Yarisworld Archive

MMMMMMMMMMMidpipe

22 posts · 5,419 views

thebarberOriginal postGrand Rapids, MI · Oct 2, 2009#1
getting a resonator-to-axle piece fabbed up on my yaris as i type....

we'll see how the gains are when i get it back in a few hours...

any interest in a resonator-back exhaust or a resonator-axle piece...just thinking people other than me might like to get more than an axleback since the magnaflow is A: super expensive and B: only for the sedan... and the nitto makes you lose the catylitic converters and you need an o2 sensor extension....

Replies 21

cali yarisCanoga Park, CA · Oct 2, 2009#2
that would require cutting and welding the piece on. As long as people know it's not a bolt-on piece, it's a great idea!
hatchbackkid82. · Oct 2, 2009#3
i take it you want to keep your catalytic converter?
thebarberThread starterGrand Rapids, MI · Oct 2, 2009#4
keeping oem cat and resonator, cutting off the old exhaust and welding on a new one, essentially. the magnaflow exhaust for the yaris sedan does the same thing...but its 560$

i had to do the same w/ my magnaflow exhaust on my matrix, i know it makes a lot of people uneasy to cut/weld, but its not a big deal, stock can go back on if you part-out

interest..?
tk-421Dagobah · Oct 2, 2009#5
how wide is the pipe? is it mandrel bent? what's the price?
hatchbackkid82. · Oct 2, 2009#6
Hmmmm...... I would rather just buy the MP and bolt that on instead of cutting my OEM pipe. I just think it's easier🤷
WeeYariGeorgetown, Ontario, Canada · Oct 2, 2009#7
Originally Posted by thebarber ↑
we'll see how the gains are when i get it back in a few hours
Waiting for impressions. Interest depends on $ vs outcome. Nasty day for a little WOT though.
thebarberThread starterGrand Rapids, MI · Oct 2, 2009#8
easy depends on who you're getting to do it

and its just a feeler for now....2" is all we need if we keep the stock cat and resonator

but it depends on what pricing i can get

for a res-back exhaust itd be nice to come in under 500usd (that'd include a muffler)
thebarberThread starterGrand Rapids, MI · Oct 2, 2009#9
Originally Posted by WeeYari ↑
Waiting for impressions. Interest depends on $ vs outcome. Nasty day for a little WOT though.
true.

ill have to get on the highway and get on it. ;)
posaunemeisterKansas City, MO · Oct 2, 2009#10
Originally Posted by thebarber ↑
for a res-back exhaust itd be nice to come in under 500usd (that'd include a muffler)
It should be MUCH cheaper than that, even with a very good muffler. Don't get ripped off!
thebarberThread starterGrand Rapids, MI · Oct 2, 2009#11
mmmm, power to redline

2.25" crush bent aluminized steel midpipe....

Picture not included in this copy

Picture not included in this copy
posaunemeisterKansas City, MO · Oct 2, 2009#12
Cool. Now spray paint that bad boy... with some flat/gloss high heat black paint! 🙂

Do you mind stated the final price (including the muffler)? If you don't, I totally understand.
06silveryarisPuerto Rico · Oct 2, 2009#13
Looks good🎉
YaYa1320Southern Maryland · Oct 2, 2009#14
WORD!!!🎉
ruimondPerth, Australia · Oct 2, 2009#15
Same setup as mine pretty much, i think. Mine was cut at the same point. Then 2inch pipe bent from muffler to there. Can't see it as well on my photos.

Picture not included in this copy

Picture not included in this copy
thebarberThread starterGrand Rapids, MI · Oct 5, 2009#17
loving the midpipe. well worth the $
Saskatchewan17Aurora, IL · Oct 12, 2009#18
Very cool... but what are you really replacing? Putting straight pipe where straight pipe was in the MP section?
posaunemeisterKansas City, MO · Oct 13, 2009#19
Originally Posted by Saskatchewan17 ↑
Very cool... but what are you really replacing? Putting straight pipe where straight pipe was in the MP section?
It's a slightly larger diameter, I believe.
thebarberThread starterGrand Rapids, MI · Oct 13, 2009#20
Originally Posted by Saskatchewan17 ↑
Very cool... but what are you really replacing? Putting straight pipe where straight pipe was in the MP section?
replaced the stock piping from the resonator to the axle which is 1.75" with 2.25" crush-bent piping

ideally this will yield about 2" diameter thru, which is how big the cat's and resonators piping is
posaunemeisterKansas City, MO · Oct 13, 2009#21
Originally Posted by thebarber ↑
replaced the stock piping from the resonator to the axle which is 1.75" with 2.25" crush-bent piping

ideally this will yield about 2" diameter thru, which is how big the cat's and resonators piping is
Actually, the stock piping after the resonator is 1.5"!!! I measured the piping about 2 months ago after I hacked off my stock muffler. So, yeah, I can definitely see how your new mid-pipe can make a difference.
Saskatchewan17Aurora, IL · Oct 13, 2009#22
Wow ok. I see. That's teeeenny stock piping. I know that changing the CBE in an MS3 will only net you gains if you are pushing 300 whp. All the gains are in the Downpipe/Racepipe (hence deleting the cats). And stock piping is 2.5 inches, no severe bends in the CBE at all.