Frownonfun said try sanding it