Yarisworld Archive

Photography Talk (Split Thread)

19 posts · 6,538 views

rickoOriginal postGeorgian Triangle Ont. · Apr 21, 2006#1
(Original thread can be found here: Back Seat Removal...)

So you're doing this for photography????? Quite a project. I'm a photographer as well, but only B+W landscapes, so I don't need to carry too much gear. In fact I try to keep it down to a small back-pack in size, as I often have to hike to location. You must be doing weddings or commercial stuff, model shoots etc. I know it's off topic, but what gear are you using????

Replies 18

IdjiitHolly Springs, NC · Apr 21, 2006#2
Well, the gear I'm stowing in this is an onsite printing rig - basically a kiosk setup so people can find and order photos. So it's a few pelican cases full of monitors, computers, stands, printers, supplies, etc. I shoot with a Canon 1D MKII and a variety of lenses - the FlyBall stuff this setup is for is mainly shot with the 135/2L although I do some stuff with the 35/1.4L and 85/1.8.
rickoThread starterGeorgian Triangle Ont. · Apr 21, 2006#3
Thanks for the info Idjiit. A very impressive set-up, much more high-tech than what I use. What printer, ink and paper combinations do you use?
I sell framed B+W prints of the Georgian Bay area through local galleries, so obviously on-site printing is not a requirement for me. I currently use Nikon film and digital cameras, Nikon lenses, and an Epson 1280 printer. I am limited to a max print size of 12"x16" by my equipment, but that doesn't seem to be an issue at this point. Thanks agin for the info, and I wish you continued success.

1 attachment not included in this copy

IdjiitHolly Springs, NC · Apr 21, 2006#4
Nice work.

Onsite we print with Epson PictureMates believe it or not. They're 4x6 printers, but these use the UltraChrome inks, so combined with the InkPress papers we use, the prints look pretty darned good. Back at the office we use an Epson R800 which is definitely much nicer. We typically do not get orders for prints larger for that, and for gallery showings for my other work I use wet process prints. A lot of the stuff I do is extremely high-ISO - most of it is between ISO 1600-6400 - so doing really big prints isn't feasible, even with the great quality we get with the various Canon bodies we use.

The paying stuff we do is dog sports:
Picture not included in this copy

My "personal" work is pretty varied, from standard portraiture type stuff:
Picture not included in this copy


To concert photography:
Picture not included in this copy

To my work with the Carolina RollerGirls:
Picture not included in this copy


To shooting for http://www.suicidegirls.com (warning: link is not work safe):
Picture not included in this copy
SmellyTofuSydney · Apr 21, 2006#5
Originally Posted by Idjiit
Well, the gear I'm stowing in this is an onsite printing rig - basically a kiosk setup so people can find and order photos. So it's a few pelican cases full of monitors, computers, stands, printers, supplies, etc. I shoot with a Canon 1D MKII and a variety of lenses - the FlyBall stuff this setup is for is mainly shot with the 135/2L although I do some stuff with the 35/1.4L and 85/1.8.
That's a fair bit of gear. Have you considered also a roof pod? They are lockable and probably suited to your bulky but "lighter" items and keep the important things inside the cabin area?

Btw, nice pics... good to see photogs here. I wish I could sell my pics but then again, I don't setup stalls to sell them. I haven't found a really cost effective way to frame up things. To make matters worse, I vary from different genré but I do get a kick out of doing photojournalism involving people. Just need that 1D2. :)
IdjiitHolly Springs, NC · Apr 21, 2006#6
Eh, not many people need the MKII. ;) Even Canon's entry-level cameras can produce stunning photos. We have an XT as well, which I absolutely adore. Can't really use it for sports work though, which is why I have the MKII.

As for storage... A roof pod won't really work. First off, it's not secure enough, and second of all the cases are awkward enough that it would be very difficult to get them up there. We're talking about around 150-200lbs of gear, so inside the car is best. The idea is to have casual thieves not even notice anything is in there, and then there's the alarm and the locking decks if they try to go for it.
rickoThread starterGeorgian Triangle Ont. · Apr 21, 2006#7
Excellent images Idjiit, and you are right the PictureMate does a fine job with the small stuff. I've found that the demand for the big prints just isn't there for me. Most of my sales are 8x10 and 11x14 framed prints. In the future I hope to buy an Epson 2400, for it's superior B+W performance and archival qualities. Nice seeing your stuff.
To Smelly ..... I don't know where you live, but you might start by trying to get a "show" at a local restaurant or coffee shop. Offer to display your work for 4-6 weeks, and give them a 30-40% cut on sales they make on your behalf. Have an "opening" and invite all your friends for a real party. With any luck you'll sell a couple of prints, and cover the costs of your framing. If not your friends and family will get framed prints for Christmas. In any event the experience alone is worth the cost.
BTW - Do your own framing, it isn't that difficult and is a whole lot cheaper.
SmellyTofuSydney · Apr 21, 2006#8
Well, for photojournalism, nothing beats that deep buffer (RAW shooter only).. I've got a 10D and 350D and whilst it's adequate for everything that's not photojournalism and motor sports (that I tend to do more of but really don't really "like" doing), it's fine for everything else.

Picture not included in this copy

I wasn't saying to put precious stuff there. I was referring to stuff like banners.. light stuff. I wouldn't put any cases up there. Having driven interstate in a Yaris, whilst it was fine with 2 people aboard, if I was to carry anything more, I'd consider a roof pod.
stuffyontario, canada · Apr 21, 2006#9
excellent photos guys
SmellyTofuSydney · Apr 21, 2006#10
Originally Posted by ricko
BTW - Do your own framing, it isn't that difficult and is a whole lot cheaper.
Yeah, I have to get the cutters and some practice to get that right. I've got some of the boards to cut.
rickoThread starterGeorgian Triangle Ont. · Apr 21, 2006#11
Great shot Smelly, you should consider organizing a show. You don't need fancy expensive frames, the ones I use cost less than $30 (Can.) including mats.
rickoThread starterGeorgian Triangle Ont. · Apr 21, 2006#12
BTW - I use pre-cut mats, but cutting your own is cheaper.
SmellyTofuSydney · Apr 21, 2006#13
I think I am getting confused with borders and frames. I meant borders... I just think doing frames might be an individual thing. Some people might not like the frame I put them in.
rickoThread starterGeorgian Triangle Ont. · Apr 21, 2006#14
When you start ........ frame the way YOU think looks best for your work, and what fits your budget. Any time someone shows interest, you can always offer to sell them the print alone, so they can make their own framing choices OR you can offer to do the framing according to their tastes.
SmellyTofuSydney · Apr 21, 2006#15
Thx for the tips. I'm starting to gather some fairly acceptable shots so I might as well start making prints out of them.
IdjiitHolly Springs, NC · Apr 21, 2006#16
Originally Posted by SmellyTofu
I wasn't saying to put precious stuff there. I was referring to stuff like banners.. light stuff. I wouldn't put any cases up there. Having driven interstate in a Yaris, whilst it was fine with 2 people aboard, if I was to carry anything more, I'd consider a roof pod.
The big problem really is the cases. There's not enough "light stuff" to justify external storage. The only thing that isn't cases is our weekend clothing bag, a camera bag and the dogs.
paultyler_82USA · Aug 20, 2006#17
Idjiit, this is sort of unrelated to the thread, but what do you think about the Olympus Evolt series of Digital SLRs for someone like me, hobbyist photographer. I'm thinking about the E-500, 8.1 Megapixel, compatible with all Zuiko digital-specific lenses. It also uses CompactFlash and xD for storage which is what my entire collection of flash media currently consists of anyway.
argylesocksmanch · Aug 22, 2006#18
Originally Posted by Idjiit

To shooting for http://www.suicidegirls.com (warning: link is not work safe):
Picture not included in this copy

if you ever need any help loading & unloading during anyone of ur SG shoots....let me know.
chongopantsHouston · Jul 8, 2009#19
wow you worked for SG, you lucky bastard.